will add an FPP FPGA manager driver for it.
The FTDI protocol code and prototypes was borrowed from libftdi.
Signed-off-by: Anatolij Gustschin
---
MAINTAINERS |8 +
drivers/usb/misc/Kconfig| 10 +
drivers/usb/misc/Makefile |1 +
drivers/usb/misc/ft232h
Add FPGA manager driver for loading ARRI Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
.../ABI/testing/sysfs-driver-ftdi-fifo-fpp| 7 +
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile
: Anatolij Gustschin
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c | 651 +++
3 files changed, 659 insertions(+)
create mode 100644 drivers/spi/spi-ftdi-mpsse.c
diff --git a/drivers/spi/Kconfig b/drivers
ew FT232H interface
driver and extend it according to CPLD changes for additional
support of new hardware revision B.
Anatolij Gustschin (3):
usb: misc: add driver for FT232H based FPGA configuration devices
spi: add FTDI MPSSE SPI controller driver
fpga: Add fpga manager driver
Hi,
On Wed, 5 Dec 2018 22:10:40 +0800
Song Qiang songqiang1304...@gmail.com wrote:
...
>I've been developing some iio device drivers and found that some people
>would like to test their devices with a qemu system which requires an
>i2c or spi port on our development hosts. Usually this is achieved
Hi Mark,
On Tue, 27 Nov 2018 18:54:37 +0100
Anatolij Gustschin ag...@denx.de wrote:
>Add SPI bus controller driver for FTDI MPSSE mode. This driver
>is supposed to be used together with the FT232H interface driver
>for FPGA configuration in drivers/usb/misc/ft232h-intf.c which
>adds
Hi Alan,
On Tue, 27 Nov 2018 18:54:38 +0100
Anatolij Gustschin ag...@denx.de wrote:
>Add FPGA manager driver for loading ARRI Altera FPGAs via fast
>passive parallel (FPP) interface using FTDI FT232H chip.
Ping. Is this patch okay? I suppose that it will go via usb tree
as part of the
: Anatolij Gustschin
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c | 651 +++
3 files changed, 659 insertions(+)
create mode 100644 drivers/spi/spi-ftdi-mpsse.c
diff --git a/drivers/spi/Kconfig b/drivers
will add an FPP FPGA manager driver for it.
The FTDI protocol code and prototypes was borrowed from libftdi.
Signed-off-by: Anatolij Gustschin
---
MAINTAINERS |8 +
drivers/usb/misc/Kconfig|9 +
drivers/usb/misc/Makefile |1 +
drivers/usb/misc/ft232h
Add FPGA manager driver for loading ARRI Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
.../ABI/testing/sysfs-driver-ftdi-fifo-fpp| 7 +
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile
ew FT232H interface
driver and extend it according to CPLD changes for additional
support of new hardware revision B.
Anatolij Gustschin (3):
usb: misc: add driver for FT232H based FPGA configuration devices
spi: add FTDI MPSSE SPI controller driver
fpga: Add fpga manager driver for ARRI Altera
On Wed, 21 Nov 2018 12:42:37 +
Mark Brown broo...@kernel.org wrote:
...
>> obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o
>> +obj-$(CONFIG_SPI_FTDI_MPSSE)+= spi-ftdi-mpsse.o
>>
>> # SPI slave protocol handlers
>> obj-$(CONFIG_SPI_SLAVE_TIME)
On Fri, 23 Nov 2018 16:10:54 +0100
Greg KH gre...@linuxfoundation.org wrote:
...
>> Fixes: 0772a5bf580c ("usb: misc: add driver for FT232H based FPGA
>> configuration devices")
>
>I can't find this commit anywhere, nor the file that this patch touches.
>
>What tree is it in?
This new driver was
On Tue, 20 Nov 2018 00:56:13 +
Trent Piepho tpie...@impinj.com wrote:
>On Tue, 2018-11-20 at 01:28 +0100, Anatolij Gustschin wrote:
>> Add USB interface driver for ARRI FPGA configuration devices based on
>> FTDI FT232H chip. Depending on USB PID the driver registers differ
: Anatolij Gustschin
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c | 673 +++
3 files changed, 681 insertions(+)
create mode 100644 drivers/spi/spi-ftdi-mpsse.c
diff --git a/drivers/spi/Kconfig b/drivers
will add an FPP FPGA manager driver for it.
