hi,Mauro:
thanks for replying.
i am not sure the dtv api can be used in my project.because cmmb's
protocol is different to dmb :(
in Windows, we download firmware using windows driver,config fx2 as bulk
transfer,and read the TS stream,finally decode it and display.
I also read this post: "http:
On Tue, Sep 22, 2009 at 7:08 AM, hermann pitton wrote:
>
> All fine.
>
> But you do cut off parts of my messages.
>
> I would like to ask you to exercise a breakage, not only for stuff six
> years back, but on recent S2 API.
>
at this time there are definitely no DVB applications available which
Am Dienstag, den 22.09.2009, 05:31 +0200 schrieb Markus Rechberger:
> On Tue, Sep 22, 2009 at 4:00 AM, hermann pitton
> wrote:
> > Hi Markus,
> >
> > Am Montag, den 21.09.2009, 12:02 +0200 schrieb Markus Rechberger:
> >>
> >> in dvb-frontend.c:
> >>
> >> if(cmd == FE_GET_PROP
Hi Liu,
Em Tue, 22 Sep 2009 10:47:18 +0800
liu.yao...@zte.com.cn escreveu:
> hi,all:
> i have a cmmb usb card,based on fx2 lp.my kernel version is 2.6.24.7.i
> already read some source in /driver/usb/misc and
> /driver/media/dvb/dvb-usb, and still have no idea how to write the driver
> .coul
On Tue, Sep 22, 2009 at 4:00 AM, hermann pitton wrote:
> Hi Markus,
>
> Am Montag, den 21.09.2009, 12:02 +0200 schrieb Markus Rechberger:
>>
>> in dvb-frontend.c:
>>
>> if(cmd == FE_GET_PROPERTY) {
>>
>> tvps = (struct dtv_properties __user *)parg;
>>
hi,all:
i have a cmmb usb card,based on fx2 lp.my kernel version is 2.6.24.7.i
already read some source in /driver/usb/misc and
/driver/media/dvb/dvb-usb, and still have no idea how to write the driver
.could you show me how to do it?
maybe i just want to read/write cy7c68013 corrently,and not
Version 2
From c2c100652ed74d91ade7fdfb2a22d607ff43acf2 Mon Sep 17 00:00:00 2001
From: David Ellingsworth
Date: Mon, 21 Sep 2009 22:17:05 -0400
Subject: [PATCH 08/14] mr800: fix potential use after free
Signed-off-by: David Ellingsworth
---
drivers/media/radio/radio-mr800.c |2 +-
1 files c
Hi Markus,
Am Montag, den 21.09.2009, 12:02 +0200 schrieb Markus Rechberger:
>
> in dvb-frontend.c:
>
> if(cmd == FE_GET_PROPERTY) {
>
> tvps = (struct dtv_properties __user *)parg;
> dprintk("%s() properties.num = %d\n", __func__, tvps->num);
On Mon, Sep 21, 2009 at 8:03 PM, Alexey Klimov wrote:
> Hello, David
>
> On Mon, Sep 14, 2009 at 11:09 PM, Alexey Klimov
> wrote:
>> Hello David,
>>
>> On Sun, Sep 13, 2009 at 7:22 AM, David Ellingsworth
>> wrote:
>>> What follow is a series of patches to clean up the radio-mr800 driver. I
>>>
Em Tue, 22 Sep 2009 01:37:51 +0300
"Aleksandr V. Piskunov" escreveu:
> Is xc2028 tuner able to autodetect/handle different sound carrier standards
> without being spoon-fed precise input system information using module param
> or ioctl?
>
> Got an ivtv board here (AverTV MCE 116) with xc2028 and
Hei Mauro,
Please pull from http://linuxtv.org/hg/~anttip/af9015/
for the following:
af9015: add USB ID for KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)
af9015: fix few typos
af9015: add LeadTek Y04G0051 remote buttons
af9015: add MSI DIGIVOX mini III remote
af9015: enable remote polling whe
Hello, David
On Mon, Sep 14, 2009 at 11:09 PM, Alexey Klimov wrote:
> Hello David,
>
> On Sun, Sep 13, 2009 at 7:22 AM, David Ellingsworth
> wrote:
>> What follow is a series of patches to clean up the radio-mr800 driver. I
>> do _not_ have access to this device so these patches need to be teste
Em Mon, 21 Sep 2009 20:23:45 +0200
Ingo Molnar escreveu:
>
> * Mauro Carvalho Chehab wrote:
>
> > This series also contains several new drivers:
> >
> >- new driver for NXP saa7164;
>
> -tip testing found that an allyesconfig build buglet found its way into
> this driver - find the fix
Is xc2028 tuner able to autodetect/handle different sound carrier standards
without being spoon-fed precise input system information using module param
or ioctl?
