On Thursday, October 10, 2013 3:49 PM, Sachin Kamat wrote:
> On 10 October 2013 12:01, Jingoo Han wrote:
> > The non-DT for EXYNOS SoCs is not supported from v3.11.
> > Thus, there is no need to support non-DT for Exynos EHCI driver.
> >
> > The 'include/linux/platform_data/usb-ehci-exynos.h' file
This patchset removes non-DT support for Exynos EHCI and OHCI
from arch and driver directories, because the non-DT for EXYNOS SoCs
is not supported from v3.11. Also, missing usb_put_hcd() is added to
prevent memory leak.
In order to keep the consistency, ehci-s5p.c is changed to
ehci-exynos.c. So,
Since commit ca91435 "ARM: EXYNOS: Remove unused board files",
s5p_device_ehci is not used anymore. Thus, s5p_device_ehci can
be removed. Also, unnecessary S5P_DEV_USB_EHCI option is removed.
Signed-off-by: Jingoo Han
Reviewed-by: Sylwester Nawrocki
---
arch/arm/plat-samsung/Kconfig
The non-DT for EXYNOS SoCs is not supported from v3.11.
Thus, there is no need to support non-DT for Exynos OHCI driver.
The 'include/linux/platform_data/usb-ohci-exynos.h' file has been
used for non-DT support. Thus, the 'usb-ohci-exynos.h' file can
be removed.
Signed-off-by: Jingoo Han
---
dr
At Wed, 9 Oct 2013 13:01:08 -0700,
Sarah Sharp wrote:
>
> On Thu, Sep 26, 2013 at 10:36:29AM +0200, Takashi Iwai wrote:
> > At Mon, 23 Sep 2013 16:41:07 -0700,
> > Sarah Sharp wrote:
> > >
> > > The snd-usb-audio driver no longer loads properly on 3.12-rc2 when I
> > > plug in my USB headset. It
The non-DT for EXYNOS SoCs is not supported from v3.11.
Thus, there is no need to support non-DT for Exynos EHCI driver.
The 'include/linux/platform_data/usb-ehci-s5p.h' file has been
used for non-DT support. Thus, the 'usb-ehci-s5p.h' file can
be removed.
Signed-off-by: Jingoo Han
---
drivers/
Currently, Samsung is using 'EXYNOS' as the name of Samsung SoCs.
Thus, ehci-exynos is preferred than ehci-s5p.
Signed-off-by: Jingoo Han
---
drivers/usb/host/Kconfig |5 +-
drivers/usb/host/Makefile |2 +-
drivers/usb/host/{ehci-s5p.c => ehci-e
When devm_usb_get_phy() fails, usb_put_hcd() should be called
to prevent memory leak.
Signed-off-by: Jingoo Han
---
drivers/usb/host/ohci-exynos.c |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 5c877bf..aa50e18 100644
> OK, so it didn't switch at all. Then we are back to usb_modeswitch
> failure (or more likely: missing config for this device).
>
> You could test switching it manually:
>
> echo 2 > /sys/bus/usb/devices/1-2/bConfigurationValue
This was the point!
[ 4007.213187] usb 1-2: new high-speed US
On Wed, Oct 09, 2013 at 09:54:54PM +0200, Andrew Lunn wrote:
> On Wed, Oct 09, 2013 at 07:27:42PM +0200, Johan Hovold wrote:
> > This should probably remain a device-specific parameter. We already have
> > the MOXA mxser-driver with similar configuration options. This one uses
> > a custom ioctl t
On 10/09/2013 06:15 PM, Tony Lindgren wrote:
> * Roger Quadros [131009 00:19]:
>> Hi Tony,
>>
>> On 10/08/2013 01:06 PM, Roger Quadros wrote:
>>> This reverts commit 741532c4a995be11815cb72d4d7a48f442a22fea.
>>>
>>> The proper clock reference is provided in device tree so we
>>> no longer need thi
Hi Samuel,
Could you please pick this one for 3.13 if OK? Thanks.
cheers,
-roger
On 10/08/2013 01:06 PM, Roger Quadros wrote:
> This should fix the following warning at boot on OMAP5 uEVM
> [8.783155] WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883
> __clk_enable+0x94/0xa4()
>
> CC: Samuel
Thomas Schäfer writes:
> hpmini:~ # sudo mbimcli -d /dev/cdc-wdm0 --basic-connect-query-device-services
> [/dev/cdc-wdm0] Device services retrieved:
> Max DSS sessions: '5'
OK...
