On Mon, Aug 12, 2019 at 6:05 AM Hans Verkuil wrote:
>
> Hi Matt,
>
> On 8/11/19 9:10 AM, Matt Ranostay wrote:
> > Add current subpage data via the status register to the video
> > frame in the last word of data, which seems to be unused
> > undocumented res
On Mon, Aug 12, 2019 at 6:05 AM Hans Verkuil wrote:
>
> Hi Matt,
>
> On 8/11/19 9:10 AM, Matt Ranostay wrote:
> > Add current subpage data via the status register to the video
> > frame in the last word of data, which seems to be unused
> > undocumented res
Add current subpage data via the status register to the video
frame in the last word of data, which seems to be unused
undocumented reserved data.
Signed-off-by: Matt Ranostay
---
drivers/media/i2c/video-i2c.c | 12 ++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a
ake the driver in the DRM subsystem. I didn't initially do that
do to missing support for the more exotic pixel formats that MIPI CSI
has e.g. raw bayer. But of course, DRM would give me much easier access
to video timings...
Thanks for any advice.
Matt
You should direct this message to majord...@vger.kernel.org :)
On Tue, Jan 8, 2019 at 4:36 PM Bhanu Murthy V wrote:
>
> unsubscribe linux-media
> ---
> This email message is for the sole use of the intended recipient
own patch
Changes from v3:
* split devicetree binding docs into its own patch
Matt Ranostay (2):
media: video-i2c: check if chip struct has set_power function
media: video-i2c: add Melexis MLX90640 thermal camera support
Matt Ranostay (2):
media: dt-bindings: media: video-i2c: add melexis
.
Signed-off-by: Matt Ranostay
---
drivers/media/i2c/Kconfig | 1 +
drivers/media/i2c/video-i2c.c | 110 +-
2 files changed, 110 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 4c936e129500..a8819686e078
Cc: devicet...@vger.kernel.org
Signed-off-by: Matt Ranostay
---
.../bindings/media/i2c/melexis,mlx90640.txt | 20 +++
1 file changed, 20 insertions(+)
create mode 100644
Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
diff --git a/Documentation/devicetree
On Mon, Nov 26, 2018 at 2:50 PM Hans Verkuil wrote:
>
> On 11/25/2018 05:55 PM, Sakari Ailus wrote:
> > Hi Matt,
> >
> > On Sat, Nov 24, 2018 at 02:03:23PM -0800, Matt Ranostay wrote:
> >> Not all future supported video chips will always have power management
>
Not all future supported video chips will always have power management
support, and so it is important to check before calling set_power() is
defined.
Cc: Sakari Ailus
Cc: Hans Verkuil
Cc: Mauro Carvalho Chehab
Cc: Akinobu Mita
Signed-off-by: Matt Ranostay
---
Changes from v2:
- split out
On Thu, Nov 22, 2018 at 12:57 AM Hans Verkuil wrote:
>
> On 11/22/2018 04:52 AM, Matt Ranostay wrote:
> > Add initial support for MLX90640 thermal cameras which output an 32x24
> > greyscale pixel image along with 2 rows of coefficent data.
> >
> > Because of th
.txt documentation
Matt Ranostay (2):
media: video-i2c: check if chip struct has set_power function
media: video-i2c: add Melexis MLX90640 thermal camera support
.../bindings/media/i2c/melexis,mlx90640.txt | 20 +++
drivers/media/i2c/Kconfig | 1 +
drivers/media/i2c
: devicet...@vger.kernel.org
Signed-off-by: Matt Ranostay
---
.../bindings/media/i2c/melexis,mlx90640.txt | 20
drivers/media/i2c/Kconfig | 1 +
drivers/media/i2c/video-i2c.c | 110 +-
3 files changed, 130 insertions(+), 1 deletion
Not all future supported video chips will always have power management
support, and so it is important to check before calling set_power() is
defined.
Signed-off-by: Matt Ranostay
---
drivers/media/i2c/video-i2c.c | 21 -
1 file changed, 16 insertions(+), 5 deletions
On Mon, Nov 19, 2018 at 6:26 AM Hans Verkuil wrote:
>
> On 11/01/2018 05:15 AM, Matt Ranostay wrote:
> > Add initial support for MLX90640 thermal cameras which output an 32x24
> > greyscale pixel image along with 2 rows of coefficent data.
