On Wed, 2019-01-30 at 08:16 +0100, Christophe Leroy wrote:
> In transfer_to_handler() (entry_32.S), we have:
>
> #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
> ...
> #ifdef CONFIG_SMP
> CURRENT_THREAD_INFO(r9, r1)
> lwz r9,TI_CPU(r9)
> slwir9,r9,3
> add r11,
Hi All,
On 2019-01-18 12:37, Christoph Hellwig wrote:
> Hi all,
>
> this series fixes a rather gross layering violation in videobuf2, which
> pokes into arm DMA mapping internals to get a DMA address for memory that
> does not have a page structure, and to do so fixes up the dma_map_resource
> imp
On 31/01/2019 00:35, Michael Ellerman wrote:
> Reza Arbab writes:
>
>> On Tue, Jan 29, 2019 at 08:37:28PM +0530, Aneesh Kumar K.V wrote:
>>> Not sure what the fix is about. We set the related hash pte flags via
>>>
>>> if ((pteflags & _PAGE_CACHE_CTL) == _PAGE_TOLERANT)
>>> rfl
Finally got around to making this more or less work. I didn't quite
know where it would end up, so I haven't got patches in clean pieces
yet. But for this RFC I would rather consider the end result from a
higher level (mainly of kernel/exceptions-64s.S new style of macros).
There are two motivatio
The IODA reset is used to flush out any OS controlled state from the PHB.
This reset can fail if a PHB fatal error has occurred in early boot,
probably due to a because of a bad device. We already do a fundemental
reset of the device in some cases, so this patch just adds a test to force
a full res
On 01/31/2019 02:21 PM, Tyrel Datwyler wrote:
> On 01/31/2019 01:53 PM, Michael Bringmann wrote:
>> On 1/30/19 11:38 PM, Michael Ellerman wrote:
>>> Michael Bringmann writes:
This patch is to check for cede'ed CPUs during LPM. Some extreme
tests encountered a problem ehere Linux has put
On 1/31/19 4:21 PM, Tyrel Datwyler wrote:
> On 01/31/2019 01:53 PM, Michael Bringmann wrote:
>> On 1/30/19 11:38 PM, Michael Ellerman wrote:
>>> Michael Bringmann writes:
This patch is to check for cede'ed CPUs during LPM. Some extreme
tests encountered a problem ehere Linux has put som
On 01/31/2019 01:53 PM, Michael Bringmann wrote:
> On 1/30/19 11:38 PM, Michael Ellerman wrote:
>> Michael Bringmann writes:
>>> This patch is to check for cede'ed CPUs during LPM. Some extreme
>>> tests encountered a problem ehere Linux has put some threads to
>>> sleep (possibly to save energy
On 1/30/19 11:38 PM, Michael Ellerman wrote:
> Michael Bringmann writes:
>> This patch is to check for cede'ed CPUs during LPM. Some extreme
>> tests encountered a problem ehere Linux has put some threads to
>> sleep (possibly to save energy or something), LPM was attempted,
>> and the Linux kern
Enable kernel XZ compression option on 44x.
Tested on a Western Digital - MyBook Live NAS.
It takes 22 seconds for the 800 MHz CPU to decompress
and boot a 2.63 MiB XZ-compressed kernel simpleImage.
Signed-off-by: Christian Lamparter
---
arch/powerpc/Kconfig | 2 +-
1 file changed, 1 insertion(+
Since commit c40dd2f76644 ("powerpc: Add System RAM to /proc/iomem")
it is possible to use the generic walk_system_ram_range() and
the generic page_is_ram().
Fixes: c40dd2f76644 ("powerpc: Add System RAM to /proc/iomem")
Signed-off-by: Christophe Leroy
---
arch/powerpc/Kconfig| 3 --
By delaying the setting of MSR_RI, a 1% improvment is optained on
null_syscall selftest on an mpc8321.
Without this patch:
root@vgoippro:~# ./null_syscall
1134.33 ns 378.11 cycles
With this patch:
root@vgoippro:~# ./null_syscall
1121.85 ns 373.95 cycles
The drawback is that a mac
On Thu, Jan 31, 2019 at 06:30:22PM +0800, Peter Xu wrote:
> The change_pte() notifier was designed to use as a quick path to
> update secondary MMU PTEs on write permission changes or PFN changes.
> For KVM, it could reduce the vm-exits when vcpu faults on the pages
> that was touched up by KSM. I
Hi Marek,
can chance you could retest the v2 version?
On Mon, Jan 21, 2019 at 12:06 AM Mike Rapoport wrote:
>
> Add check for the return value of memblock_alloc*() functions and call
> panic() in case of error.
> The panic message repeats the one used by panicing memblock allocators with
> adjustment of parameters to include only relevant ones.
>
> T
Le 18/05/2018 à 01:00, Segher Boessenkool a écrit :
On Fri, May 18, 2018 at 08:30:27AM +1000, Benjamin Herrenschmidt wrote:
On Thu, 2018-05-17 at 14:23 -0500, Segher Boessenkool wrote:
On Thu, May 17, 2018 at 01:06:10PM +1000, Benjamin Herrenschmidt wrote:
The current asm statement in __pat
Hi Christoph,
I compiled kernels for the X5000 and X1000 from your branch
'powerpc-dma.6' today.
Gitweb:
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
The X1000 and X5000 boot but unfort
The change_pte() notifier was designed to use as a quick path to
update secondary MMU PTEs on write permission changes or PFN changes.