Got an ivtv board here (AverTV MCE 116) with xc2028 and cx25843.
When I specify a generic standard using 'v4l2-ctl -s pal', xc2028 load
On Mon, Sep 21, 2009 at 6:15 PM, Uros Vampl wrote:
> I tried arecord/aplay and sox with tvtime, and also mplayer (which
> has
> built-in audio support). I know about these tricks, I've used them
> successfully with Markus' em28xx-new driver. But with v4l-dvb it's as I
> said, audio is there but it
On 21.09.09 16:49, Devin Heitmueller wrote:
> On Mon, Sep 21, 2009 at 4:44 PM, Uros Vampl wrote:
> > Hello.
> >
> > Partial success. With the attached patch, DVB works. But I have no idea
> > how to get analog audio working correctly. Any help would be
> > appreciated.
> >
> > Regards,
> > Uroš
>
On Mon, Sep 21, 2009 at 4:44 PM, Uros Vampl wrote:
> Hello.
>
> Partial success. With the attached patch, DVB works. But I have no idea
> how to get analog audio working correctly. Any help would be
> appreciated.
>
> Regards,
> Uroš
Hello Uroš,
Sorry I somehow missed your previous email. I hav
Hello.
Partial success. With the attached patch, DVB works. But I have no idea
how to get analog audio working correctly. Any help would be
appreciated.
Regards,
Uroš
On 13.09.09 21:31, Uros Vampl wrote:
> Hello.
>
> I have the Terratec Cinergy Hybrid T XS USB (em2882) - usb-id 0ccd:005e.
Russell King - ARM Linux wrote:
> Don't blame me for these delays - it's not my choice to impose such
> delays. I'd really like to fix those broken platforms right now. I
> just can't do so without causing additional delays for other issues.
> Blame Linus for imposing the "max one pull a week" ru
On Mon, Sep 21, 2009 at 09:19:46PM +0200, Guennadi Liakhovetski wrote:
> On Fri, 18 Sep 2009, Russell King - ARM Linux wrote:
>
> > On Fri, Sep 18, 2009 at 08:43:47AM +0200, Matej Kenda wrote:
> > > On Thu, 2009-09-10 at 19:46 +0800, Eric Miao wrote:
> > > > Here's the preview of request-pull resu
On Mon, Sep 21, 2009 at 3:58 PM, MarSarK wrote:
> Dne Po 21. září 2009 21:47:04 jste napsal(a): > On Mon, Sep 21, 2009 at 3:34
> PM, MarSarK wrote:
>> > hi, my brand new Gigabyte U8000-RG USB tv oops kernel.
>> >
>> > I have tried kernels from 2.6.27 to 2.6.31 everytime with same result
>> > (als
Dne Po 21. září 2009 21:47:04 jste napsal(a): > On Mon, Sep 21, 2009 at 3:34
PM, MarSarK wrote:
> > hi, my brand new Gigabyte U8000-RG USB tv oops kernel.
> >
> > I have tried kernels from 2.6.27 to 2.6.31 everytime with same result
> > (also at my notebook).
> >
> > uname -a:
> > Linux vertigo 2
On Mon, Sep 21, 2009 at 3:34 PM, MarSarK wrote:
> hi, my brand new Gigabyte U8000-RG USB tv oops kernel.
>
> I have tried kernels from 2.6.27 to 2.6.31 everytime with same result (also at
> my notebook).
>
> uname -a:
> Linux vertigo 2.6.31-gentoo #2 SMP PREEMPT Mon Sep 14 20:20:59 CEST 2009 i686
hi, my brand new Gigabyte U8000-RG USB tv oops kernel.
I have tried kernels from 2.6.27 to 2.6.31 everytime with same result (also at
my notebook).
uname -a:
Linux vertigo 2.6.31-gentoo #2 SMP PREEMPT Mon Sep 14 20:20:59 CEST 2009 i686
Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU
On Mon, Sep 21, 2009 at 3:26 PM, MarSarK wrote:
> hi, my brand new Gigabyte U8000-RG USB tv oops kernel.
>
> I have tried kernels from 2.6.27 to 2.6.31 everytime with same result (also at
> my notebook).
>
> uname -a:
> Linux vertigo 2.6.31-gentoo #2 SMP PREEMPT Mon Sep 14 20:20:59 CEST 2009 i686
On Fri, 18 Sep 2009, Russell King - ARM Linux wrote:
> On Fri, Sep 18, 2009 at 08:43:47AM +0200, Matej Kenda wrote:
> > On Thu, 2009-09-10 at 19:46 +0800, Eric Miao wrote:
> > > Here's the preview of request-pull result, please let me know if there
> > > is anything missed, thanks.
