Hi Mauro,
Please pull from http://linuxtv.org/hg/~jfrancois/v4l-dvb
for the following 5 changesets:
01/05: gspca - spca505: Reinitialize the webcam at resume time.
http://linuxtv.org/hg/~jfrancois/v4l-dvb?cmd=changeset;node=61038fe967ba
02/05: gspca - ov519: Add support for the ov518 bridge.
ht
Hi Mauro,
Please pull from http://www.linuxtv.org/hg/~hverkuil/v4l-dvb for the following:
- v4l: i2c modules must be linked before the v4l2 drivers
This fixes the linking bug introduced in 2.6.30.
I've also attached a diff with the same changes that applies directly to the
2.6.30 release.
Than
On 06/12/2009 03:02 AM, Erik de Castro Lopo wrote:
Hi all,
I have a driver for a USB video camera that I'd like to see added to
the mainline kernel, mainly so I don't have to fix breakage due to
constant changes in the kernel :-).
The code is GPL and is available here:
http://stage.bcod
On Fri, 12 Jun 2009, Dongsoo, Nathaniel Kim wrote:
> Hello Guennadi,
>
> So let's assume that camera interface device can process
> V4L2_CID_SHARPNESS and even external camera device can process that,
> then according to your patch both of camera interface and external
> camera device can be issu
Hello Guennadi,
So let's assume that camera interface device can process
V4L2_CID_SHARPNESS and even external camera device can process that,
then according to your patch both of camera interface and external
camera device can be issued to process V4L2_CID_SHARPNESS which I
guess will make image s
Hi all,
I have a driver for a USB video camera that I'd like to see added to
the mainline kernel, mainly so I don't have to fix breakage due to
constant changes in the kernel :-).
The code is GPL and is available here:
http://stage.bcode.com/erikd/ovcamchip
and the history of this code is h
On Fri, 12 Jun 2009 01:01:59 +0200 Hans Verkuil (HV) wrote:
HV> I've fixed the problem in my original patch. I've attached the new
HV> version. It works fine with ivtv, the problems with reading the eeprom
HV> are now fixed. Please test and if it still doesn't work then I'll have
HV> to install my
Hello,
On Thu, Jun 11, 2009 at 9:00 PM, wrote:
> From: Muralidharan Karicheri
>
> common voss module for video drivers
>
> This is a new module added for vpss library functions that are
> used for configuring vpss system module. All video drivers will
> include vpss.h header file and call functi
On Friday 12 June 2009 01:07:46 Mauro Carvalho Chehab wrote:
> Em Fri, 12 Jun 2009 00:26:13 +0200
> Hans Verkuil escreveu:
>
> > On Friday 12 June 2009 00:20:52 Mauro Carvalho Chehab wrote:
> > > Em Thu, 11 Jun 2009 22:22:50 +0200
> > > Hans Verkuil escreveu:
> > >
> > > > On Thursday 11 June 2
Em Fri, 12 Jun 2009 00:26:13 +0200
Hans Verkuil escreveu:
> On Friday 12 June 2009 00:20:52 Mauro Carvalho Chehab wrote:
> > Em Thu, 11 Jun 2009 22:22:50 +0200
> > Hans Verkuil escreveu:
> >
> > > On Thursday 11 June 2009 22:18:10 Hans Verkuil wrote:
> > > > On Thursday 11 June 2009 22:14:02 Ud
On Friday 12 June 2009 00:35:26 Udo A. Steinberg wrote:
> On Thu, 11 Jun 2009 23:46:48 +0200 Hans Verkuil (HV) wrote:
>
> HV> Hmm, my patch needs a bit more work. But to get your setup working try to
> HV> revert the change you made and do just this:
> HV>
> HV> Go to drivers/media/video/Makefile
Em Thu, 11 Jun 2009 14:39:56 +0800
"Figo.zhang" escreveu:
> in v2, if insmod without specify 'unit_video', it use autodetect video device.
> if specify the 'unit_video', it will try to detect start from nr.
>
> Signed-off-by: Figo.zhang
> ---
> drivers/media/video/ov511.c | 32 +
Hello,
Very small suggestion, please see below.