> >
> > Because of this the
Add initial support for Melexis line of thermal cameras. This is the first part
of
processing pipeline in which the real processing is done in userspace using the
V4L2 camera data.
Dependency patchset series: https://patchwork.kernel.org/cover/10650541/
Matt Ranostay (2):
media: video-i2c
Not all future supported video chips will always have power management
support, and so it is important to check before calling set_power() is
defined.
Signed-off-by: Matt Ranostay
---
drivers/media/i2c/video-i2c.c | 21 -
1 file changed, 16 insertions(+), 5 deletions
.
Signed-off-by: Matt Ranostay
---
drivers/media/i2c/Kconfig | 1 +
drivers/media/i2c/video-i2c.c | 110 +-
2 files changed, 110 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 704af210e270..4bfb2c66d192
On Tue, Oct 30, 2018 at 9:06 AM Julia Lawall wrote:
>
> The vb2_ops structure can be const as it is only stored in the ops
> field of a vb2_queue structure and this field is const.
>
> Done with the help of Coccinelle.
>
> Signed-off-by: Julia Lawall
Acked-by: Matt Ranostay
On Sun, Oct 28, 2018 at 9:25 AM Akinobu Mita wrote:
>
> 2018年10月28日(日) 12:49 Matt Ranostay :
> >
> > On Sat, Oct 20, 2018 at 7:26 AM Akinobu Mita wrote:
> > >
> > > Add macro to compare two v4l2_fract values in v4l2 common internal API.
> > > Th
On Sat, Oct 20, 2018 at 7:26 AM Akinobu Mita wrote:
>
> Add macro to compare two v4l2_fract values in v4l2 common internal API.
> The same macro FRACT_CMP() is used by vivid and bcm2835-camera. This just
> renames it to V4L2_FRACT_COMPARE in order to avoid namespace collision.
On Sat, Oct 20, 2018 at 7:26 AM Akinobu Mita wrote:
>
> AMG88xx has a register for setting frame rate 1 or 10 FPS.
> This adds support changing frame interval.
>
> Reference specifications:
> https://docid81hrs3j1.cloudfront.net/medialibrary/2017/11/PANA-S-A0002141979-1.pdf
>
> Fixes: 5cebaac60974 ("media: video-i2c: add video-i2c driver")
> Cc: Matt Ranostay
Reviewed-by: Matt Ranostay
> Cc: Sakari Ailus
> Cc: Hans Verkuil
> Cc: Mauro Carvalho Chehab
> Signed-off-by: Akinobu Mita
> ---
> * v3
> - Move the code causing use-afte
On Mon, Sep 24, 2018 at 12:35 AM Akinobu Mita wrote:
>
> Use regmap for i2c register access. This simplifies register accesses and
> chooses suitable access commands based on the functionality that the
> adapter supports.
>
> Cc: Matt Ranostay
> Cc: Sakari Ailus
> Cc: H
On Mon, Sep 17, 2018 at 6:03 PM Akinobu Mita wrote:
>
> AMG88xx has a register for setting frame rate 1 or 10 FPS.
> This adds support changing frame interval.
>
> Reference specifications:
> https://docid81hrs3j1.cloudfront.net/medialibrary/2017/11/PANA-S-A0002141979-1.pdf
>
t; https://docid81hrs3j1.cloudfront.net/medialibrary/2017/11/PANA-S-A0002141979-1.pdf
>
> Cc: Matt Ranostay
> Cc: Sakari Ailus
> Cc: Hans Verkuil
> Cc: Mauro Carvalho Chehab
> Signed-off-by: Akinobu Mita
> ---
> drivers/media/i2c/video-i2c.c | 140
> ++
On Mon, Sep 17, 2018 at 9:03 AM Akinobu Mita wrote:
>
> Use regmap for i2c register access. This simplifies register accesses and
> chooses suitable access commands based on the functionality that the
> adapter supports.
>
> Cc: Matt Ranostay
> Cc: Sakari Ailus
> Cc: H
on driver
> detach.