> Max DSS instances: 0
but no services support DSS. This is exactly like the E367. Seems
On Thursday 12 September 2013 03:57 PM, Vivek Gautam wrote:
> On Thu, Sep 12, 2013 at 3:40 PM, Kishon Vijay Abraham I wrote:
>> On Thursday 12 September 2013 02:57 PM, Vivek Gautam wrote:
>>> Hi Kishon,
>>>
>>>
>>> On Mon, Sep 2, 2013 at 9:13 PM, Kishon Vijay Abraham I
>>> wrote:
Adapted dw
Ming
On 10/07/2013 06:42 AM, Ming Lei wrote:
> On Mon, Oct 7, 2013 at 1:31 AM, Dan Murphy wrote:
>> On 10/06/2013 10:05 AM, Ming Lei wrote:
>>> On Sat, Oct 5, 2013 at 2:25 AM, Dan Murphy wrote:
If the smsc95xx does not have a valid MAC address stored within
the eeprom then a random num
On Thu, Oct 10, 2013 at 8:08 PM, Dan Murphy wrote:
>
> You are correct I don't expect a match for PnP devices only devices that are
> hard wired.
>
> After thinking of it I should move the OF code below the EEPROM code as the
> EEPROM should take preference over the DT code.
>
> I will need to p
On 10/10/2013 07:39 AM, Ming Lei wrote:
> On Thu, Oct 10, 2013 at 8:08 PM, Dan Murphy wrote:
>> You are correct I don't expect a match for PnP devices only devices that are
>> hard wired.
>>
>> After thinking of it I should move the OF code below the EEPROM code as the
>> EEPROM should take pref
On 10/07/2013 06:52 PM, Xenia Ragiadakou wrote:
[snip]
+static int xhci_reset_ep0(struct xhci_hcd *xhci, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_virt_device *vdev;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx
On Tue, Oct 08, 2013 at 10:28:29AM -0400, Alan Stern wrote:
> Felipe:
>
> I've got an Android device that uses the omap2430 musb driver. It's
> configured to go into device mode when it starts up, which I guess is
> the normal thing for Android devices to do.
>
> Can you explain how to switch th
On Wed, Oct 09, 2013 at 10:32:12PM +0200, Laurent Pinchart wrote:
> Hi Valentine,
>
> Thank you for the patch.
>
> On Tuesday 08 October 2013 23:43:25 Valentine Barshak wrote:
> > This adds RCAR Gen2 USB phy support. The driver configures
> > USB channels 0/2 which are shared between PCI USB host
Hi,
On Thu, Oct 10, 2013 at 01:21:27AM +0400, Valentine wrote:
> On 10/10/2013 12:32 AM, Laurent Pinchart wrote:
> >Hi Valentine,
> >
>
> Hi Laurent,
>
> >Thank you for the patch.
> >
> >On Tuesday 08 October 2013 23:43:25 Valentine Barshak wrote:
> >>This adds RCAR Gen2 USB phy support. The dri
Hi,
On Thu, Oct 10, 2013 at 01:47:26AM +0400, Valentine wrote:
> >>>I would use either
> >>>
> >>> depends on ARM
> >>>
> >>>or
> >>>
> >>> depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST
> >>>
> >>>(assuming the driver can compile on non-ARM platforms, otherwise the above
> >>>line co
Hi,
On Thu, Oct 10, 2013 at 02:14:45AM +0400, Valentine Barshak wrote:
> This adds RCAR Gen2 USB phy support. The driver configures
> USB channels 0/2 which are shared between PCI USB hosts and
> USBHS/USBSS devices. It also controls internal USBHS phy.
>
> Signed-off-by: Valentine Barshak
> ---
On Mon, Oct 07, 2013 at 06:12:29AM -0400, Matt Porter wrote:
> Extend dwc2 binding with an optional utmi phy width property.
> Enable the s3c-hsotg.c driver to use standard dwc2 binding
> and enable configuration of the UTMI phy width based on the
> property.
>
> Signed-off-by: Matt Porter
> Revi
Hi,
On Mon, Oct 07, 2013 at 06:12:30AM -0400, Matt Porter wrote:
> Broadcom BCM281xx parts have a PHY control block that
> operates in conjunction with the DWC2 USB OTG. This driver
> exposes an API that allows control of power/reset for a
> connected USB PHY.
