Always cross check with the ID state and the source of interrupt.
Also add a case in which ID Source is ID_GND but LATCH state is set
wrongly. This uses the previous Link stat to determine the new state.
Signed-off-by: George Cherian <george.cher...@ti.com>
---
drivers/extcon/extcon-palmas.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 6e83e9a..2aea4bc 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -78,20 +78,24 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void
*_palmas_usb)
static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
{
- unsigned int set;
+ unsigned int set, id_src;
struct palmas_usb *palmas_usb = _palmas_usb;
palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_SET, &set);
+ palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
+ PALMAS_USB_ID_INT_SRC, &id_src);
- if (set & PALMAS_USB_ID_INT_SRC_ID_GND) {
+ if ((set & PALMAS_USB_ID_INT_SRC_ID_GND) &&
+ (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true);
dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
- } else if (set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) {
+ } else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
+ (id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
@@ -103,6 +107,11 @@ static irqreturn_t palmas_id_irq_handler(int irq, void
*_palmas_usb)
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
+ } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
+ (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
+ palmas_usb->linkstat = PALMAS_USB_STATE_ID;
+ extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true);
+ dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
}
return IRQ_HANDLED;
--
1.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