On Thu, Jun 11, 2009 at 9:00 PM, wrote:
> From: Muralidharan Karicheri
>
> Re-sending since previous one missed a file (vpfe_types.h)
>
> VPFE Capture bridge driver
>
> This is version, v2 of vpfe capture bridge driver for doing video
> capture on
On Thu, 11 Jun 2009 23:46:48 +0200 Hans Verkuil (HV) wrote:
HV> Hmm, my patch needs a bit more work. But to get your setup working try to
HV> revert the change you made and do just this:
HV>
HV> Go to drivers/media/video/Makefile and move this line:
HV>
HV> obj-$(CONFIG_VIDEO_MSP3400) += msp3400
On Thu, 11 Jun 2009, Patrick Boettcher wrote:
> On Wed, 27 May 2009, Trent Piepho wrote:
> > On Tue, 26 May 2009, Patrick Boettcher wrote:
> > Does this patch to fix these problems look ok?
>
> In fact, everything looks correct in my eyes. I'll ask Mauro to pull any
> minute from now.
>
> I even ha
On Thu, 2009-06-11 at 13:48 -0500, Mike Isely wrote:
> On Thu, 11 Jun 2009, Steven Toth wrote:
>
> > Mike Isely wrote:
> > > On Sun, 7 Jun 2009, Roger wrote:
> > >
> > > > >From looking at "linux/drivers/media/dvb/frontends/s5h1411.c", The
> > > > s5h1411_readreg wants to see "2" but is getting
On Friday 12 June 2009 00:20:52 Mauro Carvalho Chehab wrote:
> Em Thu, 11 Jun 2009 22:22:50 +0200
> Hans Verkuil escreveu:
>
> > On Thursday 11 June 2009 22:18:10 Hans Verkuil wrote:
> > > On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote:
> > > > Hi all,
> > > >
> > > > With Linux 2.6.30
Em Thu, 11 Jun 2009 22:22:50 +0200
Hans Verkuil escreveu:
> On Thursday 11 June 2009 22:18:10 Hans Verkuil wrote:
> > On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote:
> > > Hi all,
> > >
> > > With Linux 2.6.30 the BTTV driver for my WinTV card claims
> > >
> > > bttv0: audio absent,
On Thursday 11 June 2009 23:38:17 Udo A. Steinberg wrote:
> On Thu, 11 Jun 2009 22:18:10 +0200 Hans Verkuil (HV) wrote:
>
> HV> On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote:
> HV> > Hi all,
> HV> >
> HV> > With Linux 2.6.30 the BTTV driver for my WinTV card claims
> HV> >
> HV> >
On Thu, 11 Jun 2009 22:18:10 +0200 Hans Verkuil (HV) wrote:
HV> On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote:
HV> > Hi all,
HV> >
HV> > With Linux 2.6.30 the BTTV driver for my WinTV card claims
HV> >
HV> > bttv0: audio absent, no audio device found!
HV> >
HV> > and audio does not
On 06/10/2009 10:32 AM, Steven Toth wrote:
David Ward wrote:
Comcast checked the outlet on channels 2 (41 dB) and 83 (39 dB). I
looked afterwards and saw that the first of those is analog
programming, but the second just appears as analog noise on my TV
set. (??) I asked them to check a spec
Hi all,
With Linux 2.6.30 the BTTV driver for my WinTV card claims
bttv0: audio absent, no audio device found!
and audio does not work. This worked up to and including 2.6.29. Is this a
known issue? Does anyone have a fix or a patch for me to try?
Cheers,
- Udo
Output for 2.6
Hello Mauro,
Please pull from
http://linuxtv.org/hg/~dougsland/video4linux for the following:
- dvb: Fix broken link in get_dvb_firmware for nxt2004 (A180)
- tvp514x: try_count off by one
- v4l: generate KEY_CAMERA instead of BTN_0 key events on
input devic
On Thursday 11 June 2009, m-kariche...@ti.com wrote:
> VPFE Capture driver for DaVinci Media SOCs :- DM355 and DM6446
>
> This is the version v2 of the patch series. This is the reworked
> version of the driver based on comments received against the last
> version of the patch.