>
> Signed-off-by: Matt Porter
> Re
On Mon, Oct 07, 2013 at 01:46:50PM +0300, Roger Quadros wrote:
> The generic PHY framewrok expects different properties than the
> old USB PHY framework. Supply those properties.
>
> Fixes USB OTG port on beagle after the Generic PHY framework was
> merged in greg/usb-next. [1]
>
> [1] - https://
On Mon, Oct 07, 2013 at 04:28:13PM +0300, Roger Quadros wrote:
> The generic PHY framewrok expects different properties than the
> old USB PHY framework. Supply those properties.
>
> Fixes USB OTG port on GAT04 and N900 after the Generic PHY framework was
> merged in greg/usb-next. [1]
>
> [1] -
Hi,
On Wed, Oct 02, 2013 at 10:52:06AM +0200, Andreas Larsson wrote:
> >hmm, there are two ways to look at this.
> >
> >a) we have KERN_CONT to continue printing messages
> >b) you might prefer using debugfs and seq_puts() for dumping large(-ish)
> >amounts of debugging data ;-)
>
> I just found
Hi,
sorry for the delay...
On Wed, Oct 02, 2013 at 03:07:25PM +0200, Sebastian Andrzej Siewior wrote:
> > On Tue, Aug 13, 2013 at 07:49:43PM +0200, Sebastian Andrzej Siewior
> > wrote:
> >> This patch defines four types of current supported DMA engines
> >> and assignes them to each dma engine. T
Hi Felipe,
On Thu, Oct 10, 2013 at 10:10:52AM -0500, Felipe Balbi wrote:
> On Tue, Oct 08, 2013 at 10:28:29AM -0400, Alan Stern wrote:
> > Felipe:
> >
> > I've got an Android device that uses the omap2430 musb driver. It's
> > configured to go into device mode when it starts up, which I guess is
On Thu, 10 Oct 2013, Felipe Balbi wrote:
> On Tue, Oct 08, 2013 at 10:28:29AM -0400, Alan Stern wrote:
> > Felipe:
> >
> > I've got an Android device that uses the omap2430 musb driver. It's
> > configured to go into device mode when it starts up, which I guess is
> > the normal thing for Androi
Hi,
On Wed, Oct 09, 2013 at 08:41:57AM +0200, Robert Baldyga wrote:
> @@ -2616,14 +2630,19 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
> s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps);
>
> /* default, set to non-periodic */
> + hs_ep->isochronous = 0;
> hs_ep
Hi,
On Thu, Oct 10, 2013 at 11:49:17AM -0400, Alan Stern wrote:
> On Thu, 10 Oct 2013, Felipe Balbi wrote:
>
> > On Tue, Oct 08, 2013 at 10:28:29AM -0400, Alan Stern wrote:
> > > Felipe:
> > >
> > > I've got an Android device that uses the omap2430 musb driver. It's
> > > configured to go into
HI,
On Thu, Oct 10, 2013 at 11:45:47PM +0800, Huang Rui wrote:
> On Thu, Oct 10, 2013 at 10:10:52AM -0500, Felipe Balbi wrote:
> > On Tue, Oct 08, 2013 at 10:28:29AM -0400, Alan Stern wrote:
> > > Felipe:
> > >
> > > I've got an Android device that uses the omap2430 musb driver. It's
> > > confi
So I captured this:
|WARNING: CPU: 0 PID: 2078 at
/home/bigeasy/work/new/TI/linux/lib/debugobjects.c:260
debug_print_object+0x94/0xc4()
|ODEBUG: free active (active state 0) object type: work_struct hint:
musb_irq_work+0x0/0x38 [musb_hdrc]
|CPU: 0 PID: 2078 Comm: rmmod Not tainted 3.12.0-rc4+ #
I have am335x-evm with one port running in OTG mode. Since commit
fe4cb09 ("usb: musb: gadget: remove hcd initialization") the loaded
gadget does non pop up on the host. All I see is
|usb 4-5: new high-speed USB device number 52 using ehci-pci
|usb 4-5: device descriptor read/64, error -110
A few
On 10/10/2013 07:23 PM, Felipe Balbi wrote:
Hi,
On Thu, Oct 10, 2013 at 02:14:45AM +0400, Valentine Barshak wrote:
This adds RCAR Gen2 USB phy support. The driver configures
USB channels 0/2 which are shared between PCI USB hosts and
USBHS/USBSS devices. It also controls internal USBHS phy.
