i fsl-ehci.0: can't setup
fsl-ehci fsl-ehci.0: USB bus 1 deregistered
fsl-ehci fsl-ehci.0: init fsl-ehci.0 fail, -22
fsl-ehci: probe of fsl-ehci.0 failed with error -22
Fix it by returning appropriate version info for mpc5121, too.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/host/
tup+0x220/0x284
...
Fix it by checking 'have_sysif_regs' flag before register access.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/host/ehci-fsl.c |9 +
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl
. Fix it.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/otg/Kconfig |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 6223062..37962c9 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -110,7
Hi Greg,
On Tue, 4 Dec 2012 14:23:21 +0100
Anatolij Gustschin wrote:
> fsl-ehci probing fails on mpc5121e:
> ...
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
> fsl-ehci fsl-ehci.0: new USB
Hi Greg,
On Tue, 4 Dec 2012 10:22:06 -0500 (EST)
Alan Stern wrote:
> On Tue, 4 Dec 2012, Anatolij Gustschin wrote:
>
> > mpc5121e doesn't have system interface registers, accessing this
> > register address space cause the machine check exception
uot;otg_fsm.h" resulting
in another build breakage:
...
In file included from drivers/usb/phy/phy-fsl-usb.c:46:0:
drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or
directory
compilation terminated.
make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1
F
Hello Florian,
On Tue, 26 Mar 2013 19:06:14 +0100
Florian Fainelli wrote:
...
> diff --git a/arch/powerpc/platforms/52xx/Kconfig
> b/arch/powerpc/platforms/52xx/Kconfig
> index 90f4496..65232cb 100644
> --- a/arch/powerpc/platforms/52xx/Kconfig
> +++ b/arch/powerpc/platforms/52xx/Kconfig
> @@ -3
On Tue, 9 Apr 2013 09:31:18 -0700
Sarah Sharp wrote:
> It sounds like u-boot already has basic xHCI support, and you should
> contact the u-boot developers for further support of interrupt
> transfers.
>
> http://lists.denx.de/mailman/listinfo/u-boot
This is the correct U-Boot list, yes.
> or
On Fri, 24 May 2013 14:42:46 +
"Thumshirn, Johannes Tobias" wrote:
> Hi list,
>
> I'm experiencing problems while booting on a Freescale P1013 based board. It
> hangs on USB initialization:
> [3.763584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [3.770519] ehci-pci
On Sat, 30 Nov 2013 23:51:31 +0100
Gerhard Sittig wrote:
> after device tree based clock lookup became available, the peripheral
> driver need no longer construct clock names which include the component
> index -- remove the "usb%d_clk" template, always use "ipg" instead
>
> Cc: Greg Kroah-Hartm
Hi,
I have to rework drivers for custom FT232H based FPGA configuration
adapters to make them suitable for including in mainline kernel. These
adapters should be usable via low-level drivers for FPGA Manager
framework. Two required low-level FPGA Manager drivers (for PS-SPI and
CvP configurations)
On Thu, 7 Dec 2017 14:24:57 -0600
Alan Tull at...@kernel.org wrote:
...
>> Instead of MFD part as in previous version I intend to add an USB misc
>> driver for our FPGA configuration adapters under drivers/usb/misc.
>> When probing for VID/PID assigned to FIFO-FPP adapter type, this
>> driver will
Hi Geert,
On Fri, 8 Dec 2017 10:27:46 +0100
Geert Uytterhoeven ge...@linux-m68k.org wrote:
[...]
>A quick Google shows the FT232H chip in MPSSE mode can also support i2c.
>I guess your design can be extended for that, too, using another VID/PID
>pair?
Yes, this should be doable.
Thanks,
Anatol
driver for Altera FPP FPGA configuration
via FT232H FT245-FIFO interface.
Anatolij Gustschin (3):
mfd: Add support for FTDI FT232H devices
gpio: Add FT232H CBUS GPIO driver
fpga manager: Add FT232H driver for Altera FPP
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile
Add driver for CBUS pins on FT232H. The driver supports setting
GPIO direction and getting/setting CBUS 0-3 pin value. The CBUS
pins have to be enabled by configuring I/O mode in the FTDI EEPROM.
