True, the ordering is not exactly the same everytime. One will need to
provide PCI Bus related info also to a practical udev configuration to
get things sorted out in a sane way, rather than anything else.
At least in Mandriva, the order and naming of network adapters are
handled by using a thi
Am Freitag, den 15.01.2010, 17:27 -0800 schrieb Trent Piepho:
> On Sat, 16 Jan 2010, hermann pitton wrote:
> > Am Dienstag, den 12.01.2010, 04:13 +0100 schrieb hermann pitton:
> > > > gpio-sysfs creates
> > > > /sys/class/gpio/export
> > > > /sys/class/gpio/import
> > > > but no gpio entri
Mauro Carvalho Chehab wrote:
> Oliver Endriss wrote:
> > Manu Abraham wrote:
> >> On Mon, Jan 11, 2010 at 12:17 AM, Manu Abraham
> >> wrote:
> >>> Mauro,
> >>>
> >>>
> >>> Following the changesets 13830 - 13894 from my earlier pull request,
> >> Correction, 13880 - 13894 inclusive of both.
> >>
>
Hi,
I've got reworked changes for the IR for the TeVii S470 and the HVR-1250
at
http://linuxtv.org/hg/~awalls/cx23885-ir2
Thanks to loaner HVR-1250 hardware from Devin Heitmueller,
I've solved the infinite interrupt problem with the CX23885 AV core and
have reworked the change set agains
Manu Abraham wrote:
> On Mon, Jan 11, 2010 at 12:17 AM, Manu Abraham wrote:
> > Mauro,
> >
> >
> > Following the changesets 13830 - 13894 from my earlier pull request,
>
> Correction, 13880 - 13894 inclusive of both.
>
> >
> > Please pull the following changeset as well
> >
> >
> > http://jusst.
Oliver Endriss wrote:
> Manu Abraham wrote:
>> On Mon, Jan 11, 2010 at 12:17 AM, Manu Abraham
>> wrote:
>>> Mauro,
>>>
>>>
>>> Following the changesets 13830 - 13894 from my earlier pull request,
>> Correction, 13880 - 13894 inclusive of both.
>>
>>> Please pull the following changeset as well
>>
On Sat, 16 Jan 2010 02:49:52 +, wrote:
> Ah, I see. The whole thing is a tuner, and the label that I thought
said
> "ERIT" actually says "SERIT". Yes, it does have a label on it, I should
> have given you that up front. I had searched for it on the internet and
> decided that it didn't mea
Paul wrote:
> Is it likely that there is a tuner under the card labelled "ERIT"? To
> take it off I have to unsolder some stuff - I can do that, but I reckon
> it's only 50% chance the card will work again when I put it back
together -
> my soldering isn't so good.
Igor wrote:
> No need to unsold
On Sat, 16 Jan 2010, hermann pitton wrote:
> Am Dienstag, den 12.01.2010, 04:13 +0100 schrieb hermann pitton:
> > > gpio-sysfs creates
> > > /sys/class/gpio/export
> > > /sys/class/gpio/import
> > > but no gpio entries so far.
You have to explictly export the GPIO lines to get them to appe
Hi to all,
I'm trying to use my Dikom DK300, my old notebook and an external
monitor to create a media centre (I'm mostly interested in TV and TV
recording).
The problem is that, even if I have managed to have the device working
with the following patch, I can't still use the IR remote contro
Am Dienstag, den 12.01.2010, 04:13 +0100 schrieb hermann pitton:
> Hi!
>
> Am Montag, den 11.01.2010, 11:59 -0700 schrieb Gordon Smith:
> > I need to bit twiddle saa7134 gpio pins from userspace.
