Some sort of commit message enlisting what we copied from where and
which all header file references have changed will be helpful here.
On 11/23/2015 03:52 PM, Aneesh Kumar K.V wrote:
> Acked-by: Scott Wood
> Signed-off-by: Aneesh Kumar K.V
> ---
> arch/powerpc/include/asm/{pgtable-ppc32.h => n
On 11/23/2015 03:52 PM, Aneesh Kumar K.V wrote:
> +extern struct page *pmd_page(pmd_t pmd);
> static inline pte_t pud_pte(pud_t pud)
> {
> return __pte(pud_val(pud));
> @@ -294,15 +115,14 @@ static inline void pgd_set(pgd_t *pgdp, unsigned long
> val)
> * Find an entry in a page-table-di
On 11/23/2015 03:52 PM, Aneesh Kumar K.V wrote:
> We copy only needed PTE bits define from pte-common.h to respective
> hash related header. This should greatly simply later patches in which
Will it be simplify
> we are going to change the pte f
On BMC machines, console output is controlled by the OPAL firmware and is
only flushed when its pollers are called. When the kernel is in a panic
state, it no longer calls these pollers and thus console output does not
completely flush, causing some output from the panic to be lost.
This patch ad
The STD_EXCEPTION_PSERIES macro takes both a vector number, and a
location (memory address). However both are always identical, so combine
them to save repeating ourselves.
This does mean an exception handler must always exist at the location in
memory that matches its vector number. But that's OK
This is only used in one location, open code it.
Signed-off-by: Michael Ellerman
---
arch/powerpc/include/asm/ppc_asm.h | 13 -
arch/powerpc/kernel/entry_64.S | 8 +++-
2 files changed, 7 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc_asm.h
b/arch
HMT_MEDIUM_LOW_HAS_PPR is only used in once place, open code it.
Signed-off-by: Michael Ellerman
---
arch/powerpc/include/asm/ppc_asm.h | 5 -
arch/powerpc/kernel/entry_64.S | 6 +-
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc_asm.h
b/a
HMT_MEDIUM_PPR_DISCARD is a macro which is present at the start of most
of our first level exception handlers. It conditionally executes a
HMT_MEDIUM instruction, which sets the processor priority to medium.
On on modern systems, ie. Power7 and later, it is nop'ed out at boot.
All it does is make
Currently if you are in xmon without an oops etc. to view the kernel
version you have to type "d $linux_banner" - not necessarily obvious. As
this is useful information, append to the output of "e" command.
Example output:
$mon> e
cpu 0x1: Vector: 0 at [c000f879ba80]
pc: c0081718:
Hi Rashmica,
Can you make your subject "powerpc/xmon: ...".
On Wed, 2015-11-25 at 10:37 +1100, Rashmica Gupta wrote:
> Currently if you are in xmon without an oops etc. to view the kernel version
> you have to type "d $linux_banner" - not necessarily obvious. As this is
> useful information, a
Thanks Vaibhav! This should definitely help people avoid pain in this
corner case :)
Acked-by: Ian Munsie
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
On Tue, Nov 24, 2015 at 05:21:30PM -0600, Rob Herring wrote:
> On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
> > ESAI need to enable the spba clock, when sdma is using share peripheral
> > script. In this case, there is two spba master port is used, if don't
> > enable the clock, t
Currently if you are in xmon without an oops etc. to view the kernel version
you have to type "d $linux_banner" - not necessarily obvious. As this is useful
information, append to the output of "e" command.
Signed-off-by: Rashmica Gupta
---
arch/powerpc/xmon/xmon.c | 2 ++
1 file changed, 2 in
On Tue, Nov 24, 2015 at 03:03:30PM +0800, Shengjiu Wang wrote:
> ASRC need to enable the spba clock, when sdma is using share peripheral
> script. In this case, there is two spba master port is used, if don't
> enable the clock, the spba bus will have arbitration issue, which may
> cause read/write
On Tue, Nov 24, 2015 at 03:03:29PM +0800, Shengjiu Wang wrote:
> SPDIF need to enable the spba clock, when sdma is using share peripheral
> script. In this case, there is two spba master port is used, if don't
> enable the clock, the spba bus will have arbitration issue, which may
> cause read/writ
On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
> ESAI need to enable the spba clock, when sdma is using share peripheral
> script. In this case, there is two spba master port is used, if don't
> enable the clock, the spba bus will have arbitration issue, which may
> cause read/write
On Tue, Nov 24, 2015 at 02:52:44PM +0800, Jia Hongtao wrote:
> Add bindings documentation for TMU (Thermal Monitoring Unit) on QorIQ
> platform.