The FTDI protocol code and prototypes was borrowed from libftdi.
Signed-off-by: Anatolij Gustschin
---
MAINTAINERS |8 +
drivers/usb/misc/Kconfig|9 +
drivers/usb/misc/Makefile |1 +
drivers/usb/misc/ft232h
l attempt didn't include USB SPI bus support for PS-
SPI FPGA configuration via USB)
- rework FPP fpga manager driver based on new FT232H interface
driver and extend it according to CPLD changes for additional
support of new hardware revision B.
Anatolij Gustschin (3):
us
Add FPGA manager driver for loading ARRI Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
.../ABI/testing/sysfs-driver-ftdi-fifo-fpp| 7 +
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile
On Tue, 13 Nov 2018 10:11:32 -0800
Mark Brown broo...@kernel.org wrote:
>Please don't do this, the numbering for a patch series only makes sense
>for ordering the patches within a series. If you're just sending a
>single patch then there's no need to number anything, or the patch
>series hasn't b
On Fri, 9 Nov 2018 15:30:26 +
Mark Brown broo...@kernel.org wrote:
>On Fri, Nov 09, 2018 at 08:53:56AM +0100, Anatolij Gustschin wrote:
>> Add SPI bus controller driver for FTDI MPSSE mode. This driver
>> is supposed to be used together with the FT232H interface dri
: Anatolij Gustschin
---
Changes in v2:
- fix build breakage when building with ARCH=i386 allmodconfig
- add checks for ops->lock/ops->unlock presence in pdata
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c
On Tue, 6 Nov 2018 13:07:13 +0800
kbuild test robot l...@intel.com wrote:
...
>from drivers/spi/spi-ftdi-mpsse.c:11:
>>> arch/x86/include/uapi/asm/ptrace-abi.h:20:13: error: expected identifier
>>> before numeric constant
>#define CS 13
>^
>>> drivers/spi
Hi Alan,
On Mon, 5 Nov 2018 12:52:03 -0600
Alan Tull at...@kernel.org wrote:
>On Mon, Nov 5, 2018 at 10:19 AM Anatolij Gustschin wrote:
>
>Hi Anatolij,
>
>>
>> This series adds drivers and FPGA manager support required
>> for FT232H based ARRI FPGA configuration a
Add FPGA manager driver for loading ARRI Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile| 1 +
drivers/fpga/ftdi-fifo-fpp.c | 594
will add an FPP FPGA manager driver for it.
The FTDI protocol code and prototypes was borrowed from libftdi.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/misc/Kconfig|9 +
drivers/usb/misc/Makefile |1 +
drivers/usb/misc/ft232h-intf.c | 1468
ARRI FPP adapters for
FPGA configuration via Altera fast passive parallel interface.
Anatolij Gustschin (3):
usb: misc: add driver for FT232H based FPGA configuration devices
spi: add FTDI MPSSE SPI controller driver
fpga: Add fpga manager driver for ARRI Altera FPP
drivers/fpga/Kconfig
: Anatolij Gustschin
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c | 671 +++
3 files changed, 679 insertions(+)
create mode 100644 drivers/spi/spi-ftdi-mpsse.c
diff --git a/drivers/spi/Kconfig b/drivers
Hi Geert,
On Fri, 8 Dec 2017 10:27:46 +0100
Geert Uytterhoeven ge...@linux-m68k.org wrote:
[...]
>A quick Google shows the FT232H chip in MPSSE mode can also support i2c.
>I guess your design can be extended for that, too, using another VID/PID
>pair?
Yes, this should be doable.
Thanks,
Anatol
On Thu, 7 Dec 2017 14:24:57 -0600
Alan Tull at...@kernel.org wrote:
...
>> Instead of MFD part as in previous version I intend to add an USB misc
>> driver for our FPGA configuration adapters under drivers/usb/misc.