>
> Fixes: 5cebaac60974 ("media: video-i2c: add video-i2c driver")
> Cc: Matt Ranostay
> Cc: Sakari Ailus
> Cc: Hans Verkuil
> Cc: Mauro Carvalho Chehab
> Signed-off-by: Akinobu Mita
Acked-by: Matt Ranostay
> ---
> drivers/media/i2
PTR_ERR was making any pointer passed an error pointer, and should be
replaced with PTR_ERR_OR_ZERO which checks if is an actual error condition.
Signed-off-by: Matt Ranostay
---
drivers/media/i2c/video-i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c
On Wed, Jul 25, 2018 at 2:09 AM, Sakari Ailus wrote:
> On Tue, Jul 24, 2018 at 11:05:47PM -0700, Matt Ranostay wrote:
>> On Mon, Jul 23, 2018 at 4:35 AM, Sakari Ailus wrote:
>> > Hi Matt,
>> >
>> > On Sun, Jul 15, 2018 at 11:05:42PM -0700, Matt Ranostay wrote
On Mon, Jul 23, 2018 at 4:35 AM, Sakari Ailus wrote:
> Hi Matt,
>
> On Sun, Jul 15, 2018 at 11:05:42PM -0700, Matt Ranostay wrote:
>> Hello et all,
>>
>> So currently working with some thermal sensors that have coefficients
>> that needs to be passed back to use
isn't some is kludge of the close captioning, or just passing raw data
as another column line.
Datasheet:
https://www.melexis.com/en/product/MLX90640/Far-Infrared-Thermal-Sensor-Array
Thanks,
Matt
On Wed, Apr 18, 2018 at 1:03 AM, Sakari Ailus wrote:
> Hi Matt,
>
> Thanks for the update.
>
> On Fri, Apr 06, 2018 at 03:52:31PM -0700, Matt Ranostay wrote:
>> There are several thermal sensors that only have a low-speed bus
>> interface but output valid video data. Th
Slight poke on this since the merge window craziness should be over
also I stupidly forgot to CC people who had comments in the last
revision. *grin*
- Matt
On Fri, Apr 6, 2018 at 3:52 PM, Matt Ranostay
wrote:
> There are several thermal sensors that only have a low-speed bus
> interfa
* corrected a few over 80 column lines
* change DT check to generic dev_fwnode() call
Matt Ranostay (2):
media: dt-bindings: Add bindings for panasonic,amg88xx
media: video-i2c: add video-i2c driver
.../bindings/media/i2c/panasonic,amg88xx.txt | 19 +
MAINTAINERS
Define the device tree bindings for the panasonic,amg88xx i2c
video driver.
Cc: devicet...@vger.kernel.org
Reviewed-by: Rob Herring
Signed-off-by: Matt Ranostay
---
.../bindings/media/i2c/panasonic,amg88xx.txt | 19 +++
1 file changed, 19 insertions(+)
create mode
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Signed-off-by: Matt Ranostay
---
MAINTAINERS | 6 +
drivers/media/i2c/Kconfig | 13
Define the device tree bindings for the panasonic,amg88xx i2c
video driver.
Cc: devicet...@vger.kernel.org
Reviewed-by: Rob Herring
Signed-off-by: Matt Ranostay
---
.../bindings/media/i2c/panasonic,amg88xx.txt | 19 +++
1 file changed, 19 insertions(+)
create mode
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Signed-off-by: Matt Ranostay
---
MAINTAINERS | 6 +
drivers/media/i2c/Kconfig | 13
Kconfig documentation
* destroy mutexes on error path and module removal
* fixed MODULE_LICENSE from GPL to GPLv2
* changes some calls to list_last_entry() to avoid touching next pointer
* moved common code to a function from start/stop_streaming()
Matt Ranostay (2):
media: dt-bindings: Add
On Thu, Apr 05, 2018 at 10:32:04PM +0200, Daniel Vetter wrote:
> Pulling this out of the shadows again.
>
> We now also have xen-zcopy from Oleksandr and the hyper dmabuf stuff
> from Matt and Dongwong.
>
> At least from the intel side there seems to be the idea to just have
On Thu, Apr 5, 2018 at 12:39 AM, Sakari Ailus wrote:
> Hi Matt,
>
> Thanks for the patch. It's a very nicely written, small driver. :-)
>
> Please see more comments below.