>
> Signed-off-by: Jia Hongtao
> Reviewed-by: Scott Wood
Acked-by: Rob Herring
> ---
> .../devicetree/bindings/thermal/qoriq-thermal.txt | 63
> +
The ml command in xmon currently only works for 32-bit values and so fails
to find 64-bit values on a ppc64 machine. So change to work for 64-bit
values.
This is based off a patch by Josh Boyer.
Signed-off-by: Rashmica Gupta
---
Based off this patch: http://patchwork.ozlabs.org/patch/90309/
a
On 11/24/2015 07:23 PM, Bjorn Helgaas wrote:
On Wed, Nov 04, 2015 at 10:00:15AM -0200, Guilherme G. Piccoli wrote:
Bjorn, ping?
Sorry, Guilherme, this dropped off my radar, and I can't remember why.
I'll take a look at it soon.
Bjorn
Thanks very much Bjorn!
Sorry to bother, by the way.
Ch
On Wed, Nov 04, 2015 at 10:00:15AM -0200, Guilherme G. Piccoli wrote:
> Bjorn, ping?
Sorry, Guilherme, this dropped off my radar, and I can't remember why.
I'll take a look at it soon.
Bjorn
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
ht
On 10/21/2015 12:17 PM, Guilherme G. Piccoli wrote:
Commit 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel
doesn't support MSI") changed the location of the code that initializes
dev->msi_cap/msix_cap and disables MSI/MSI-X interrupts at PCI probe
time in devices that have this
On 11/23/2015 10:21 AM, Ming Lei wrote:
On Mon, 23 Nov 2015 10:46:20 +0800
Ming Lei wrote:
Hi Mark,
On Mon, Nov 23, 2015 at 9:50 AM, Mark Salter wrote:
On Mon, 2015-11-23 at 08:36 +0800, Ming Lei wrote:
On Mon, Nov 23, 2015 at 7:20 AM, Mark Salter wrote:
On Sun, 2015-11-22 at 00:56 +0800
Hi Michael,
On 11/09/2015 07:21 PM, Michael Ellerman wrote:
> Hi John,
>
> On Tue, 2015-11-03 at 11:21 -0600, John Allen wrote:
>> This patch fixes a bug where a kernel warning is triggered when performing
>> a memory hotplug on ppc64. This warning may also occur on any architecture
>> that has m
./drmgr -c cpu -a -r gives the following warning:
[ 2327.035563]
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
[ 2327.035564] no locks held by swapper/12/0.
[ 2327.035565]
stack backtrace:
[ 2327.035567] CPU: 12 PID: 0 Comm: swapper/12 Tainted: G S
4.3.0-rc3-0006
TRACE_EVENT_FN can't be used in some circumstances
like invoking trace functions from offlined CPU due
to RCU usage.
This patch adds the TRACE_EVENT_FN_COND macro
to make such trace points conditional.
Signed-off-by: Denis Kirjanov
---
include/linux/tracepoint.h | 4
include/trace/define
On 11/24/15, Russell Currey wrote:
> On BMC machines, console output is controlled by the OPAL firmware and is
> only flushed when its pollers are called. When the kernel is in a panic
> state, it no longer calls these pollers and thus console output does not
> completely flush, causing some outp
On Tue, Nov 24, 2015 at 08:18:17AM -0600, Scott Wood wrote:
> On Tue, 2015-11-24 at 14:55 +0800, Jia Hongtao wrote:
> > Register the qoriq cpufreq driver as a cooling device, based on the
> > thermal device tree framework. When temperature crosses the passive trip
> > point cpufreq is used to throt
On Tue, 2015-11-24 at 14:55 +0800, Jia Hongtao wrote:
> Register the qoriq cpufreq driver as a cooling device, based on the
> thermal device tree framework. When temperature crosses the passive trip
> point cpufreq is used to throttle CPUs.