Si
Hi,
On Thu, Oct 10, 2013 at 08:29:43PM +0400, Valentine wrote:
> On 10/10/2013 07:23 PM, Felipe Balbi wrote:
> >Hi,
> >
> >On Thu, Oct 10, 2013 at 02:14:45AM +0400, Valentine Barshak wrote:
> >>This adds RCAR Gen2 USB phy support. The driver configures
> >>USB channels 0/2 which are shared between
Hi,
On Thu, Oct 10, 2013 at 06:28:32PM +0200, Sebastian Andrzej Siewior wrote:
> I have am335x-evm with one port running in OTG mode. Since commit
> fe4cb09 ("usb: musb: gadget: remove hcd initialization") the loaded
> gadget does non pop up on the host. All I see is
> |usb 4-5: new high-speed USB
This adds RCAR Gen2 USB phy support. The driver configures
USB channels 0/2 which are shared between PCI USB hosts and
USBHS/USBSS devices. It also controls internal USBHS phy.
Signed-off-by: Valentine Barshak
---
drivers/usb/phy/Kconfig | 13 ++
drivers/usb/phy/Makefile
On 10.10.2013 18:33, Felipe Balbi wrote:
> Hi,
>
> On Thu, Oct 10, 2013 at 06:28:32PM +0200, Sebastian Andrzej Siewior wrote:
>> I have am335x-evm with one port running in OTG mode. Since commit
>> fe4cb09 ("usb: musb: gadget: remove hcd initialization") the loaded
>> gadget does non pop up on the
Since commit 0f9548ca1 ("lockdep: check that no locks held at freeze
time") I see the following backtrace in the file storage gadget [0]:
|=
|[ BUG: file-storage/662 still has locks held! ]
|3.12.0-rc4+ #2 Not tainted
|-
|1 loc
* Daniel Mack | 2013-10-10 18:37:38 [+0200]:
>>> This patch fixes the problem for me. My question how do we do a pretty
>>> version of this hack?
>
>Sebastian: thanks for addressing this. It has bugged quite some people
>already.
You're welcome.
>> then perhaps musb_start() should be moved out of
On 10/10/2013 11:29 AM, Felipe Balbi wrote:
On Mon, Oct 07, 2013 at 06:12:29AM -0400, Matt Porter wrote:
Extend dwc2 binding with an optional utmi phy width property.
Enable the s3c-hsotg.c driver to use standard dwc2 binding
and enable configuration of the UTMI phy width based on the
property.
On 10/10/2013 06:37 PM, Daniel Mack wrote:
> Other than that, please make sure not to call that function more than
> once for dual role mode.
A small hint please. We need it once in the hub code. So the host mode
works if no gadget is loaded. And we need once in musb_gadget_start() so
it executed
On 10.10.2013 19:03, Sebastian Andrzej Siewior wrote:
> On 10/10/2013 06:37 PM, Daniel Mack wrote:
>> Other than that, please make sure not to call that function more than
>> once for dual role mode.
>
> A small hint please. We need it once in the hub code. So the host mode
> works if no gadget is
On Thu, 10 Oct 2013, Sebastian Andrzej Siewior wrote:
> Since commit 0f9548ca1 ("lockdep: check that no locks held at freeze
> time") I see the following backtrace in the file storage gadget [0]:
> |=
> |[ BUG: file-storage/662 still has locks held! ]
> |3.12.0-
On Thu, 10 Oct 2013, Felipe Balbi wrote:
> IIRC the debugfs interface is suppposedly a little better.
>
> /me goes check the code
>
> here it goes, just wrote "force host" to
> /sys/kernel/debug/musb*/testmode
>
> Hopefully they have that enabled :-)
Thanks for the information. I'll try it ou
On Thu, Oct 10, 2013 at 11:26:47AM -0500, Felipe Balbi wrote:
> HI,
>
> On Thu, Oct 10, 2013 at 11:45:47PM +0800, Huang Rui wrote:
> > On Thu, Oct 10, 2013 at 10:10:52AM -0500, Felipe Balbi wrote:
> > > On Tue, Oct 08, 2013 at 10:28:29AM -0400, Alan Stern wrote:
> >
> > I also have a question for
On Thu, Oct 10, 2013 at 03:22:32PM +0800, zhang.y...@zte.com.cn wrote:
>
> Hi, Greg KH:
>
> Now we have 3g/4g wireless modem product and many linux users use this product
> on their system, so
>
> we want to add these product's pid to usb serial driver option.c.