> > >
> > > UR
On Sat, Sep 19, 2009 at 4:57 AM, Hans Verkuil wrote:
> On Friday 18 September 2009 06:40:34 Devin Heitmueller wrote:
>> Hello Hans,
>>
>> If you can find a few minutes, please take a look at the following
>> tree, where I added initial support for including the ALSA devices in
>> the MC enumeratio
On Mon, Sep 21, 2009 at 04:31:19PM +0200, Roman wrote:
> Hi Antti,
>
> Am Monday 21 September 2009 16:19:37 schrieb Antti Palosaari:
> > > Here is the output of dmesg after reloading the module:
> > > #--
> > > af9015_usb_probe: interface:0
> > > af9015_read_config: IR mode:4
> >
> > IR mode 4 dis
* Mauro Carvalho Chehab wrote:
> This series also contains several new drivers:
>
>- new driver for NXP saa7164;
-tip testing found that an allyesconfig build buglet found its way into
this driver - find the fix below.
Thanks,
Ingo
->
>From 67a0d8c7dfdf2de72
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Mon Sep 21 19:00:03 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13038:29e4ba1a09bc
gcc version: gcc
Hi Mauro,
please pull from:
http://kernellabs.com/hg/~pboettcher/v4l-dvb/
for
DIB0700: fix-up USB device ID for Terratec/Leadtek
dib8000: SNR in 10th of dB
Both changesets should go for 2.6.32.
thanks,
--
Patrick Boettcher - Kernel Labs
http://www.kernellabs.com/
--
To unsubscribe from this
Mauro:
You can also directly pull this from:
http://linuxtv.org/hg/~mcisely/bttv-patches/
Again, another longer-than usual commit description here. Same reason
as before. This bug is a little less subtle than the other one - and
the patch is even smaller (one character).
-Mike
# HG cha
Mauro:
You can also directly pull this from:
http://linuxtv.org/hg/~mcisely/bttv-patches/
Sorry about the excessively long commit description, but I felt it
important to fully explain this somewhat subtle problem for what is
otherwise a mature driver. The actual patch is tiny.
-Mike
# H
George Joseph wrote:
> Thanks Andreas, That answers my question. I am using a tree I checkd out 3
> months ago. I used the DEMUX_SET_SOURCE API to set the ts feed to the
> tuner. Is this explicity done on Linux DVB 3?
By default, all demux devices are connected to the first frontend slot
of the DM
Thanks Andreas, That answers my question. I am using a tree I checkd out 3
months ago. I used the DEMUX_SET_SOURCE API to set the ts feed to the
tuner. Is this explicity done on Linux DVB 3?
Thanks,
Warm regs,
George.
> Hello George,
>
> demux0-3 represent different TS inputs. You can open each
Hello Laurent,
We have been developing quite simmilar solution for Samsung SoCs multimedia
drivers that the one mentioned in this RFC.
Our solution bases on the global buffer manager that provides buffers
(contiguous in physical memory) to user applications. Then the application can
pass the b
Hello George,
demux0-3 represent different TS inputs. You can open each demux device
multiple times. The 128 PID filters are shared between the four devices.
Regards,
Andreas
George Joseph wrote:
> Hello All,
>
> I am new to the list. I am currently working on a dm7025 platform and
> would lik
Hi Antti,
Am Monday 21 September 2009 16:19:37 schrieb Antti Palosaari:
> > Here is the output of dmesg after reloading the module:
> > #--
> > af9015_usb_probe: interface:0
> > af9015_read_config: IR mode:4
>
> IR mode 4 disables it. I have strong feeling it should mean "polling"...
> Could you c
Roman wrote:
Am Monday 21 September 2009 16:00:45 schrieb Antti Palosaari:
For reason or the other there is no any mention about remote polling.
Could you enable debug=3 to see what eeprom value is set to remote?
rmmod dvb-usb-af9015; modprobe dvb-usb-af9015 debug=3;
Antti
Here is the output
Hello All,
I am new to the list. I am currently working on a dm7025 platform and
would like to know if there is a possibillity to use the 128 pid filters
on the xilleon 226. currently I see only /dev/dvb/adaptor0/demux0-3 in my
device directory - i,e; at a point in time I can use only 4 tpid filt
Am Monday 21 September 2009 16:00:45 schrieb Antti Palosaari:
> For reason or the other there is no any mention about remote polling.