>
> Signed-off-by: Jia Hongtao
> Reviewed-by: Scott Wood
On 11/24/15, Aneesh Kumar K.V wrote:
> Denis Kirjanov writes:
>
>> On 11/23/15, Aneesh Kumar K.V wrote:
>>> We support THP only with book3s_64 and 64K page size. Move
>>> THP details to hash64-64k.h to clarify the same.
> ...
>
>>> -static inline void hpte_do_hugepage_flush(struct mm_struct *mm,
I was looking for an error on MPC8270 processor 100 Mbps Ethernet FCC port.
The port may become locked if it is set to AUTO, while the peer is forced to
100 Mbs full duplex (non AUTO).
I was looking for an error in the area of collision handling of the driver.
It looks like I found the problem.
On Tue, 2015-11-24 at 22:26 +1100, Michael Ellerman wrote:
> Most users of RTAS (Run-Time Abstraction Services) use rtas_call(),
> which deals with locking as well as endian handling.
>
> However we have two users outside of rtas.c that can't use rtas_call()
> because they have different locking
There are no longer any users of enter_rtas() outside of rtas.c, so make
it "private", by moving the declaration inside rtas.c. Hopefully this
will encourage people to use one of the wrappers which takes the sharp
edges off the RTAS calling sequence.
Signed-off-by: Michael Ellerman
---
arch/powe
Although call_rtas_display_status() does actually want to use the
regular RTAS locking, it doesn't want the extra logic that is in
rtas_call(), so currently it open codes the logic.
Instead we can use rtas_call_unlocked(), after taking the RTAS lock.
Signed-off-by: Michael Ellerman
---
arch/pow
Avoid open coding the logic by using rtas_call_unlocked().
Signed-off-by: Michael Ellerman
---
arch/powerpc/platforms/pseries/hotplug-cpu.c | 11 +++
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c
b/arch/powerpc/platforms/pseri
Avoid open coding the logic by using rtas_call_unlocked().
Signed-off-by: Michael Ellerman
---
arch/powerpc/xmon/xmon.c | 16 ++--
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 786bf01691c9..ff31e70b81e8 10064
Most users of RTAS (Run-Time Abstraction Services) use rtas_call(),
which deals with locking as well as endian handling.
However we have two users outside of rtas.c that can't use rtas_call()
because they have different locking requirements.
The hotplug CPU code can't take the RTAS lock because t
On 11/23/2015 03:52 PM, Aneesh Kumar K.V wrote:
> Keep it seperate to make rebasing easier
This is confusing considering the fact that we are in between
some renaming/moving of header files, changing the references
they had before and so on. Could you please elaborate a bit
about what kind of chan
Denis Kirjanov writes:
> On 11/23/15, Aneesh Kumar K.V wrote:
>> We support THP only with book3s_64 and 64K page size. Move
>> THP details to hash64-64k.h to clarify the same.
...
>> -static inline void hpte_do_hugepage_flush(struct mm_struct *mm,
>> - unsig
On 11/23/2015 03:52 PM, Aneesh Kumar K.V wrote:
> This further make a copy of pte defines to book3s/64/hash*.h. This
> remove the dependency on ppc64-4k.h and ppc64-64k.h
>
These files are pgtable-ppc64-4k.h and pgtable-ppc64-64k.h instead.
> Acked-by: Scott Wood
> Signed-off-by: Aneesh Kumar K
Presently when a user-space process issues CXL_IOCTL_START_WORK ioctl we
store the pid of the current task_struct and use it to get pointer to
the mm_struct of the process, while processing page or segment faults
from the capi card. However this causes issues when the thread that had
originally iss
On 11/23/15, Aneesh Kumar K.V wrote:
> We support THP only with book3s_64 and 64K page size. Move
> THP details to hash64-64k.h to clarify the same.
