mpc5121e doesn't have system interface registers, accessing this
register address space cause the machine check exception and a
kernel crash:

...
Machine check in kernel mode.
Caused by (from SRR1=49030): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
MPC5121 ADS
Modules linked in:
NIP: c025fd60 LR: c0265bb4 CTR: 00000000
REGS: df82dac0 TRAP: 0200   Not tainted
(3.7.0-rc7-00641-g81e6c91)
MSR: 00049030 <EE,ME,IR,DR>  CR: 42002024  XER: 20000000
TASK = df824b70[1] 'swapper' THREAD: df82c000
GPR00: 00000000 df82db70 df824b70 df3ed0f0 00000003 00000000 00000000 00000000
GPR08: 00000020 32000000 c03550ec 20000000 22002028 00000000 c0003f5c 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0423898 c0450000
GPR24: 00000077 00000002 e5086180 1c000c00 e5086000 df33ec00 00000003 df34e000
NIP [c025fd60] ehci_fsl_setup_phy+0xd0/0x354
LR [c0265bb4] ehci_fsl_setup+0x220/0x284
...

Fix it by checking 'have_sysif_regs' flag before register access.

Signed-off-by: Anatolij Gustschin <ag...@denx.de>
---
 drivers/usb/host/ehci-fsl.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 0d2f35c..16ed5d6 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -230,7 +230,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 
        switch (phy_mode) {
        case FSL_USB2_PHY_ULPI:
-               if (pdata->controller_ver) {
+               if (pdata->have_sysif_regs && pdata->controller_ver) {
                        /* controller version 1.6 or above */
                        setbits32(non_ehci + FSL_SOC_USB_CTRL,
                                        ULPI_PHY_CLK_SEL);
@@ -251,7 +251,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
                portsc |= PORT_PTS_PTW;
                /* fall through */
        case FSL_USB2_PHY_UTMI:
-               if (pdata->controller_ver) {
+               if (pdata->have_sysif_regs && pdata->controller_ver) {
                        /* controller version 1.6 or above */
                        setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
                        mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
@@ -267,7 +267,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
                break;
        }
 
-       if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) {
+       if (pdata->have_sysif_regs && pdata->controller_ver &&
+           (phy_mode == FSL_USB2_PHY_ULPI)) {
                /* check PHY_CLK_VALID to get phy clk valid */
                if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
                                PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
@@ -278,7 +279,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 
        ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
 
-       if (phy_mode != FSL_USB2_PHY_ULPI)
+       if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
                setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
 
        return 0;
-- 
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to