> > To use gpio-sysfs, I need a "GPIO number" to export each pin, but I
> > do not know how to find
Using kernel 2.6.30.10-105.fc11.x86_64, sasc-ng-0.0.2-77.x86_64 and
the mantis driver from
http://mercurial.intuxication.org/hg/s2-liplianin, I get the following
when I boot my machine (TerraTec Cinergy C HD DVB-C, VP-2040 PCI
DVB-C:
sysfs: cannot create duplicate filename '/devices/virtual/irr
On 16 января 2010 01:14:49 pau...@planar.id.au wrote:
> On 15 января 2010 11:15:26 pau...@planar.id.au wrote:
> > I bought a DVB-S card to attach to my mythtv setup. I knew it was
>
> perhaps
>
> > not going to work, and I only spent $15 on it. However, based on the
>
> info
>
> > the guy on eBay
Am Freitag, den 15.01.2010, 15:28 -0800 schrieb Chuck McCrobie:
> Wow! I see I need a flame retardant suit here after the last few emails from
> the list... but to the point:
Maybe some fish is around ;)
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body
On 16 января 2010 01:14:49 pau...@planar.id.au wrote:
> On 15 января 2010 11:15:26 pau...@planar.id.au wrote:
> > I bought a DVB-S card to attach to my mythtv setup. I knew it was
>
> perhaps
>
> > not going to work, and I only spent $15 on it. However, based on the
>
> info
>
> > the guy on eBay
Wow! I see I need a flame retardant suit here after the last few emails from
the list... but to the point:
I have an HP HDX 18t with a PCI-E TV Card. Looks to be an Avermedia A317 based
on the Windows .inf file and the PCI vendor/product and subsystem
vendor/product ids.
I've started to kic
Devin Heitmueller wrote:
> Rather than making any "announcement", I would strongly encourage you
> to consider actually soliciting the feedback on your proposed approach
> from all of the developers who are actually contributing the code to
> the project.
The point here is as simple as I don't ha
Am Samstag, den 16.01.2010, 00:00 +0100 schrieb Oliver Endriss:
> Devin Heitmueller wrote:
> > On Thu, Jan 14, 2010 at 11:01 AM, Andreas Besse wrote:
> > > yes if there are different drivers I already observed the behaviour that
> > > the ordering gets flipped after reboot.
> > >
> > > But if I a
On 15 января 2010 11:15:26 pau...@planar.id.au wrote:
> I bought a DVB-S card to attach to my mythtv setup. I knew it was
perhaps
> not going to work, and I only spent $15 on it. However, based on the
info
> the guy on eBay provided, it had a pci address of 195d:1105, which I
could
> see some peo
Am Freitag, den 15.01.2010, 17:22 -0500 schrieb Devin Heitmueller:
> On Fri, Jan 15, 2010 at 3:00 PM, Mauro Carvalho Chehab
> wrote:
> >> I've tried to tactfully point this out in the past, but PLEASE STOP
> >> USING THE TRUNK AS YOUR PERSONAL DEVELOPMENT SANDBOX. These changes
> >> should have
On Sat, Jan 16, 2010 at 3:00 AM, Oliver Endriss wrote:
> Devin Heitmueller wrote:
>> On Thu, Jan 14, 2010 at 11:01 AM, Andreas Besse wrote:
>> > yes if there are different drivers I already observed the behaviour that
>> > the ordering gets flipped after reboot.
>> >
>> > But if I assume, that th
On Fri, Jan 15, 2010 at 6:00 PM, Oliver Endriss wrote:
>> I believe your assumption is incorrect. I believe the enumeration
>> order is not deterministic even for multiple instances of the same
>> driver. It is not uncommon to hear mythtv users complain that "I have
>> two PVR-150 cards installe
Devin Heitmueller wrote:
> On Thu, Jan 14, 2010 at 11:01 AM, Andreas Besse wrote:
> > yes if there are different drivers I already observed the behaviour that
> > the ordering gets flipped after reboot.
> >
> > But if I assume, that there is only *one* driver that is loaded (e.g.
> > budget_av) fo
On Fri, 2010-01-15 at 17:47 -0200, Mauro Carvalho Chehab wrote:
> Andy Walls wrote:
> > Mauro,
> >
> > At
> >
> > http://linuxtv.org/hg/~awalls/cx23885-ir2
> >
> > I have a change checked in to fix the v4l-dvb compilation breakage for
> > kernels less than 2.6.33 cause by the kfifo API change.