Signed-off-by: Anatolij Gustschin
---
drivers/gpio/Kconfig | 11 ++
drivers/gpio/Makefile
Add FPGA manager driver for loading Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile| 1 +
drivers/fpga/ftdi-fifo-fpp.c | 569
Add USB part with common functions for USB-GPIO/I2C/SPI master
adapters. These allow communication with chip's control, transmit
and receive endpoints and will be used by various FT232H drivers.
Signed-off-by: Anatolij Gustschin
---
drivers/mfd/Kconfig | 9 +
drivers/mfd/Mak
On Fri, 07 Jul 2017 09:48:48 +0200
Bjørn Mork bj...@mork.no wrote:
>[adding Johan on the CC list]
>
>Anatolij Gustschin writes:
>
>> +static struct usb_device_id ftdi_mfd_table[] = {
>> +{ USB_DEVICE(0x0403, 0x6014) },
>> +{}
>> +};
>> +MODULE_DE
On Mon, 10 Jul 2017 14:34:27 +0200
Johan Hovold jo...@kernel.org wrote:
>On Fri, Jul 07, 2017 at 11:53:29AM +0200, Anatolij Gustschin wrote:
>> On Fri, 07 Jul 2017 09:48:48 +0200
>> Bjørn Mork bj...@mork.no wrote:
>>
>> >[adding Johan on the CC list]
>&
.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/serial/ftdi_sio.c | 62 ++-
drivers/usb/serial/ftdi_sio.h | 12 +
2 files changed, 73 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index
On Wed, 12 Jul 2017 10:50:03 +0200
Johan Hovold jo...@kernel.org wrote:
...
>IIRC we should be able read from the EEPROM, and I would at least expect
>there to be a way to retrieve the current mode as well.
I've just send a patch for ftdi_sio.
Thanks,
Anatolij
--
To unsubscribe from this list: s
On Wed, 19 Jul 2017 11:03:11 +0200
Johan Hovold jo...@kernel.org wrote:
>On Thu, Jul 13, 2017 at 06:25:25PM +0200, Anatolij Gustschin wrote:
>> On FT232H the interface mode can be configured in the EEPROM,
>> and the async UART mode is configured by default. The chip is
>> al
On Mon, 10 Jul 2017 14:52:10 +0200
Johan Hovold jo...@kernel.org wrote:
>On Thu, Jul 06, 2017 at 10:49:16PM +0200, Anatolij Gustschin wrote:
>> Add USB part with common functions for USB-GPIO/I2C/SPI master
>> adapters. These allow communication with chip's control, tra
On Wed, 19 Jul 2017 10:59:34 +0200
Johan Hovold jo...@kernel.org wrote:
...
>> > +static const struct mfd_cell ftdi_cells[] = {
>> > + { .name = "ftdi-cbus-gpio", },
>> > + { .name = "ftdi-mpsse-i2c", },
>> > + { .name = "ftdi-mpsse-spi", },
>> > + { .name = "ftdi-fifo-fpp-mgr", },
>> > +};
>
On Wed, 12 Jul 2017 11:11:46 +0200
Bjørn Mork bj...@mork.no wrote:
>Johan Hovold writes:
>> On Tue, Jul 11, 2017 at 08:52:37AM +0200, Anatolij Gustschin wrote:
>>
>>> For devices with connected EEPROM some modes (including UART) are
>>> configurable in the E
On Wed, 19 Jul 2017 13:39:36 +
David Laight david.lai...@aculab.com wrote:
>From: Anatolij Gustschin
>> Sent: 19 July 2017 14:30
>...
