Hi Tony,
On Wednesday 07 March 2018 08:26 PM, Tony Lindgren wrote:
> Let's add support for the GPIO controlled USB PHY on the MDM6600 modem.
> It is used on some Motorola Mapphone series of phones and tablets such
> as Droid 4.
>
> The MDM6600 is hardwired to the first OHCI port in the Droid 4 ca
Hi Greg,
here's my second pull request for this -rc cycle. Things seem to be
calming down rather early this time around.
Let me know if you want anything to be changed.
cheers
The following changes since commit 4a3928c6f8a53fa1aed28ccba227742486e8ddcb:
Linux 4.16-rc3 (2018-02-25 18:50:41 -0
Hi,
Martin Blumenstingl writes:
>>> Martin Blumenstingl (3):
>>> dt-bindings: usb: add support for dwc3 controller on Amlogic Meson GX
>>> usb: dwc3: of-simple: add support for shared and pulsed reset lines
>>> usb: dwc3: of-simple: add support for the Amlogic Meson GXL and AXG
>>> SoC
On Tue, Mar 06, 2018 at 04:59:10PM +0800, Ran Wang wrote:
> Property "snps,incr-burst-type-adjustment = , ..." for USB3.0 DWC3.
> When only one value means INCRx mode with fix burst type.
> When more than one value, means undefined length burst mode, USB controller
> can use the length less than or
Am Mittwoch, den 07.03.2018, 13:41 -0800 schrieb sathyanarayanan
kuppuswamy :
>
> On 03/07/2018 12:58 PM, Greg KH wrote:
> > So I don't see why your check is needed, what other code path would ever
> > call this function in a way that the bounds check would be needed?
> void usb_serial_gene
This fixes an oops on unbind / module unload. The fix is similar to the
one in this commit: 0c3aae9bd59978fb8c3557d7883380bef0f2cfa1 (USB: musb:
fix late external abort on suspend), which only fixes the issue for
musb_suspend.
musb_remove function now also flushes any work and also calls
musb_plat
On 03/06/2018 09:09 AM, Minas Harutyunyan wrote:
> Hi,
>
> On 3/6/2018 10:45 AM, Minas Harutyunyan wrote:
>> Hi,
>>
>> On 3/5/2018 11:14 PM, Marek Vasut wrote:
>>> On 02/20/2018 06:51 AM, Minas Harutyunyan wrote:
>>> [...]
>>> Is there a way to reduce that or is that the absolute minimum in HS
On 2018-02-27 14:39:34 [-0300], Mauro Carvalho Chehab wrote:
> Hi Sebastian,
Hi Mauro,
> Sorry for taking some time to test it, has been busy those days...
:)
> Anyway, I tested it today. Didn't work. It keep losing data.
Okay, this was unexpected. What I learned from the thread is that you
use
Roger Quadros writes:
> This is useful on platforms (e.g. TI AM437x) that don't
> have ID available on a GPIO but do have the OTG block.
>
> We can obtain the ID state via the OTG block and use it
> for dual-role switching.
>
> Signed-off-by: Roger Quadros
patch one applied fine to testing/next
Hi Roger,
William Wu writes:
> The dwc3_core_init() gets the PHYs and initializes the PHYs with
> the usb_phy_init() and phy_init() functions before initializing
> core, and power on the PHYs after core initialization is done.
>
> However, some platforms (e.g. Rockchip RK3399 DWC3 with Type-C
>
Remove the duplicated code for asix88179_178a bind and reset methods.
Signed-off-by: Alexander Kurz
---
drivers/net/usb/ax88179_178a.c | 117 +++--
1 file changed, 31 insertions(+), 86 deletions(-)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb
The permanent address of asix88179_178a devices is read at probe time
and should not be overwritten later. Otherwise it may be overwritten
unintentionally with a configured address.