I'll be glad to se
On Thursday 11 June 2009, m-kariche...@ti.com wrote:
> + I2C_BOARD_INFO("tvp5146", TVP5146_I2C_ADDR),
Minor nit: just use "0x5d" instead of defining TVP5146_I2C_ADDR.
Fix in a v3, iff you make one.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the bod
m-kariche...@ti.com writes:
> From: Muralidharan Karicheri
>
> Remove outdated driver files from davinci git tree
Can you add another patch that removes the old Kconfig/Makfile entries
as well (of course, this only applied to davinci git and not mainline.)
Also, can't we drop the Kconfig/Makefi
On Thursday 11 June 2009 22:18:10 Hans Verkuil wrote:
> On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote:
> > Hi all,
> >
> > With Linux 2.6.30 the BTTV driver for my WinTV card claims
> >
> > bttv0: audio absent, no audio device found!
> >
> > and audio does not work. This worked up
On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote:
> Hi all,
>
> With Linux 2.6.30 the BTTV driver for my WinTV card claims
>
> bttv0: audio absent, no audio device found!
>
> and audio does not work. This worked up to and including 2.6.29. Is this a
> known issue? Does anyone have
Em Thu, 11 Jun 2009 06:57:50 -0400
Andy Walls escreveu:
> All,
>
> The following patch should fix 7 MHz DVB-T with the XC3028 using the
> DTV7 firmware from the xc3028-v27.fw firmware image.
DTV7 and DTV78 support were added and tested in Australia by Christopher
Pascoe, as can be seen on his t
On 06/09/2009 03:45 AM, Joe Belford wrote:
I have an X10 VA11A I'd like to get working with V4L2. As some are
probably aware this device shares a vendor/product id with another
webcam that uses the spca505 module. I've been through the source for
these modules and noticed the fixme's and was
On Thu, 11 Jun 2009, Steven Toth wrote:
> Mike Isely wrote:
> > On Sun, 7 Jun 2009, Roger wrote:
> >
> > > >From looking at "linux/drivers/media/dvb/frontends/s5h1411.c", The
> > > s5h1411_readreg wants to see "2" but is getting "-5" from the i2c bus.
> > >
> > > --- Snip ---
> > >
> > > s5h14
Due to a reorganisation of AVermedia's websites, get_dvb_firmware
no longer works for nxt2004. Fix it.
Signed-off-by: Jan Ceuleers
--- a/Documentation/dvb/get_dvb_firmware.orig2009-06-07
14:38:20.0 +0200
+++ b/Documentation/dvb/get_dvb_firmware 2009-06-07 14:38:55.0 +
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Thu Jun 11 19:00:03 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 11930:ed3781a79c73
gcc version: gcc
Hi Patrick,
FYI: I tried 2.6.30 now and its still not working.
Marco
Patrick Boettcher wrote:
Hi Marco,
On Tue, 2 Jun 2009, Marco Borm wrote:
Definitely interesting. This is a known issue for the dib0700
device, which happens on some USB host controllers. Actually which
one do you use?
"
From: Muralidharan Karicheri
DM355 CCDC hw module
Adds ccdc hw module for DM355 CCDC. This registers with the bridge
driver a set of hw_ops for configuring the CCDC for a specific
decoder device connected to vpfe.
Following are some of the major comments addressed :-
1) removed vpss con
From: Muralidharan Karicheri
DM644x CCDC hw module
This is the hw module for DM644x CCDC. This registers with the
vpfe capture driver and provides a set of hw_ops to configure
CCDC for a specific decoder device connected to the VPFE
Following are some of the major comments addressed :-
From: Muralidharan Karicheri
Remove outdated driver files from davinci git tree
No change from last patch
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Muralidharan Karicheri
---
Applies to Davinci GIT Tree
drivers/media/video/ccdc_davinci.c | 124
drivers
From: Muralidharan Karicheri
common voss module for video drivers
This is a new module added for vpss library functions that are
used for configuring vpss system module. All video drivers will
include vpss.h header file and call functions defined in this
module to configure vpss system module.