>> >Stupid question, I know, but I cannot help thinking: If you have an
>> >EEPROM then why the h... don't you use an
On Tue, 25 Jul 2017 13:52:35 +0200
Johan Hovold jo...@kernel.org wrote:
>On Wed, Jul 19, 2017 at 02:59:00PM +0200, Anatolij Gustschin wrote:
>> On Wed, 19 Jul 2017 10:59:34 +0200
>> Johan Hovold jo...@kernel.org wrote:
>
>> >> And as David Laight already point
On Tue, 25 Jul 2017 13:49:08 +0200
Johan Hovold jo...@kernel.org wrote:
>On Wed, Jul 19, 2017 at 01:58:30PM +0200, Anatolij Gustschin wrote:
>> On Mon, 10 Jul 2017 14:52:10 +0200
>> Johan Hovold jo...@kernel.org wrote:
>>
>> >On Thu, Jul 06, 2017 at 10:49:16PM +
ARRI FPP adapters for
FPGA configuration via Altera fast passive parallel interface.
Anatolij Gustschin (3):
usb: misc: add driver for FT232H based FPGA configuration devices
spi: add FTDI MPSSE SPI controller driver
fpga: Add fpga manager driver for ARRI Altera FPP
drivers/fpga/Kconfig
: Anatolij Gustschin
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c | 671 +++
3 files changed, 679 insertions(+)
create mode 100644 drivers/spi/spi-ftdi-mpsse.c
diff --git a/drivers/spi/Kconfig b/drivers
will add an FPP FPGA manager driver for it.
The FTDI protocol code and prototypes was borrowed from libftdi.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/misc/Kconfig|9 +
drivers/usb/misc/Makefile |1 +
drivers/usb/misc/ft232h-intf.c | 1468
Add FPGA manager driver for loading ARRI Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile| 1 +
drivers/fpga/ftdi-fifo-fpp.c | 594
Hi Alan,
On Mon, 5 Nov 2018 12:52:03 -0600
Alan Tull at...@kernel.org wrote:
>On Mon, Nov 5, 2018 at 10:19 AM Anatolij Gustschin wrote:
>
>Hi Anatolij,
>
>>
>> This series adds drivers and FPGA manager support required
>> for FT232H based ARRI FPGA configuration a
On Tue, 6 Nov 2018 13:07:13 +0800
kbuild test robot l...@intel.com wrote:
...
>from drivers/spi/spi-ftdi-mpsse.c:11:
>>> arch/x86/include/uapi/asm/ptrace-abi.h:20:13: error: expected identifier
>>> before numeric constant
>#define CS 13
>^
>>> drivers/spi
: Anatolij Gustschin
---
Changes in v2:
- fix build breakage when building with ARCH=i386 allmodconfig
- add checks for ops->lock/ops->unlock presence in pdata
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c
On Fri, 9 Nov 2018 15:30:26 +
Mark Brown broo...@kernel.org wrote:
>On Fri, Nov 09, 2018 at 08:53:56AM +0100, Anatolij Gustschin wrote:
>> Add SPI bus controller driver for FTDI MPSSE mode. This driver
>> is supposed to be used together with the FT232H interface dri
On Tue, 13 Nov 2018 10:11:32 -0800
Mark Brown broo...@kernel.org wrote:
>Please don't do this, the numbering for a patch series only makes sense
>for ordering the patches within a series. If you're just sending a
>single patch then there's no need to number anything, or the patch
>series hasn't b
l attempt didn't include USB SPI bus support for PS-
SPI FPGA configuration via USB)
- rework FPP fpga manager driver based on new FT232H interface
driver and extend it according to CPLD changes for additional
support of new hardware revision B.
Anatolij Gustschin (3):
us
Add FPGA manager driver for loading ARRI Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
.../ABI/testing/sysfs-driver-ftdi-fifo-fpp| 7 +
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile
will add an FPP FPGA manager driver for it.
The FTDI protocol code and prototypes was borrowed from libftdi.
Signed-off-by: Anatolij Gustschin
---
MAINTAINERS |8 +
drivers/usb/misc/Kconfig|9 +
drivers/usb/misc/Makefile |1 +
drivers/usb/misc/ft232h
: Anatolij Gustschin
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c | 673 +++
3 files changed, 681 insertions(+)
create mode 100644 drivers/spi/spi-ftdi-mpsse.c
diff --git a/drivers/spi/Kconfig b/drivers
On Tue, 20 Nov 2018 00:56:13 +
Trent Piepho tpie...@impinj.com wrote:
>On Tue, 2018-11-20 at 01:28 +0100, Anatolij Gustschin wrote:
>> Add USB interface driver for ARRI FPGA configuration devices based on
>> FTDI FT232H chip. Depending on USB PID the driver registers differ
On Fri, 23 Nov 2018 16:10:54 +0100
Greg KH gre...@linuxfoundation.org wrote:
...