> Could you enable debug=3 to see what eeprom value is set to remote?
> rmmod dvb-usb-af9015; modprobe dvb-usb-af9015 debug=3;
>
> Antti
Here is the output of dmesg
Roman wrote:
Am Monday 21 September 2009 14:35:53 schrieb Antti Palosaari:
On 09/21/2009 02:51 PM, Aleksandr V. Piskunov wrote:
Just grab that patch and apply it to the current vl4-dvb, no need to mess
with old repository.
http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/raw-rev/914ded6d921
Am Monday 21 September 2009 14:35:53 schrieb Antti Palosaari:
> On 09/21/2009 02:51 PM, Aleksandr V. Piskunov wrote:
> > Just grab that patch and apply it to the current vl4-dvb, no need to mess
> > with old repository.
> > http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/raw-rev/914ded6d921d
>
On 9/19/09 10:20 PM, Andy Walls wrote:
Steve,
I've finally have a working implementation of the the HVR-1850 IR
receiver and the grey Hauppauge RC-5 remote with in kernel (non-LIRC) IR
input to key press events.
If you feel adventurous, give it a try for testing the IR receiver:
http://www.lin
On 09/21/2009 02:51 PM, Aleksandr V. Piskunov wrote:
Just grab that patch and apply it to the current vl4-dvb, no need to mess
with old repository.
http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/raw-rev/914ded6d921d
With this patch remote will not work most likely. But after adding that
Just grab that patch and apply it to the current vl4-dvb, no need to mess
with old repository.
http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/raw-rev/914ded6d921d
Now if the current tree doesn't compile, thats another issue, probably
something with kernel headers, etc.
Actually thats intere
Em Sat, 19 Sep 2009 01:49:30 -0300
Mauro Carvalho Chehab escreveu:
> Linus,
>
> Please pull from:
>
> ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
> for_linus
>
> For the second (and final) part of new stuff for kernel 2.6.31.
In time, I forgot to increment
Hi,
thx for the tip, i jusst tested it on Windows 7 and i was amazed
Not only the remote worked perfectly out of the box, also the software used
(some media-center from ArcSoft), worked flawless. (I last used a Hauppauge
TV-Card about 2 years ago on windows).
One thing to note is the channel
CityK wrote:
Simon Kenyon wrote:
i realise that this is a bit [OT]
but does anyone know of a (linux supported) analog PAL sat card?
there are still some broadcasts on astra 19.2E
Hi Simon,
Not at all off topic. I can think of two ancient TechniSat PCI cards
that you might be able to
in dvb-frontend.c:
if(cmd == FE_GET_PROPERTY) {
tvps = (struct dtv_properties __user *)parg;
dprintk("%s() properties.num = %d\n", __func__, tvps->num);
dprintk("%s() properties.props = %p\n", __func__, tvps->props);
Em Mon, 21 Sep 2009 09:28:51 +0200
Richard Röjfors escreveu:
> Patch from Richard Röjfors wrote:
> > The patch number 13019 was added via Douglas Schilling Landgraf
> >
> > to http://linuxtv.org/hg/v4l-dvb master development tree.
> >
> > Kernel patches in this development tree may be modifie
Well, it seems there is a patch for Digivox mini III remote control at
http://linuxtv.org/hg/~anttip/af9015-digivox3_remote/, perhaps Antti
can tell you more about it.
I got this tuner, and no, IR receiver doesn't work for me, it doesn't
even work in WinXP with bundled drivers and software, tested
hermann pitton wrote:
Hi,
Am Sonntag, den 20.09.2009, 06:02 -0300 schrieb Mauro Carvalho Chehab:
Em Sun, 20 Sep 2009 01:24:12 -0700
David Liontooth escreveu:
Sep 18 07:00:01 prato kernel: saa7133[4]/audio: dsp write reg 0x464 = 0x00
Sep 18 07:00:01 prato kernel: saa7133[4]/audio:
Patch from Richard Röjfors wrote:
> The patch number 13019 was added via Douglas Schilling Landgraf
>
> to http://linuxtv.org/hg/v4l-dvb master development tree.
>
> Kernel patches in this development tree may be modified to be backward
> compatible with older kernels. Compatibility modification
Mauro Carvalho Chehab wrote:
Em Sun, 20 Sep 2009 01:24:12 -0700
David Liontooth escreveu:
Sep 18 07:00:01 prato kernel: saa7133[4]/audio: dsp write reg 0x464 = 0x00
Sep 18 07:00:01 prato kernel: saa7133[4]/audio: dsp write reg 0x46c = 0xbb
This means mute. With this, audio wi
55 matches
Mail list logo