From: Muralidharan Karicheri
DM355 platform and board setup
This has platform and board setup changes to support vpfe capture
driver for DM355 EVMs.
Added registration of vpss platform driver based on last review
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Mural
From: Muralidharan Karicheri
DM644x platform and board setup
This adds plarform and board setup changes required to support
vpfe capture driver on DM644x
Added registration of vpss platform driver based on last comment
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by:
From: Muralidharan Karicheri
Makefile and config files for the driver
This adds Makefile and Kconfig changes to build vpfe capture driver.
Added configuration variable for vpss driver based on last review
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Muralidharan
From: Muralidharan Karicheri
CCDC hw device header file
Adds ccdc hw device header for vpfe capture driver
Incorporated review comments against previous patch
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Muralidharan Karicheri
---
Applies to v4l-dvb repository
From: Muralidharan Karicheri
common types used across CCDC modules
No change from last version
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Muralidharan Karicheri
---
Applies to v4l-dvb repository
include/media/davinci/ccdc_types.h | 43 ++
From: Muralidharan Karicheri
Resending to have all patches together since I had to resend couple of
them earlier and had to fix few issues...
VPFE Capture driver for DaVinci Media SOCs :- DM355 and DM6446
This is the version v2 of the patch series. This is the reworked
version of the driver bas
>I am sorry, I do not know how I can explain myself clearer.
>
Thanks for helping me to understand better :)
>Yes, you can stream video with mt9t031.
>
>No, you neither get the framerate measured by the driver nor can you set a
>specific framerate. Frames are produced as fast as it goes, depending
Hello,
hopefully I am here at the right place to ask. If not please
give me a hint what the right place is.
My setup:
I have a Terratec Cinergy C PCI HD. My system is a openSuse 11.1
with kernel 2.6.27.21-0.1-default.(x86_64). I compiled and installed
the drivers as shown in [1]. I tried both s2-
On Thu, 11 Jun 2009, Karicheri, Muralidharan wrote:
> >On Wed, 10 Jun 2009, Karicheri, Muralidharan wrote:
> >
> >> So how do I know what frame-rate I get? Sensor output frame rate depends
> >> on the resolution of the frame, blanking, exposure time etc.
> >
> >This is not supported.
> >
> I am st
>On Wed, 10 Jun 2009, Karicheri, Muralidharan wrote:
>
>> So how do I know what frame-rate I get? Sensor output frame rate depends
>> on the resolution of the frame, blanking, exposure time etc.
>
>This is not supported.
>
I am still not clear. You had said in an earlier email that it can support
Mike Isely wrote:
On Sun, 7 Jun 2009, Roger wrote:
>From looking at "linux/drivers/media/dvb/frontends/s5h1411.c", The
s5h1411_readreg wants to see "2" but is getting "-5" from the i2c bus.
--- Snip ---
s5h1411_readreg: readreg error (ret == -5)
pvrusb2: unregistering DVB devices
device: 'dv
>
>> - video streaming devices like the davinci videoports where you can hook
>> up HDTV receivers or FPGAs: here you definitely need a new API to setup
>> the streaming parameters, and you want to be able to do that from the
>> application as well. Actually, sensors are also hooked up to these
>d
Hi,
In our experience, I have following cases where we need to set the device to
capture/display at certain resolution and fps.
Capture side
-
1) IP Netcam applications. If the solution uses Micron sensors such as
MT9T001/031/P031 etc, application will require to do streaming at var
Em Thu, 11 Jun 2009 08:23:37 +0200 (CEST)
Guennadi Liakhovetski escreveu:
> Hi Mauro, thanks for replying and for the explanation. I'll skip most of
> your message, and just keep the bits I'd like to reply to.
>
> On Wed, 10 Jun 2009, Mauro Carvalho Chehab wrote:
>
> > The same happens here: A
>> Why force all platforms to set it if the driver is perfectly capable do
>> this itself? As I said - this is not a platform-specific feature, it's
>> chip-specific. What good would it make to have all platforms using
>> mt9t031 to specify, that yes, the chip can use both falling and rising
>> p
cx23885: add card Magic-Pro ProHDTV Extreme 2 PCI-E.