>
> How to do this?
You can eit
Hi,
On Fri, Oct 11, 2013 at 01:13:57AM +0800, Huang Rui wrote:
> On Thu, Oct 10, 2013 at 11:26:47AM -0500, Felipe Balbi wrote:
> > HI,
> >
> > On Thu, Oct 10, 2013 at 11:45:47PM +0800, Huang Rui wrote:
> > > On Thu, Oct 10, 2013 at 10:10:52AM -0500, Felipe Balbi wrote:
> > > > On Tue, Oct 08, 201
Hi,
On Thu, Oct 10, 2013 at 12:54:40PM -0400, Matt Porter wrote:
> On 10/10/2013 11:29 AM, Felipe Balbi wrote:
> >On Mon, Oct 07, 2013 at 06:12:29AM -0400, Matt Porter wrote:
> >>Extend dwc2 binding with an optional utmi phy width property.
> >>Enable the s3c-hsotg.c driver to use standard dwc2 bi
On Wed, Oct 09 2013, Andrzej Pietrasiewicz wrote:
> Convert the legacy acm_ms gadget to use the new function interface
> of f_mass_storage, so that later the compatibility layer in
> f_mass_storage can be removed.
>
> Signed-off-by: Andrzej Pietrasiewicz
> Signed-off-by: Kyungmin Park
Acked-by:
On Wed, Oct 09 2013, Andrzej Pietrasiewicz wrote:
> Convert old mass_storage gadget to use the new interface of f_mass_storage
> so that later the compatibility layer in f_mass_storage can be removed.
>
> struct fsg_common is not known to mass_storage.c, so a setter method
> is added to f_mass_stor
On Wed, Oct 09 2013, Andrzej Pietrasiewicz wrote:
> Show/store methods for sysfs attributes contain code which can be used
> also by configfs. Make them abstract the source the lun and rw_semaphore
> are taken from.
>
> Signed-off-by: Andrzej Pietrasiewicz
> Signed-off-by: Kyungmin Park
Ackedy-b
> From: Felipe Balbi [mailto:ba...@ti.com]
> Sent: Thursday, October 10, 2013 10:46 AM
>
> On Thu, Oct 10, 2013 at 12:54:40PM -0400, Matt Porter wrote:
> > On 10/10/2013 11:29 AM, Felipe Balbi wrote:
> > >On Mon, Oct 07, 2013 at 06:12:29AM -0400, Matt Porter wrote:
> > >>Extend dwc2 binding with a
On Wed, Oct 09 2013, Andrzej Pietrasiewicz wrote:
> This will be required by configfs integration.
>
> Signed-off-by: Andrzej Pietrasiewicz
> Signed-off-by: Kyungin Park
> ---
> drivers/usb/gadget/storage_common.c | 42
> +++
> drivers/usb/gadget/storage_common
Hi,
On Thu, Oct 10, 2013 at 05:57:54PM +, Paul Zimmerman wrote:
> > From: Felipe Balbi [mailto:ba...@ti.com]
> > Sent: Thursday, October 10, 2013 10:46 AM
> >
> > On Thu, Oct 10, 2013 at 12:54:40PM -0400, Matt Porter wrote:
> > > On 10/10/2013 11:29 AM, Felipe Balbi wrote:
> > > >On Mon, Oct
> From: Felipe Balbi [mailto:ba...@ti.com]
> Sent: Thursday, October 10, 2013 11:07 AM
>
> On Thu, Oct 10, 2013 at 05:57:54PM +, Paul Zimmerman wrote:
> > > From: Felipe Balbi [mailto:ba...@ti.com]
> > > Sent: Thursday, October 10, 2013 10:46 AM
> > >
> > > On Thu, Oct 10, 2013 at 12:54:40PM -
Hi Xenia,
On Mon, Oct 07, 2013 at 06:52:39PM +0300, Xenia Ragiadakou wrote:
> The previous patch on the endpoint reset uses the already implemented function
> xhci_drop_endpoint() to reduce code duplication. However, the way that xhci
> updates the last valid endpoint in the Input Slot Context, wh
Hi Bjørn,
I can't answer your Questions.
Do you recommend / know a usb-sniffer for Win8?
In the meantime, I have got the first ipv4-connection:
hpmini:~ # mbim-network /dev/cdc-wdm0 start
Loading profile...