On Fri, Jan 15, 2010 at 3:00 PM, Mauro Carvalho Chehab
wrote:
>> I've tried to tactfully point this out in the past, but PLEASE STOP
>> USING THE TRUNK AS YOUR PERSONAL DEVELOPMENT SANDBOX. These changes
>> should have gone into a branch, and you should have solicited testers
>> for that branch b
Devin Heitmueller wrote:
> On Wed, Jan 13, 2010 at 9:00 AM, Mauro Carvalho Chehab
> wrote:
>> Michael Krufky wrote:
>>
>>> The same tree is also available using http instead of https:
>>>
>>> http://www.kernellabs.com/hg/~dheitmueller/em28xx-pal-vbi-2
>>>
>>> This should work for you without issue
Andy Walls wrote:
> Mauro,
>
> At
>
> http://linuxtv.org/hg/~awalls/cx23885-ir2
>
> I have a change checked in to fix the v4l-dvb compilation breakage for
> kernels less than 2.6.33 cause by the kfifo API change. I have fixed
> both the cx23885 and meye driver so they compile again for older
>
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Fri Jan 15 19:00:03 CET 2010
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13972:725c07a70453
gcc version: gcc (
On Fri, 15 Jan 2010 13:27:56 +0100 Christoph Egger wrote:
> Hi all!
>
> As part of the VAMOS[0] research project at the University of
> Erlangen we're checking referential integrity between kernel KConfig
> options and in-code Conditional blocks.
>
> While probably not strictly a int
Mauro,
I know you are busy, but this patch is sitting too long for merge
and require your service. Could you at least respond to my email with
your plan so that I can work on the next patch set for your merge.
Thanks and regards,
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
G
On Friday 15 January 2010, Roel Kluin wrote:
> vi drivers/media/video/ivtv/ivtv-yuv.c +971
>
> and note that `args->dst.left' is assigned both to
> nf->tru_x and nf->dst_x, is that ok?
It's fine. dst_x is used to set a hardware register and may be changed in
ivtv_yuv_window_setup()
tru_x is nev
On 15 января 2010 11:15:26 pau...@planar.id.au wrote:
> I bought a DVB-S card to attach to my mythtv setup. I knew it was perhaps
> not going to work, and I only spent $15 on it. However, based on the info
> the guy on eBay provided, it had a pci address of 195d:1105, which I could
> see some peo
Hi,
Is that possible to have user mapping cached in Memory Mapping mode ?
This means buffer allocated by mmap in userspace, will have cache
support, and it will be faster to work on it.
But how the cache coherency can be done ?
For a camera we should :
- invalidate cache before dma operation (t
vi drivers/media/video/ivtv/ivtv-yuv.c +971
and note that `args->dst.left' is assigned both to
nf->tru_x and nf->dst_x, is that ok?
Roel
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://v
Hello Andy,
On 01/15/2010 10:00 AM, Andy Walls wrote:
Mauro,
At
http://linuxtv.org/hg/~awalls/cx23885-ir2
I have a change checked in to fix the v4l-dvb compilation breakage for
kernels less than 2.6.33 cause by the kfifo API change. I have fixed
both the cx23885 and meye driver so they compi
Hi all!
As part of the VAMOS[0] research project at the University of
Erlangen we're checking referential integrity between kernel KConfig
options and in-code Conditional blocks.
While probably not strictly a integrity violation (as
FB_SOFT_CURSOR can still be set as it is once me
Hi all!
As part of the VAMOS[0] research project at the University of
Erlangen we're checking referential integrity between kernel KConfig
options and in-code Conditional blocks.
By this we discovered the config Option DVB_DIBCOM_DEBUG,
which was dropped while removing the dibusb
Mauro,
At
http://linuxtv.org/hg/~awalls/cx23885-ir2
I have a change checked in to fix the v4l-dvb compilation breakage for
kernels less than 2.6.33 cause by the kfifo API change. I have fixed
both the cx23885 and meye driver so they compile again for older
kernels.
All the changes in this rep
I have bug-fix (tm6000.patch) my first problem, so that it loads the
tuner and demodulator (message). But I cannot find digital channels. It
was wrong with the tuner (xc3028) or demodulator (zl10353)? Under
windows xp it found digital channels (region Germany Berlin).
--
Stefan Ringel
diff --g
I bought a DVB-S card to attach to my mythtv setup. I knew it was perhaps
not going to work, and I only spent $15 on it. However, based on the info
the guy on eBay provided, it had a pci address of 195d:1105, which I could
see some people had cards that were working.
The card itself is a no-name
Aguirre, Sergio wrote:
-Original Message-
From: Michael Trimarchi [mailto:mich...@panicking.kicks-ass.org]
Sent: Thursday, January 14, 2010 11:39 AM
To: Aguirre, Sergio
Cc: linux-media@vger.kernel.org
Subject: Re: omap34xxcam question?
Aguirre, Sergio wrote:
-Original Message-
41 matches
Mail list logo