>
> Acked-by: Scott Wood
> Signed-off-by: Aneesh Kumar K.V
> ---
> arch/powerpc/include/asm/book3s/64/hash-64k.h | 126 +
> arch/power
On 11/23/15, Aneesh Kumar K.V wrote:
> For a pte entry we will have _PAGE_PTE set. Our pte page
> address have a minimum alignment requirement of HUGEPD_SHIFT_MASK + 1.
> We use the lower 7 bits to indicate hugepd. ie.
>
> For pmd and pgd we can find:
> 1) _PAGE_PTE set pte -> indicate PTE
> 2) bi
ASRC need to enable the spba clock, when sdma is using share peripheral
script. In this case, there is two spba master port is used, if don't
enable the clock, the spba bus will have arbitration issue, which may
cause read/write wrong data from/to ASRC registers
Signed-off-by: Shengjiu Wang
---
On Tue, Nov 24, 2015 at 05:19:31PM +0800, Shengjiu Wang wrote:
> add spba clock for fsl audio IP
>
> Changes in V3
> - add error check for spba clock
>
> Shengjiu Wang (3):
> ASoC: fsl_esai: spba clock is needed by esai device
> ASoC: fsl_spdif: spba clk is needed by spdif device
> ASoC: fs
SPDIF need to enable the spba clock, when sdma is using share peripheral
script. In this case, there is two spba master port is used, if don't
enable the clock, the spba bus will have arbitration issue, which may
cause read/write wrong data from/to SPDIF registers.
Signed-off-by: Shengjiu Wang
--
ESAI need to enable the spba clock, when sdma is using share peripheral
script. In this case, there is two spba master port is used, if don't
enable the clock, the spba bus will have arbitration issue, which may
cause read/write wrong data from/to ESAI registers.
Signed-off-by: Shengjiu Wang
---
add spba clock for fsl audio IP
Changes in V3
- add error check for spba clock
Shengjiu Wang (3):
ASoC: fsl_esai: spba clock is needed by esai device
ASoC: fsl_spdif: spba clk is needed by spdif device
ASoC: fsl_asrc: spba clock is needed by asrc device
Documentation/devicetree/bindings/s
On 11/23/2015 03:52 PM, Aneesh Kumar K.V wrote:
> +++ b/arch/powerpc/include/asm/book3s/pgtable.h
> @@ -0,0 +1,10 @@
> +#ifndef _ASM_POWERPC_BOOK3S_PGTABLE_H
> +#define _ASM_POWERPC_BOOK3S_PGTABLE_H
> +
> +#ifdef CONFIG_PPC64
> +#include
> +#else
> +#include
> +#endif
> +
> +#endif
Just as other
On Tue, Nov 24, 2015 at 12:33:45AM -0800, Nicolin Chen wrote:
> On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
>
> > @@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream
> > *substream,
> > ret = clk_prepare_enable(esai_priv->coreclk);
> > if (ret)
> >
On 11/23/2015 03:52 PM, Aneesh Kumar K.V wrote:
> diff --git a/arch/powerpc/include/asm/pte-hash64-4k.h
> b/arch/powerpc/include/asm/book3s/64/hash-4k.h
> similarity index 99%
> rename from arch/powerpc/include/asm/pte-hash64-4k.h
> rename to arch/powerpc/include/asm/book3s/64/hash-4k.h
> index c1
Hi,
I have reviewed the code and in my opinion the line
last_tx_bd = fep->tx_bd_base + (fpi->tx_ring *
sizeof(cbd_t));
should be replaced with
last_tx_bd = fep->tx_bd_base + ((fpi->tx_ring-1) *
sizeof(cbd_t));
In the original code
On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
> @@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream
> *substream,
> ret = clk_prepare_enable(esai_priv->coreclk);
> if (ret)
> return ret;
> + ret = clk_prepare_enable(esai_priv->sp
On 11/24/15, Anshuman Khandual wrote:
> This adds two tests for memory page migration. One for normal page
> migration which works for both 4K or 64K base page size kernel and
> the other one is for 16MB huge page migration which will work both
> 4K or 64K base page sized 16MB huge pages as and wh
53 matches
Mail list logo