APN: internet.telekom
Querying subscriber ready status 'mbimcli -d /dev/cdc-wdm0 --
Always cross check with the ID state and the source of interrupt.
Also add a case in which ID Source is ID_GND but LATCH state is set
wrongly. This uses the previous Link stat to determine the new state.
Signed-off-by: George Cherian
---
drivers/extcon/extcon-palmas.c | 15 ---
1 fil
Hi,
On Thu, Oct 10, 2013 at 06:14:19PM +, Paul Zimmerman wrote:
> > From: Felipe Balbi [mailto:ba...@ti.com]
> > Sent: Thursday, October 10, 2013 11:07 AM
> >
> > On Thu, Oct 10, 2013 at 05:57:54PM +, Paul Zimmerman wrote:
> > > > From: Felipe Balbi [mailto:ba...@ti.com]
> > > > Sent: Thu
On Fri, Oct 04, 2013 at 12:29:43AM +0200, Hans de Goede wrote:
> Hi All,
Hi Hans,
> After spending 1.5 weeks debugging issues with xhci streams which would
> hard-freeze my machine every 5 minutes, I'm very happy to present this
> patch set, with which usb 3 streams are fully stable for me, inclu
On 10/10/2013 01:57 PM, Paul Zimmerman wrote:
From: Felipe Balbi [mailto:ba...@ti.com]
Sent: Thursday, October 10, 2013 10:46 AM
On Thu, Oct 10, 2013 at 12:54:40PM -0400, Matt Porter wrote:
On 10/10/2013 11:29 AM, Felipe Balbi wrote:
On Mon, Oct 07, 2013 at 06:12:29AM -0400, Matt Porter wrote:
Hi,
On 10/10/2013 09:04 PM, Sarah Sharp wrote:
On Fri, Oct 04, 2013 at 12:29:43AM +0200, Hans de Goede wrote:
Hi All,
Hi Hans,
After spending 1.5 weeks debugging issues with xhci streams which would
hard-freeze my machine every 5 minutes, I'm very happy to present this
patch set, with which
Hi,
recently I have been working on mainlining a simple bus glue driver
for the USB EHCI for the Allwinner family of the ARM SoCs aka sunxi.
The patches are almost ready and can be found at [1] and will be
submitted once completely ready. The most interesting patch is [2]
which is a driver itself.
Thomas Schäfer writes:
> Do you recommend / know a usb-sniffer for Win8?
http://desowin.org/usbpcap/
Using the wireshark layered dissectors is really nice. I am just lazy,
waiting for someone to make a MBIM dissector :-)
> In the meantime, I have got the first ipv4-connection:
Yes, that sho
Today's linux-next merge of the usb-gadget tree got conflicts in
drivers/usb/musb/davinci.c caused by an add in ea78201e2 (usb: musb:
davinci: fix resources passed to MUSB driver for DM6467) adjacent to
the modification of the device registration in 4c9ad1059 (DMA-API: usb:
musb: use platform_devic
Hi,
On Thu, Oct 10, 2013 at 10:20:30PM +0100, Mark Brown wrote:
> Today's linux-next merge of the usb-gadget tree got conflicts in
> drivers/usb/musb/davinci.c caused by an add in ea78201e2 (usb: musb:
> davinci: fix resources passed to MUSB driver for DM6467) adjacent to
> the modification of the
moved else keyword of if-else construct to closing braces.
Signed-off-by: Matthias Beyer
---
drivers/usb/core/devio.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 215d882..adbdea3 100644
--- a/drivers/usb/core
Added braces around switch statement as the styleguide tells us.
Indented the switch-block for it and split a function call
(driver->unlocked_ioctl() on line 1876) arguments to several lines to
fit the 80-column convention.
Signed-off-by: Matthias Beyer
---
drivers/usb/core/devio.c | 60
Signed-off-by: Matthias Beyer
---
drivers/usb/core/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 903c7ef..3bdfbf8 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -27,7 +27,7 @@
static const
Signed-off-by: Matthias Beyer
---
drivers/usb/core/hub.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index e5fdf4b..5e9fc21 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2488,7 +2488,7 @@ error_devi
including:
- removing of trailing whitespace
- removing spaces before array indexing (foo [] to foo[])
- reindention of a switch-case block
- spaces to tabs
Signed-off-by: Matthias Beyer
---
drivers/usb/core/file.c | 6 +--
drivers/usb/core/hub.c | 111 +++--
Whitespace fixes, including:
- Whitespace after if-keyword
- Spaces to Tabs
Other coding style fixes:
- Added braces for if-else blocks where missing
Signed-off-by: Matthias Beyer
---
drivers/usb/core/devio.c | 39 ---
1 file changed, 20 insertions(+), 19 d
Hi,
I patches several files in drivers/usb/core/ to adapt them to the kernel
styleguide.