Signed-off-by: Alexander Kurz
---
drivers/net/usb/ax88179_178a.c | 1 -
1 file changed, 1 deletion(-)
diff --git
Felipe,
On 08/03/18 12:39, Felipe Balbi wrote:
> Roger Quadros writes:
>
>> This is useful on platforms (e.g. TI AM437x) that don't
>> have ID available on a GPIO but do have the OTG block.
>>
>> We can obtain the ID state via the OTG block and use it
>> for dual-role switching.
>>
>> Signed-off
On 03/06/2018 09:58 PM, Shuah Khan wrote:
On 03/06/2018 01:35 AM, Salvador Fandiño wrote:
On 03/06/2018 01:03 AM, Shuah Khan wrote:
On 03/05/2018 02:00 AM, Salvador Fandiño wrote:
On 02/21/2018 01:35 AM, Shuah Khan wrote:
Hi Salvador,
On 01/30/2018 01:36 AM, Salvador Fandino wrote:
Let me
On 07.03.2018 08:09, Kai Heng Feng wrote:
Hi Matthias,
Do you have any concern about this patch?
Adding patch and sending forward
Thanks
-Mathias
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info
Hi,
Roger Quadros writes:
> Felipe,
>
> On 08/03/18 12:39, Felipe Balbi wrote:
>> Roger Quadros writes:
>>
>>> This is useful on platforms (e.g. TI AM437x) that don't
>>> have ID available on a GPIO but do have the OTG block.
>>>
>>> We can obtain the ID state via the OTG block and use it
>>>
On Wed, Mar 07, 2018 at 01:41:51PM -0800, sathyanarayanan kuppuswamy wrote:
>
>
> On 03/07/2018 12:58 PM, Greg KH wrote:
> > On Wed, Mar 07, 2018 at 12:23:56PM -0800,
> > sathyanarayanan.kuppusw...@linux.intel.com wrote:
> > > From: Kuppuswamy Sathyanarayanan
> > >
> > >
> > > In usb_serial_g
Hi Greg
A few more xhci fixes for usb-linus, fixing tracing output, a lock error in xhci
debug capability and a few platform specific fixes
-Mathias
Kai-Heng Feng (1):
xhci: Fix front USB ports on ASUS PRIME B350M-A
Lu Baolu (1):
usb: xhci: dbc: Fix lockdep warning
Mathias Nyman (1):
xhc
Fix incorrent values showed for max Primary stream and
Linear stream array (LSA) values in the endpoint context
decoder.
Fixes: 19a7d0d65c4a ("usb: host: xhci: add Slot and EP Context tracers")
Cc: # v4.12+
Signed-off-by: Mathias Nyman
---
drivers/usb/host/xhci.h | 22 --
1
From: Lu Baolu
The xHCI DbC implementation might enter a deadlock situation because
there is no sufficient protection against the shared data between
process and softirq contexts. This can lead to the following lockdep
warnings. This patch changes to use spin_{,un}lock_irq{save,restore}
to avoid
From: Yoshihiro Shimoda
This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat:
enable clk in resume timing") because this driver also has runtime PM
and the commit 560869100b99 ("clk: renesas: cpg-mssr: Restore module
clocks during resume") will restore the clock on R-Car H3 environme
From: Kai-Heng Feng
When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the
xHC stops working:
[ 549.114587] xhci_hcd :02:00.0: WARN: xHC CMD_RUN timeout
[ 549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110
[ 549.114638] xhci_hcd :02:00.0: can't suspen
On Thu, Mar 08, 2018 at 10:43:32AM +0200, Felipe Balbi wrote:
>
> Hi Greg,
>
> here's my second pull request for this -rc cycle. Things seem to be
> calming down rather early this time around.
>
> Let me know if you want anything to be changed.