>> When probing for VID/PID assigned to FIFO-FPP adapter type, this
>> driver will
Hi,
I have to rework drivers for custom FT232H based FPGA configuration
adapters to make them suitable for including in mainline kernel. These
adapters should be usable via low-level drivers for FPGA Manager
framework. Two required low-level FPGA Manager drivers (for PS-SPI and
CvP configurations)
On Tue, 25 Jul 2017 13:49:08 +0200
Johan Hovold jo...@kernel.org wrote:
>On Wed, Jul 19, 2017 at 01:58:30PM +0200, Anatolij Gustschin wrote:
>> On Mon, 10 Jul 2017 14:52:10 +0200
>> Johan Hovold jo...@kernel.org wrote:
>>
>> >On Thu, Jul 06, 2017 at 10:49:16PM +
On Tue, 25 Jul 2017 13:52:35 +0200
Johan Hovold jo...@kernel.org wrote:
>On Wed, Jul 19, 2017 at 02:59:00PM +0200, Anatolij Gustschin wrote:
>> On Wed, 19 Jul 2017 10:59:34 +0200
>> Johan Hovold jo...@kernel.org wrote:
>
>> >> And as David Laight already point
On Wed, 19 Jul 2017 13:39:36 +
David Laight david.lai...@aculab.com wrote:
>From: Anatolij Gustschin
>> Sent: 19 July 2017 14:30
>...
>> >Stupid question, I know, but I cannot help thinking: If you have an
>> >EEPROM then why the h... don't you use an
On Wed, 12 Jul 2017 11:11:46 +0200
Bjørn Mork bj...@mork.no wrote:
>Johan Hovold writes:
>> On Tue, Jul 11, 2017 at 08:52:37AM +0200, Anatolij Gustschin wrote:
>>
>>> For devices with connected EEPROM some modes (including UART) are
>>> configurable in the E
On Wed, 19 Jul 2017 10:59:34 +0200
Johan Hovold jo...@kernel.org wrote:
...
>> > +static const struct mfd_cell ftdi_cells[] = {
>> > + { .name = "ftdi-cbus-gpio", },
>> > + { .name = "ftdi-mpsse-i2c", },
>> > + { .name = "ftdi-mpsse-spi", },
>> > + { .name = "ftdi-fifo-fpp-mgr", },
>> > +};
>
On Mon, 10 Jul 2017 14:52:10 +0200
Johan Hovold jo...@kernel.org wrote:
>On Thu, Jul 06, 2017 at 10:49:16PM +0200, Anatolij Gustschin wrote:
>> Add USB part with common functions for USB-GPIO/I2C/SPI master
>> adapters. These allow communication with chip's control, tra
On Wed, 19 Jul 2017 11:03:11 +0200
Johan Hovold jo...@kernel.org wrote:
>On Thu, Jul 13, 2017 at 06:25:25PM +0200, Anatolij Gustschin wrote:
>> On FT232H the interface mode can be configured in the EEPROM,
>> and the async UART mode is configured by default. The chip is
>> al
On Wed, 12 Jul 2017 10:50:03 +0200
Johan Hovold jo...@kernel.org wrote:
...
>IIRC we should be able read from the EEPROM, and I would at least expect
>there to be a way to retrieve the current mode as well.
I've just send a patch for ftdi_sio.
Thanks,
Anatolij
--
To unsubscribe from this list: s
.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/serial/ftdi_sio.c | 62 ++-
drivers/usb/serial/ftdi_sio.h | 12 +
2 files changed, 73 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index
On Mon, 10 Jul 2017 14:34:27 +0200
Johan Hovold jo...@kernel.org wrote:
>On Fri, Jul 07, 2017 at 11:53:29AM +0200, Anatolij Gustschin wrote:
>> On Fri, 07 Jul 2017 09:48:48 +0200
>> Bjørn Mork bj...@mork.no wrote:
>>
>> >[adding Johan on the CC list]
>&
On Fri, 07 Jul 2017 09:48:48 +0200
Bjørn Mork bj...@mork.no wrote:
>[adding Johan on the CC list]
>
>Anatolij Gustschin writes:
>
>> +static struct usb_device_id ftdi_mfd_table[] = {
>> +{ USB_DEVICE(0x0403, 0x6014) },
>> +{}
>> +};
>> +MODULE_DE
Add USB part with common functions for USB-GPIO/I2C/SPI master
adapters. These allow communication with chip's control, transmit
and receive endpoints and will be used by various FT232H drivers.