Most of these patches are whitespace/indention fixes.
As these patches are only style-patches, I just compiled the kernel, no compile
errors or warnings. So I think everything seems to be okay!
Note: I did
Hi Sipter and Marcus,
Xenia has a potential fix for a long-standing bug in the xHCI driver,
and I need your help testing it. You ran into that bug back in Feb
2013:
http://sourceforge.net/mailarchive/forum.php?thread_name=CAGjSPUAQ8phZFu9dj60wt9zZpoghcQMVUAwgd2y3NvLmiAZH7Q%40mail.gmail.com&forum
From: Mathias Nyman
If a command on the command ring needs to be cancelled before it is handled
it can be turned to a no-op operation when the ring is stopped.
We want to store the command ring enqueue pointer in the command structure
when the command in enqueued for the cancellation case.
Some
The usage of USB_CTRL_SET_TIMEOUT in xhci is incorrect.
The definition of USB_CTRL_SET_TIMEOUT is 5000ms. The
input timeout to wait_for_completion_interruptible_timeout
is jiffies. That makes the timeout be longer than what
we want, such as 50s in some platform.
The patch is to use XHCI_CMD_DEFAUL
On Thu, Oct 10, 2013 at 8:47 PM, Dan Murphy wrote:
>
> Is there a board that has 2 built in smsc devices?
I don't know, maybe there isn't, but driver should be generic enough, and
as I said it is a generic problem, and people are discussing it, so suggest
to read previous discussions first before
On Thu, Oct 10, 2013 at 09:21:36PM +0200, Arokux X wrote:
> Hi,
>
> recently I have been working on mainlining a simple bus glue driver
> for the USB EHCI for the Allwinner family of the ARM SoCs aka sunxi.
> The patches are almost ready and can be found at [1] and will be
> submitted once complet
On 10/10/2013 03:07 PM, Matt Porter wrote:
On 10/10/2013 01:57 PM, Paul Zimmerman wrote:
From: Felipe Balbi [mailto:ba...@ti.com]
Sent: Thursday, October 10, 2013 10:46 AM
On Thu, Oct 10, 2013 at 12:54:40PM -0400, Matt Porter wrote:
On 10/10/2013 11:29 AM, Felipe Balbi wrote:
On Mon, Oct 07,
1. Add new supporting declarations to option.c, to support Huawei new devices
with new bInterfaceSubClass value.
Signed-off-by: fangxiaozhi
--- linux-3.11.4-orig/drivers/usb/serial/option.c 2013-10-10 16:13:25.443072876
+0800
+++ linux-3.11.4/drivers/usb/serial/o
Hi Felipe,
On Thu, Oct 10, 2013 at 12:44:05PM -0500, Felipe Balbi wrote:
> Hi,
>
> On Fri, Oct 11, 2013 at 01:13:57AM +0800, Huang Rui wrote:
> > On Thu, Oct 10, 2013 at 11:26:47AM -0500, Felipe Balbi wrote:
> > > HI,
> > >
> > > On Thu, Oct 10, 2013 at 11:45:47PM +0800, Huang Rui wrote:
> > > >
Signed-off-by: Andreas Larsson
---
drivers/usb/gadget/Kconfig | 14 ++
drivers/usb/gadget/Makefile |3 ++-
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 48cddf3..922a04d 100644
--- a/drivers/usb/gadg
On Friday 11 October 2013 12:51 AM, Arokux X wrote:
> Hi,
>
> recently I have been working on mainlining a simple bus glue driver
> for the USB EHCI for the Allwinner family of the ARM SoCs aka sunxi.
> The patches are almost ready and can be found at [1] and will be
> submitted once completely re
Hello,
On 10/10/2013 06:04 PM, Felipe Balbi wrote:
> Hi,
>
> On Wed, Oct 09, 2013 at 08:41:57AM +0200, Robert Baldyga wrote:
>> @@ -2616,14 +2630,19 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
>> s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps);
>>
>> /* default, set to n
88 matches
Mail list logo