>
> cheers
>
> The following changes since commit
* Kishon Vijay Abraham I [180308 08:23]:
> On Wednesday 07 March 2018 08:26 PM, Tony Lindgren wrote:
> > +config PHY_MAPPHONE_MDM6600
> > + tristate "Motorola Mapphone MDM6600 modem USB PHY driver"
> > + depends on OF && USB_SUPPORT
> > + select GENERIC_PHY
> > + select USB_PHY
>
> given
Hi,
On Thu, Mar 08, 2018 at 10:31:21AM +0100, Merlijn Wajer wrote:
> This fixes an oops on unbind / module unload. The fix is similar to the
> one in this commit: 0c3aae9bd59978fb8c3557d7883380bef0f2cfa1 (USB: musb:
> fix late external abort on suspend), which only fixes the issue for
> musb_suspe
Hi,
On Thu, Mar 08, 2018 at 12:43:40PM +0200, Felipe Balbi wrote:
> William Wu writes:
> > The dwc3_core_init() gets the PHYs and initializes the PHYs with
> > the usb_phy_init() and phy_init() functions before initializing
> > core, and power on the PHYs after core initialization is done.
> >
>
On Thu, Mar 08, 2018 at 05:17:16PM +0200, Mathias Nyman wrote:
> From: Yoshihiro Shimoda
>
> This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat:
> enable clk in resume timing") because this driver also has runtime PM
> and the commit 560869100b99 ("clk: renesas: cpg-mssr: Restore m
On Thu, Mar 08, 2018 at 05:17:17PM +0200, Mathias Nyman wrote:
> From: Kai-Heng Feng
>
> When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the
> xHC stops working:
> [ 549.114587] xhci_hcd :02:00.0: WARN: xHC CMD_RUN timeout
> [ 549.114608] suspend_common(): xhci_pci_suspe
> Stefan Wahren hat am 12. Februar 2018 um 21:20
> geschrieben:
>
>
> We better print an error in case probing of dwc2 fails on
> setting the DMA coherent mask.
>
> Signed-off-by: Stefan Wahren
> ---
> drivers/usb/dwc2/platform.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Hi,
On 08/03/18 17:46, Bin Liu wrote:
> No need to flush, the work is already cancelled at this point.
>
>> +
>> musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
>> +musb_platform_exit(musb);
>
> This can be move down to out side of holding the spinlock,
>
>> spin_unlock_irqrestore(&mu
On Tue, Mar 06, 2018 at 09:32:43AM +0100, Johan Hovold wrote:
> Add device id for ELDAT Easywave RX09 tranceiver.
>
> Reported-by: Jan Jansen
> Cc: stable
> Signed-off-by: Johan Hovold
Reviewed-by: Greg Kroah-Hartman
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
t
On Thu, Mar 08, 2018 at 07:00:16PM +0100, Merlijn Wajer wrote:
> Hi,
>
> On 08/03/18 17:46, Bin Liu wrote:
>
>
> > No need to flush, the work is already cancelled at this point.
> >
> >> +
> >>musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
> >> + musb_platform_exit(musb);
> >
> > This can be m
This fixes an oops on unbind / module unload.
musb_remove function now calls musb_platform_exit before disabling
runtime pm.
Signed-off-by: Merlijn Wajer
---
drivers/usb/musb/musb_core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/driv
Hi,
please add patch version numbers in the subject when necessary. This
helps cross-referencing.
On Thu, Mar 08, 2018 at 09:40:47PM +0100, Merlijn Wajer wrote:
> This fixes an oops on unbind / module unload.
>
> musb_remove function now calls musb_platform_exit before disabling
> runtime pm.
>
On Thu, Mar 08, 2018 at 09:40:47PM +0100, Merlijn Wajer wrote:
> This fixes an oops on unbind / module unload.
Please also mention here that it happens on omap2430 platform.
(omap2430 is the only platform affected by this bug.)
Regards,
-Bin.
--
To unsubscribe from this list: send the line "unsu
On 01/03/18 14:18, Mathias Nyman wrote:
> On 14.02.2018 18:34, Jon Hunter wrote:
>> Add runtime PM support to the Tegra XHCI driver and move the function
>> calls to enable/disable the clocks, regulators and PHY into the runtime
>> PM callbacks.
>>
>> Signed-off-by: Jon Hunter
>> ---
>> drivers
Hi,
On 08/03/18 22:15, Bin Liu wrote:
> please add patch version numbers in the subject when necessary. This
> helps cross-referencing.