>
> On Sat, Mar 31, 2018 at 05:59:26PM -0700, Matt Ranostay wrote:
>> There are several ther
On Sat, Mar 31, 2018 at 5:59 PM, Matt Ranostay
wrote:
> There are several thermal sensors that only have a low-speed bus
> interface but output valid video data. This patchset enables support
> for the AMG88xx "Grid-Eye" sensor family.
>
> Signed-off-by: Matt Ranostay
&g
:
* convert pointer from of_device_get_match_data() to long instead of int to
avoid compiler warning
Changes from v5:
* fix various issues with v4l2-compliance tool run
Matt Ranostay (2):
media: dt-bindings: Add bindings for panasonic,amg88xx
media: video-i2c: add video-i2c driver
.../bindings
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Signed-off-by: Matt Ranostay
---
MAINTAINERS | 6 +
drivers/media/i2c/Kconfig | 9
Define the device tree bindings for the panasonic,amg88xx i2c
video driver.
Cc: devicet...@vger.kernel.org
Reviewed-by: Rob Herring
Signed-off-by: Matt Ranostay
---
.../bindings/media/i2c/panasonic,amg88xx.txt | 19 +++
1 file changed, 19 insertions(+)
create mode
On Thu, Mar 22, 2018 at 3:28 PM, Hans Verkuil wrote:
> On 03/22/2018 06:46 AM, Matt Ranostay wrote:
>> On Mon, Mar 19, 2018 at 5:31 PM, Hans Verkuil wrote:
>>> On 03/16/2018 03:47 AM, Matt Ranostay wrote:
>>>> On Fri, Mar 9, 2018 at 10:26 AM, Matt Ranostay
>>
On Mon, Mar 19, 2018 at 5:31 PM, Hans Verkuil wrote:
> On 03/16/2018 03:47 AM, Matt Ranostay wrote:
>> On Fri, Mar 9, 2018 at 10:26 AM, Matt Ranostay
>> wrote:
>>> On Fri, Mar 9, 2018 at 4:45 AM, Hans Verkuil wrote:
>>>> Hi Matt,
>>>>
>&
On Fri, Mar 9, 2018 at 10:26 AM, Matt Ranostay
wrote:
> On Fri, Mar 9, 2018 at 4:45 AM, Hans Verkuil wrote:
>> Hi Matt,
>>
>> This is looking good. One request before I merge: please run the
>> 'v4l2-compliance -s -f' utility and post the result here.
>
On Fri, Mar 9, 2018 at 4:45 AM, Hans Verkuil wrote:
> Hi Matt,
>
> This is looking good. One request before I merge: please run the
> 'v4l2-compliance -s -f' utility and post the result here.
>
> I don't think I've asked you to do that before (or if I did, I
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Signed-off-by: Matt Ranostay
---
MAINTAINERS | 6 +
drivers/media/i2c/Kconfig | 9
:
* convert pointer from of_device_get_match_data() to long instead of int to
avoid compiler warning
Matt Ranostay (2):
media: dt-bindings: Add bindings for panasonic,amg88xx
media: video-i2c: add video-i2c driver
.../bindings/media/i2c/panasonic,amg88xx.txt | 19 +
MAINTAINERS
Define the device tree bindings for the panasonic,amg88xx i2c
video driver.
Cc: devicet...@vger.kernel.org
Reviewed-by: Rob Herring
Signed-off-by: Matt Ranostay
---
.../bindings/media/i2c/panasonic,amg88xx.txt | 19 +++
1 file changed, 19 insertions(+)
create mode
On Wed, Feb 28, 2018 at 8:22 PM, kbuild test robot wrote:
> Hi Matt,
>
> I love your patch! Perhaps something to improve:
>
> [auto build test WARNING on linuxtv-media/master]
> [also build test WARNING on v4.16-rc3 next-20180228]
> [if your patch is applied to the wrong git
Define the device tree bindings for the panasonic,amg88xx i2c
video driver.