Signed-off-by: David T.L. Wong gmail.com>
diff -r a92510aad9e2 -r 7195cfbca974 linux/drivers/media/video/cx23885/cx23885-cards.c
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c Thu Jun 11 19:07:15 2009 +0800
+++ b/linux/drivers/media/v
lgs8gxx: add lgs8g75 demodulator support
Signed-off-by: David T.L. Wong gmail.com>
diff -r af8ce23f588e -r a92510aad9e2 linux/drivers/media/dvb/frontends/lgs8gxx.c
--- a/linux/drivers/media/dvb/frontends/lgs8gxx.c Thu Jun 11 19:05:08 2009 +0800
+++ b/linux/drivers/media/dvb/frontends/lgs8gxx.c Th
lgs8gxx: update signal strength scale
Signed-off-by: David T.L. Wong gmail.com>
diff -r b13db1935c48 -r af8ce23f588e linux/drivers/media/dvb/frontends/lgs8gxx.c
--- a/linux/drivers/media/dvb/frontends/lgs8gxx.c Thu Jun 11 18:59:34 2009 +0800
+++ b/linux/drivers/media/dvb/frontends/lgs8gxx.c Thu J
lgs8gxx: lgs8913 fake signal strength option default on. Original
calculation is too slow.
Signed-off-by: David T.L. Wong gmail.com>
diff -r ed3781a79c73 -r b13db1935c48 linux/drivers/media/dvb/frontends/lgs8gxx.c
--- a/linux/drivers/media/dvb/frontends/lgs8gxx.c Sat Jun 06 16:31:34 2009 +0400
++
On Thu, 11 Jun 2009, Dongsoo, Nathaniel Kim wrote:
> Hello Guennadi,
>
> It's a very interesting patch. Actually some camera interfaces support
> for various image effects and I was wondering how to use them in SoC
> camera subsystem.
>
> But here is a question. Is it possible to make a choice w
On Thu, 11 Jun 2009, Laurent Pinchart wrote:
> Hi Guennadi,
>
> On Thursday 11 June 2009 09:12:37 Guennadi Liakhovetski wrote:
> > Add a new V4L2_CID_BAND_STOP_FILTER integer control, which either switches
> > the band-stop filter off, or sets it to a certain strength.
>
> I'm quoting your e-mai
Hi Guennadi,
On Thursday 11 June 2009 09:12:37 Guennadi Liakhovetski wrote:
> Add a new V4L2_CID_BAND_STOP_FILTER integer control, which either switches
> the band-stop filter off, or sets it to a certain strength.
I'm quoting your e-mail from 2009-05-27:
> COMJ[2] - Band filter enable. After ad
> Em Thu, 11 Jun 2009 08:36:00 +0200
> Hans Verkuil escreveu:
>
>
>> Since I made that change I'm willing to look at this. Some comments
>> definitely
>> need improving at the least.
>
> Thanks! Since the behavior changed, it is important to better document it.
>
>> Also ivtv and cx18 rely on the
Em Thu, 11 Jun 2009 08:36:00 +0200
Hans Verkuil escreveu:
> Since I made that change I'm willing to look at this. Some comments definitely
> need improving at the least.
Thanks! Since the behavior changed, it is important to better document it.
> Also ivtv and cx18 rely on the current behavior
Hello Guennadi,
It's a very interesting patch. Actually some camera interfaces support
for various image effects and I was wondering how to use them in SoC
camera subsystem.
But here is a question. Is it possible to make a choice with the same
CID between icd and ici? I mean, if both of camera in
On Thu, 2 Apr 2009, Stefan Herbrechtsmeier wrote:
> The supported formats count must be set to 0 after debug output
> right before the second pass.
>
Hi Stefan, could you please resend with your Sob?
Thanks
Guennadi
> diff --git a/linux/drivers/media/video/soc_camera.c
> b/linux/drivers/media
All,
The following patch should fix 7 MHz DVB-T with the XC3028 using the
DTV7 firmware from the xc3028-v27.fw firmware image.