>> Fixes: 0772a5bf580c ("usb: misc: add driver for FT232H based FPGA
>> configuration devices")
>
>I can't find this commit anywhere, nor the file that this patch touches.
>
>What tree is it in?
This new driver was
On Wed, 21 Nov 2018 12:42:37 +
Mark Brown broo...@kernel.org wrote:
...
>> obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o
>> +obj-$(CONFIG_SPI_FTDI_MPSSE)+= spi-ftdi-mpsse.o
>>
>> # SPI slave protocol handlers
>> obj-$(CONFIG_SPI_SLAVE_TIME)
ew FT232H interface
driver and extend it according to CPLD changes for additional
support of new hardware revision B.
Anatolij Gustschin (3):
usb: misc: add driver for FT232H based FPGA configuration devices
spi: add FTDI MPSSE SPI controller driver
fpga: Add fpga manager driver for ARRI Altera
will add an FPP FPGA manager driver for it.
The FTDI protocol code and prototypes was borrowed from libftdi.
Signed-off-by: Anatolij Gustschin
---
MAINTAINERS |8 +
drivers/usb/misc/Kconfig|9 +
drivers/usb/misc/Makefile |1 +
drivers/usb/misc/ft232h
Add FPGA manager driver for loading ARRI Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
.../ABI/testing/sysfs-driver-ftdi-fifo-fpp| 7 +
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile
: Anatolij Gustschin
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c | 651 +++
3 files changed, 659 insertions(+)
create mode 100644 drivers/spi/spi-ftdi-mpsse.c
diff --git a/drivers/spi/Kconfig b/drivers
Hi Alan,
On Tue, 27 Nov 2018 18:54:38 +0100
Anatolij Gustschin ag...@denx.de wrote:
>Add FPGA manager driver for loading ARRI Altera FPGAs via fast
>passive parallel (FPP) interface using FTDI FT232H chip.
Ping. Is this patch okay? I suppose that it will go via usb tree
as part of the
Hi Mark,
On Tue, 27 Nov 2018 18:54:37 +0100
Anatolij Gustschin ag...@denx.de wrote:
>Add SPI bus controller driver for FTDI MPSSE mode. This driver
>is supposed to be used together with the FT232H interface driver
>for FPGA configuration in drivers/usb/misc/ft232h-intf.c which
>adds
Hi,
On Wed, 5 Dec 2018 22:10:40 +0800
Song Qiang songqiang1304...@gmail.com wrote:
...
>I've been developing some iio device drivers and found that some people
>would like to test their devices with a qemu system which requires an
>i2c or spi port on our development hosts. Usually this is achieved
ew FT232H interface
driver and extend it according to CPLD changes for additional
support of new hardware revision B.
Anatolij Gustschin (3):
usb: misc: add driver for FT232H based FPGA configuration devices
spi: add FTDI MPSSE SPI controller driver
fpga: Add fpga manager driver
: Anatolij Gustschin
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c | 651 +++
3 files changed, 659 insertions(+)
create mode 100644 drivers/spi/spi-ftdi-mpsse.c
diff --git a/drivers/spi/Kconfig b/drivers
Add FPGA manager driver for loading ARRI Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
.../ABI/testing/sysfs-driver-ftdi-fifo-fpp| 7 +
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile
will add an FPP FPGA manager driver for it.
The FTDI protocol code and prototypes was borrowed from libftdi.
Signed-off-by: Anatolij Gustschin
---
MAINTAINERS |8 +
drivers/usb/misc/Kconfig| 10 +
drivers/usb/misc/Makefile |1 +
drivers/usb/misc/ft232h
55 matches
Mail list logo