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
Signed-off-by: Matt Ranostay
---
.../bindings/media/i2c/panasonic,amg88xx.txt | 19 +++
1 file changed, 19 insertions(+)
create mode 100644
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Cc: Luca Barbato
Cc: Laurent Pinchart
Signed-off-by: Matt Ranostay
---
MAINTAINERS | 6
build
Changes from v3:
* Add devicetree binding documents
* snprintf check added
* switched to per chip support based on devicetree or i2c client id
* add VB2_DMABUF to io_modes
* added entry to MAINTAINERS file switched to per chip support based on
devicetree or i2c client id
Matt Ranostay (2
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Cc: Luca Barbato
Cc: Laurent Pinchart
Signed-off-by: Matt Ranostay
---
Changes from v1:
* Switch to SPDX t
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Cc: Luca Barbato
Cc: Laurent Pinchart
Signed-off-by: Matt Ranostay
---
Changes from v1:
* Switch to SPDX t
On Thu, Feb 15, 2018 at 7:49 AM, Hans Verkuil wrote:
> Hi Matt,
>
> Here is a quick review. Apologies for the delay, it has been very busy for
> the last few weeks.
>
> On 13/01/18 04:57, Matt Ranostay wrote:
>> There are several thermal sensors that only have a low-sp
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Cc: Luca Barbato
Cc: Laurent Pinchart
Signed-off-by: Matt Ranostay
---
drivers/media/i2c/Kconfig | 9
On Fri, Jan 13, 2017 at 3:47 AM, Laurent Pinchart
wrote:
> Hi Matt,
>
> Thank you for the patch.
>
> On Friday 23 Dec 2016 19:04:26 Matt Ranostay wrote:
>> There are several thermal sensors that only have a low-speed bus
>> interface but output valid video data. Th
On Fri, Jan 13, 2017 at 2:22 AM, Laurent Pinchart
wrote:
> Hi Matt,
>
> On Thursday 12 Jan 2017 20:45:21 Matt Ranostay wrote:
>> On Sun, Jan 8, 2017 at 9:33 PM, Marek Vasut wrote:
>> > On 01/09/2017 06:17 AM, Matt Ranostay wrote:
>> >> Gentle ping on thi
On Sun, Jan 8, 2017 at 9:33 PM, Marek Vasut wrote:
> On 01/09/2017 06:17 AM, Matt Ranostay wrote:
>> Gentle ping on this! :)
>
> Just some high-level feedback ... You should use regmap instead. Also,
> calling a driver which is specific to a particular sensor (amg88x) by
> ge
Gentle ping on this! :)
Thanks,
Matt
> On Dec 23, 2016, at 19:04, Matt Ranostay wrote:
>
> There are several thermal sensors that only have a low-speed bus
> interface but output valid video data. This patchset enables support
> for the AMG88xx "Grid-Eye" sensor famil
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Cc: Attila Kinali
Cc: Marek Vasut
Cc: Luca Barbato
Cc: Laurent Pinchart
Signed-off-by: Matt Ranostay
-
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Cc: Attila Kinali
Cc: Marek Vasut
Cc: Luca Barbato
Cc: Laurent Pinchart
Signed-off-by: Matt Ranostay
-
On Wed, Nov 23, 2016 at 10:31 PM, Matt Ranostay
wrote:
> On Wed, Nov 23, 2016 at 8:30 AM, Laurent Pinchart
> wrote:
>> Hi Matt,
>>
>> Thank you for the patch.
>>
>> On Tuesday 22 Nov 2016 17:18:40 Matt Ranostay wrote:
>>> There are several t
On Wed, Nov 23, 2016 at 8:30 AM, Laurent Pinchart
wrote:
> Hi Matt,
>
> Thank you for the patch.
>
> On Tuesday 22 Nov 2016 17:18:40 Matt Ranostay wrote:
>> There are several thermal sensors that only have a low-speed bus
>> interface but output valid video data. Th
On Wed, Nov 23, 2016 at 8:30 AM, Laurent Pinchart
wrote:
> Hi Matt,
>
> Thank you for the patch.
>
> On Tuesday 22 Nov 2016 17:18:40 Matt Ranostay wrote:
>> There are several thermal sensors that only have a low-speed bus
>> interface but output valid video data. Th
On Wed, Nov 23, 2016 at 8:30 AM, Laurent Pinchart
wrote:
> Hi Matt,
>
> Thank you for the patch.
