On Tue, Nov 24, 2015 at 03:03:29PM +0800, Shengjiu Wang wrote:
> SPDIF need to enable the spba clock, when sdma is using share peripheral
> script. In this case, there is two spba master port is used, if don't
> enable the clock, the spba bus will have arbitration issue, which may
> cause read/write wrong data from/to SPDIF registers.
>
> Signed-off-by: Shengjiu Wang <shengjiu.w...@freescale.com>
> ---
> Documentation/devicetree/bindings/sound/fsl,spdif.txt | 5 +++++
For the binding:
Acked-by: Rob Herring <r...@kernel.org>
> sound/soc/fsl/fsl_spdif.c | 15 +++++++++++++++
> 2 files changed, 20 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> index b5ee32e..4ca39dd 100644
> --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> @@ -27,6 +27,11 @@ Required properties:
> Transceiver Clock Diagram" of SoC reference manual.
> It can also be referred to TxClk_Source bit of
> register SPDIF_STC.
> + "spba" The spba clock is required when SPDIF is placed as a
> + bus slave of the Shared Peripheral Bus and when two
> + or more bus masters (CPU, DMA or DSP) try to access
> + it. This property is optional depending on the SoC
> + design.
>
> - big-endian : If this property is absent, the native endian
> mode
> will be in use as default, or the big endian mode
> diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
> index 28a8823..64e2a1f 100644
> --- a/sound/soc/fsl/fsl_spdif.c
> +++ b/sound/soc/fsl/fsl_spdif.c
> @@ -88,6 +88,7 @@ struct spdif_mixer_control {
> * @rxclk: rx clock sources for capture
> * @coreclk: core clock for register access via DMA
> * @sysclk: system clock for rx clock rate measurement
> + * @spbaclk: SPBA clock (optional, depending on SoC design)
> * @dma_params_tx: DMA parameters for transmit channel
> * @dma_params_rx: DMA parameters for receive channel
> */
> @@ -106,6 +107,7 @@ struct fsl_spdif_priv {
> struct clk *rxclk;
> struct clk *coreclk;
> struct clk *sysclk;
> + struct clk *spbaclk;
> struct snd_dmaengine_dai_dma_data dma_params_tx;
> struct snd_dmaengine_dai_dma_data dma_params_rx;
> /* regcache for SRPC */
> @@ -474,6 +476,12 @@ static int fsl_spdif_startup(struct snd_pcm_substream
> *substream,
> return ret;
> }
>
> + ret = clk_prepare_enable(spdif_priv->spbaclk);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to enable spba clock\n");
> + goto err_spbaclk;
> + }
> +
> ret = spdif_softreset(spdif_priv);
> if (ret) {
> dev_err(&pdev->dev, "failed to soft reset\n");
> @@ -515,6 +523,8 @@ disable_txclk:
> for (i--; i >= 0; i--)
> clk_disable_unprepare(spdif_priv->txclk[i]);
> err:
> + clk_disable_unprepare(spdif_priv->spbaclk);
> +err_spbaclk:
> clk_disable_unprepare(spdif_priv->coreclk);
>
> return ret;
> @@ -548,6 +558,7 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream
> *substream,
> spdif_intr_status_clear(spdif_priv);
> regmap_update_bits(regmap, REG_SPDIF_SCR,
> SCR_LOW_POWER, SCR_LOW_POWER);
> + clk_disable_unprepare(spdif_priv->spbaclk);
> clk_disable_unprepare(spdif_priv->coreclk);
> }
> }
> @@ -1261,6 +1272,10 @@ static int fsl_spdif_probe(struct platform_device
> *pdev)
> return PTR_ERR(spdif_priv->coreclk);
> }
>
> + spdif_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
> + if (IS_ERR(spdif_priv->spbaclk))
> + dev_warn(&pdev->dev, "no spba clock in devicetree\n");
> +
> /* Select clock source for rx/tx clock */
> spdif_priv->rxclk = devm_clk_get(&pdev->dev, "rxtx1");
> if (IS_ERR(spdif_priv->rxclk)) {
> --
> 1.9.1
>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