Will do. I naively assumed that the first patch would implicitly be
number 1. Will send out v2 now.
>>
>> +musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
>
>
This fixes an oops on unbind / module unload (on the musb omap2430
platform).
musb_remove function now calls musb_platform_exit before disabling
runtime pm.
Signed-off-by: Merlijn Wajer
---
drivers/usb/musb/musb_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/
On 03/08/2018 12:54 AM, Oliver Neukum wrote:
Am Mittwoch, den 07.03.2018, 13:41 -0800 schrieb sathyanarayanan
kuppuswamy :
On 03/07/2018 12:58 PM, Greg KH wrote:
So I don't see why your check is needed, what other code path would ever
call this function in a way that the bounds check wo
On Thu, Mar 08, 2018 at 03:29:48PM -0800, sathyanarayanan kuppuswamy wrote:
>
>
> On 03/08/2018 12:54 AM, Oliver Neukum wrote:
> > Am Mittwoch, den 07.03.2018, 13:41 -0800 schrieb sathyanarayanan
> > kuppuswamy :
> > > On 03/07/2018 12:58 PM, Greg KH wrote:
> > > > So I don't see why your c
On 03/08/2018 03:43 PM, Greg KH wrote:
On Thu, Mar 08, 2018 at 03:29:48PM -0800, sathyanarayanan kuppuswamy wrote:
On 03/08/2018 12:54 AM, Oliver Neukum wrote:
Am Mittwoch, den 07.03.2018, 13:41 -0800 schrieb sathyanarayanan
kuppuswamy :
On 03/07/2018 12:58 PM, Greg KH wrote:
So I do
Hi Greg,
> From: Greg KH, Sent: Friday, March 9, 2018 2:06 AM
>
> On Thu, Mar 08, 2018 at 05:17:16PM +0200, Mathias Nyman wrote:
> > From: Yoshihiro Shimoda
> >
> > This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat:
> > enable clk in resume timing") because this driver also has r
Let's add support for the GPIO controlled USB PHY on the MDM6600 modem.
It is used on some Motorola Mapphone series of phones and tablets such
as Droid 4.
The MDM6600 is hardwired to the first OHCI port in the Droid 4 case, and
is controlled by several GPIOs. The USB PHY is integrated into the MDM
Hi,
On Mar 9, 2018, at 1:06 AM, Greg KH wrote:
On Thu, Mar 08, 2018 at 05:17:17PM +0200, Mathias Nyman wrote:
From: Kai-Heng Feng
When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the
xHC stops working:
[ 549.114587] xhci_hcd :02:00.0: WARN: xHC CMD_RUN timeout
[ 549
Signed-off-by: Tobin C. Harding
---
drivers/usb/misc/usbtest.c | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 90028ef541e3..9e1142b8b91b 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
On Fri, Mar 09, 2018 at 04:55:35PM +1100, Tobin C. Harding wrote:
> Signed-off-by: Tobin C. Harding
> ---
Please drop this. To much on github not writing proper commit logs :(
v2 to come.
thanks,
Tobin.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a me
The kernel would like to have all stack VLA usage removed[1]. We
already have a pre-processor constant defined MAX_SGLEN. We can use
this instead of the variable param-sglen.
[1]: https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Tobin C. Harding
---
drivers/usb/misc/usbtest.c | 5 -
1 fi
This change fixes buffer overflows and silent data corruption with the
usbmon device driver text file read operations.
Signed-off-by: Fredrik Noring
Signed-off-by: Pete Zaitcev
---
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index f5e1bb5e5217..984f7e12a6a5 100644
--- a
On Thu, Mar 08, 2018 at 01:41:23AM +, Jun Li wrote:
> > If you are asking my opinion, the data role must be handled as separate
> > capability of the port, i.e. you probable want to have separate properties
> > for
> > the power role and data role, even if we did not support that yet in the
>
49 matches
Mail list logo