Signed-off-by: Anatolij Gustschin
---
drivers/mfd/Kconfig | 9 +
drivers/mfd/Mak
Add FPGA manager driver for loading Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile| 1 +
drivers/fpga/ftdi-fifo-fpp.c | 569
Add driver for CBUS pins on FT232H. The driver supports setting
GPIO direction and getting/setting CBUS 0-3 pin value. The CBUS
pins have to be enabled by configuring I/O mode in the FTDI EEPROM.
Signed-off-by: Anatolij Gustschin
---
drivers/gpio/Kconfig | 11 ++
drivers/gpio/Makefile
driver for Altera FPP FPGA configuration
via FT232H FT245-FIFO interface.
Anatolij Gustschin (3):
mfd: Add support for FTDI FT232H devices
gpio: Add FT232H CBUS GPIO driver
fpga manager: Add FT232H driver for Altera FPP
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile
On Sat, 30 Nov 2013 23:51:31 +0100
Gerhard Sittig wrote:
> after device tree based clock lookup became available, the peripheral
> driver need no longer construct clock names which include the component
> index -- remove the "usb%d_clk" template, always use "ipg" instead
>
> Cc: Greg Kroah-Hartm
uot;otg_fsm.h" resulting
in another build breakage:
...
In file included from drivers/usb/phy/phy-fsl-usb.c:46:0:
drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or
directory
compilation terminated.
make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1
F
On Fri, 24 May 2013 14:42:46 +
"Thumshirn, Johannes Tobias" wrote:
> Hi list,
>
> I'm experiencing problems while booting on a Freescale P1013 based board. It
> hangs on USB initialization:
> [3.763584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [3.770519] ehci-pci
On Tue, 9 Apr 2013 09:31:18 -0700
Sarah Sharp wrote:
> It sounds like u-boot already has basic xHCI support, and you should
> contact the u-boot developers for further support of interrupt
> transfers.
>
> http://lists.denx.de/mailman/listinfo/u-boot
This is the correct U-Boot list, yes.
> or
Hello Florian,
On Tue, 26 Mar 2013 19:06:14 +0100
Florian Fainelli wrote:
...
> diff --git a/arch/powerpc/platforms/52xx/Kconfig
> b/arch/powerpc/platforms/52xx/Kconfig
> index 90f4496..65232cb 100644
> --- a/arch/powerpc/platforms/52xx/Kconfig
> +++ b/arch/powerpc/platforms/52xx/Kconfig
> @@ -3
Hi Greg,
On Tue, 4 Dec 2012 10:22:06 -0500 (EST)
Alan Stern wrote:
> On Tue, 4 Dec 2012, Anatolij Gustschin wrote:
>
> > mpc5121e doesn't have system interface registers, accessing this
> > register address space cause the machine check exception
Hi Greg,
On Tue, 4 Dec 2012 14:23:21 +0100
Anatolij Gustschin wrote:
> fsl-ehci probing fails on mpc5121e:
> ...
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
> fsl-ehci fsl-ehci.0: new USB
. Fix it.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/otg/Kconfig |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 6223062..37962c9 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -110,7
tup+0x220/0x284
...
Fix it by checking 'have_sysif_regs' flag before register access.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/host/ehci-fsl.c |9 +
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl
i fsl-ehci.0: can't setup
fsl-ehci fsl-ehci.0: USB bus 1 deregistered
fsl-ehci fsl-ehci.0: init fsl-ehci.0 fail, -22
fsl-ehci: probe of fsl-ehci.0 failed with error -22
Fix it by returning appropriate version info for mpc5121, too.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/host/
55 matches
Mail list logo