For KVM, it could reduce the vm-exits when vcpu faults on the pages
that was touched up by KSM. It's not used to do cache invalidations,
for example, if we see the
Le 30/01/2019 à 12:43, Michael Ellerman a écrit :
Christophe Leroy writes:
In transfer_to_handler() (entry_32.S), we have:
#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
...
#ifdef CONFIG_SMP
CURRENT_THREAD_INFO(r9, r1)
lwz r9,TI_CPU(r9)
slwir9,r9,3
Adding Simon who wrote the code.
Chandan Rajendra writes:
> When executing fstests' generic/026 test, I hit the following call trace,
>
> [ 417.061038] BUG: Unable to handle kernel data access at 0xc0062ac4
> [ 417.062172] Faulting instruction address: 0xc0092240
> [ 417.062242
40x/booke have another path to reach 3f from transfer_to_handler,
make sure it also calls ACCOUNT_CPU_USER_ENTRY() when
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is selected.
Signed-off-by: Christophe Leroy
---
v2: left inside the user entry path
arch/powerpc/kernel/entry_32.S | 12 +++-
1 fil
Some stack pointers used to also be thread_info pointers
and were called tp. Now that they are only stack pointers,
rename them sp.
Signed-off-by: Christophe Leroy
---
arch/powerpc/kernel/irq.c | 17 +++--
arch/powerpc/kernel/setup_64.c | 11 +++
2 files changed, 10 inse
Now that current_thread_info is located at the beginning of 'current'
task struct, CURRENT_THREAD_INFO macro is not really needed any more.
This patch replaces it by loads of the value at PACACURRENT(r13).
Signed-off-by: Christophe Leroy
---
arch/powerpc/include/asm/exception-64s.h | 4 +
Now that thread_info is similar to task_struct, its address is in r2
so CURRENT_THREAD_INFO() macro is useless. This patch removes it.
This patch also moves the 'tovirt(r2, r2)' down just before the
reactivation of MMU translation, so that we keep the physical address
of 'current' in r2 until then
The table of pointers 'current_set' has been used for retrieving
the stack and current. They used to be thread_info pointers as
they were pointing to the stack and current was taken from the
'task' field of the thread_info.
Now, the pointers of 'current_set' table are now both pointers
to task_str
thread_info is not anymore in the stack, so the entire stack
can now be used.
There is also no risk anymore of corrupting task_cpu(p) with a
stack overflow so the patch removes the test.
When doing this, an explicit test for NULL stack pointer is
needed in validate_sp() as it is not anymore impli
This patch activates CONFIG_THREAD_INFO_IN_TASK which
moves the thread_info into task_struct.
Moving thread_info into task_struct has the following advantages:
- It protects thread_info from corruption in the case of stack
overflows.
- Its address is harder to determine if stack addresses are
leak
This patch cleans the powerpc kernel before activating
CONFIG_THREAD_INFO_IN_TASK:
- The purpose of the pointer given to call_do_softirq() and
call_do_irq() is to point the new stack ==> change it to void* and
rename it 'sp'
- Don't use CURRENT_THREAD_INFO() to locate the stack.
- Fix a few comment
This patch renames THREAD_INFO to TASK_STACK, because it is in fact
the offset of the pointer to the stack in task_struct so this pointer
will not be impacted by the move of THREAD_INFO.
Signed-off-by: Christophe Leroy
Reviewed-by: Nicholas Piggin
---
arch/powerpc/kernel/asm-offsets.c| 2 +-
[text copied from commit 9bbd4c56b0b6
("arm64: prep stack walkers for THREAD_INFO_IN_TASK")]
When CONFIG_THREAD_INFO_IN_TASK is selected, task stacks may be freed
before a task is destroyed. To account for this, the stacks are
refcounted, and when manipulating the stack of another task, it is
nece
When moving to CONFIG_THREAD_INFO_IN_TASK, the thread_info 'cpu' field
gets moved into task_struct and only defined when CONFIG_SMP is set.
This patch ensures that TI_CPU is only used when CONFIG_SMP is set and
that task_struct 'cpu' field is not used directly out of SMP code.
Signed-off-by: Chri
When activating CONFIG_THREAD_INFO_IN_TASK, linux/sched.h
includes asm/current.h. This generates a circular dependency.
To avoid that, asm/processor.h shall not be included in mmu-hash.h
In order to do that, this patch moves into a new header called
asm/task_size_user64.h the information from asm/
40x/booke have another path to reach 3f from transfer_to_handler,
make sure it also calls ACCOUNT_CPU_USER_ENTRY() when
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is selected.
Signed-off-by: Christophe Leroy
---
arch/powerpc/kernel/entry_32.S | 12 +++-
1 file changed, 7 insertions(+), 5 deletion
The purpose of this serie is to activate CONFIG_THREAD_INFO_IN_TASK which
moves the thread_info into task_struct.
Moving thread_info into task_struct has the following advantages:
- It protects thread_info from corruption in the case of stack
overflows.
- Its address is harder to determine if stac
Since only the virtual address of allocated blocks is used,
lets use functions returning directly virtual address.
Those functions have the advantage of also zeroing the block.
Suggested-by: Mike Rapoport
Acked-by: Mike Rapoport
Signed-off-by: Christophe Leroy
---
arch/powerpc/kernel/irq.c
Hi Mike,
On Thu, 31 Jan 2019 09:40:18 +0200 Mike Rapoport wrote:
>
> Andrew, can you please add the below patch to as a fixup to "treewide: add
> checks for the return value of memblock_alloc*()"?
I have added that to linux-next for tomorrow (in case Andrew doesn't
get to it).
> From 854f54b9d4
36 matches
Mail list logo