>
> On Tuesday 22 Nov 2016 17:18:40 Matt Ranostay wrote:
>> There are several thermal sensors that only have a low-speed bus
>> interface but output valid video data. Th
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Cc: Attila Kinali
Cc: Marek Vasut
Cc: Luca Barbato
Signed-off-by: Matt Ranostay
---
Changes from v1:
On Mon, Nov 7, 2016 at 11:03 PM, Ozgur wrote:
> Dear Matt;
>
> I think the "inux/slab.h" line is incorrect and I fixed to "linux/slab.h", I
> tested. Success now.
>
> Regards,
>
> ~ Ozgur
>
>>> -#include
>>> +#include
Gah wond
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Cc: Attila Kinali
Cc: Marek Vasut
Cc: Luca Barbato
Signed-off-by: Matt Ranostay
---
Changes from v1:
On Sun, Nov 6, 2016 at 5:21 PM, Matt Ranostay wrote:
> There are several thermal sensors that only have a low-speed bus
> interface but output valid video data. This patchset enables support
> for the AMG88xx "Grid-Eye" sensor family.
>
> Cc: Attila Kinali
> Cc: Mar
There are several thermal sensors that only have a low-speed bus
interface but output valid video data. This patchset enables support
for the AMG88xx "Grid-Eye" sensor family.
Cc: Attila Kinali
Cc: Marek Vasut
Cc: Luca Barbato
Signed-off-by: Matt Ranostay
---
drivers/media/i
On Thu, Nov 3, 2016 at 8:11 AM, Luca Barbato wrote:
> On 03/11/2016 14:21, Attila Kinali wrote:
>> On Wed, 2 Nov 2016 23:10:41 -0700
>> Matt Ranostay wrote:
>>
>>>
>>> So does anyone know of any software that is using V4L2_PIX_FMT_Y12
>>> current
On Fri, Oct 28, 2016 at 7:59 PM, Matt Ranostay wrote:
> On Fri, Oct 28, 2016 at 2:53 PM, Hans Verkuil wrote:
>> Hi Matt,
>>
>> On 28/10/16 22:14, Matt Ranostay wrote:
>>>
>>> So want to toss a few thoughts on adding support for thermopile
>>> devi
On Fri, Oct 28, 2016 at 2:53 PM, Hans Verkuil wrote:
> Hi Matt,
>
> On 28/10/16 22:14, Matt Ranostay wrote:
>>
>> So want to toss a few thoughts on adding support for thermopile
>> devices (could be used for FLIR Lepton as well) that output pixel
>> data.
&
On Fri, Oct 28, 2016 at 1:30 PM, Devin Heitmueller
wrote:
> Hi Matt,
>
>> Need some input for the video pixel data types, which the device we
>> are using (see datasheet links below) is outputting pixel data in
>> little endian 16-bit of which a 12-bits signed value i
On Fri, Oct 28, 2016 at 1:40 PM, Marek Vasut wrote:
> On 10/28/2016 10:30 PM, Devin Heitmueller wrote:
>> Hi Matt,
>>
>>> Need some input for the video pixel data types, which the device we
>>> are using (see datasheet links below) is outputting pixel data in
&g
edia.digikey.com/pdf/Data%20Sheets/Panasonic%20Sensors%20PDFs/Grid-EYE_AMG88.pdf
Datasheet:
https://eewiki.net/download/attachments/13599167/Grid-EYE%20SPECIFICATIONS%28Reference%29.pdf?version=1&modificationDate=1380660426690&api=v2
Thanks,
Matt
--
To unsubscribe from this list: send the line
From: Matt DeVillier
Change the I/O endpoint handling of the mceusb driver to respect the endpoint
type reported by device (bulk/interrupt), rather than treating all endpoints
as type interrupt, which breaks devices using bulk endpoints when connected
to a xhci controller. Accordingly
From: Matt DeVillier
Change the I/O endpoint handling of the mceusb driver to respect the endpoint
type reported by device (bulk/interrupt), rather than treating all endpoints
as type interrupt, which breaks devices using bulk endpoints when connected
to a xhci controller. Accordingly
From: Matt DeVillier
Change the I/O endpoint handling of the mceusb driver to respect the
endpoint type reported by device (bulk/interrupt), rather than treating
all endpoints as type interrupt, which breaks devices using bulk
endpoints when connected to a xhci controller. Accordingly
it is best to wait until someone with such a device cares to test
it.
Thanks,
Matt
-Original Message-
From: Hans Verkuil [mailto:hverk...@xs4all.nl]
Sent: Wednesday, March 06, 2013 12:56 PM
To: gomb...@gmail.com
Cc: linux-media@vger.kernel.org
Subject: Re: cx231xx : Add support for
necessary (in static in cx231xx_init_dev and static int cx231xx_usb_probe), so
those have been also been removed.
Signed-off-by: Matt Gomboc
--
drivers/media/usb/cx231xx/cx231xx-avcore.c | 2 ++
drivers/media/usb/cx231xx/cx231xx-cards.c | 35 ++
drivers/media/usb/cx231xx
x2311.h and the many recent patches by
Hans Verkuil, this may take some further working to align it with a moving
target.
If you desire any further information, let me know. Thanks.
Matt
OTG102.patch
Description: Binary data
OTG102.patch
Description: Binary data
ill enable debug and poke around a bit more, but I'm far from a
driver writer.
Thanks,
Matt
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
ill enable debug and poke around a bit more, but I'm far from a
driver writer.
Thanks,
Matt
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
accomplish this with linux but all of my reasearch hasn't really helped
so I'm reaching out to you. Has anyone ever done this? or know of any
good reference sites for this?
Any info would be greatly appreciated.
Thanks again,
Matt Bernardi
--
To unsubscribe from this list: send the line &q
On 10:30 Wed 22 Jun , matt mooney wrote:
> On 20:02 Wed 22 Jun , Kirill Smelkov wrote:
> > There are cases, when 80% max isochronous bandwidth is too limiting.
> >
> > For example I have two USB video capture cards which stream uncompressed
> > video, and to st
On 20:02 Wed 22 Jun , Kirill Smelkov wrote:
> There are cases, when 80% max isochronous bandwidth is too limiting.
>
> For example I have two USB video capture cards which stream uncompressed
> video, and to stream full NTSC + PAL videos we'd need
>
> NTSC 640x480 YUV422 @30fps ~17.6
tation source for the APIs?
Yes,
My summer of code project's purpose was to create something of a
tutorial for writing a KMS driver. The code, split out into something
like 15 step-by-step patches, and accompanying documentation are
available from Google's website.
http://code
On 1/02/2011 6:55 a.m., Igor M. Liplianin wrote:
В сообщении от 31 января 2011 11:33:54 автор Matt Vickers написал:
On 23/10/2010 10:20 p.m., Igor M. Liplianin wrote:
В сообщении от 10 марта 2010 14:15:49 автор Hendrik Skarpeid написал:
Igor M. Liplianin skrev:
On 3 марта 2010 18:42:42
://www.hongsun.biz/ProView.asp?ID=90
Scanning doesn't appear to give me any results. Should this be working?
Anything I can do to test the card out for you?
Cheers,
Matt.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On 18:27 Tue 05 Oct , T Dent wrote:
> On 10/5/10, Sam Ravnborg wrote:
> > On Sun, Sep 26, 2010 at 02:00:47PM -0700, matt mooney wrote:
> >> I have been doing cleanup of makefiles, namely replacing the older style
> >> compilation flag variables with the newer
On 12:24 Tue 05 Oct , matt mooney wrote:
> On 16:29 Tue 05 Oct , Sam Ravnborg wrote:
> > On Sun, Sep 26, 2010 at 02:00:47PM -0700, matt mooney wrote:
> > > I have been doing cleanup of makefiles, namely replacing the older style
> > > compilation flag variables
On 16:29 Tue 05 Oct , Sam Ravnborg wrote:
> On Sun, Sep 26, 2010 at 02:00:47PM -0700, matt mooney wrote:
> > I have been doing cleanup of makefiles, namely replacing the older style
> > compilation flag variables with the newer style. While doing this, I
> > noticed
1 - 100 of 107 matches
Mail list logo