Comments?
Regards,
Andy Walls
Signed-off-by: Andy Walls
Tested-by: Terry Wu
diff -r fad35ab59848 linux/drivers/media/common/tuners/tuner-xc2028.c
--- a/linux/drivers
Hi Patrick!
Patrick Boettcher wrote:
Hi Soeren,
For a few weeks I use a Nova-TD-Stick and was annoyed with dvb stream
errors, although the demod bit-error-rate (BER/UNC) was zero.
I could track down this problem to dib0700_streaming_ctrl:
When one channel is streaming and the other channel is
>
>
> On 06/11/2009 11:33 AM, Hans Verkuil wrote:
>>>
>>> On 06/11/2009 10:35 AM, Hans Verkuil wrote:
>
>
>
>>> Hmm,
>>>
>>> Why would we want the *application* to set things like this *at all* ?
>>> with sensors hsync and vsync and other timing are something between
>>> the bridge and the sensor
Dear Dongsoo, Nathaniel ~~
Thanks very much for your help ~~ I am very Sorry to have taken up so
much of your time and you always be so patient. You must be an angel ~~
I am making progress with the help of yours ~ I wish you good luck
everyday with all my heart ~~
在 2009-06-11四的 19:21 +0900，Do
Sorry, I have no idea about that.
I have never been that far.
The only thing I ever heard about v4l2 output, is on ELC 2009
presentation list. You can find at following URL:
http://tree.celinuxforum.org/CelfPubWiki/ELC2009Presentations
Just look for Matthew Porter's presentation.
Or maintainer wh
Dear Dongsoo Nathaniel ~~
Does the capture interface get the image and the output interface
display the image ~ ?
Best regards ~
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.ker
Dear Dongsoo Nathaniel ~~
In the spec , I have readed this sentence :
Video output devices encode stills or image sequences as analog video
signal.
Can you give me a function-example about output interface in real life
~~ ?
Thanks ~
Best regards ~!~
--
To unsubscribe from this list: send the lin
On 06/11/2009 11:33 AM, Hans Verkuil wrote:
On 06/11/2009 10:35 AM, Hans Verkuil wrote:
Hmm,
Why would we want the *application* to set things like this *at all* ?
with sensors hsync and vsync and other timing are something between
the bridge and the sensor, actaully in my experience the
>
>
> On 06/11/2009 10:35 AM, Hans Verkuil wrote:
>>> Karicheri, Muralidharan a écrit :
>> We need
>> streaming capability in the driver. This is how our driver works
>> with mt9t031 sensor
>>raw-bus (10 bit)
>> vpfe-capture - mt9t031 driver
>>
On 06/11/2009 10:35 AM, Hans Verkuil wrote:
Karicheri, Muralidharan a écrit :
We need
streaming capability in the driver. This is how our driver works
with mt9t031 sensor
raw-bus (10 bit)
vpfe-capture - mt9t031 driver
|
Hi Mauro,
can you please pull from
http://www.kernellabs.com/hg/~pboettcher/v4l-dvb-fixes/
for
- b2c2: Fix problems with frontend attachment
thanks,
Patrick.
--
Mail: patrick.boettc...@desy.de
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
--
To unsubscribe from this list: send the line
Hi Trent,
On Wed, 27 May 2009, Trent Piepho wrote:
On Tue, 26 May 2009, Patrick Boettcher wrote:
MHz to 161 Mhz as welll as 439-447 MHz. Probably wrong. My guess is the
data sheet says, "low band 48 to 154 MHz, mid band 161 MHz to 439 MHz,
etc.," where 154 is the frequency of the last channe
> Karicheri, Muralidharan a écrit :
>>
We need
streaming capability in the driver. This is how our driver works
with mt9t031 sensor
raw-bus (10 bit)
vpfe-capture - mt9t031 driver
||
V
Hi Soeren,
On Wed, 3 Jun 2009, soeren.m...@stud.uni-hannover.de wrote:
Soeren.Moch wrote:
For a few weeks I use a Nova-TD-Stick and was annoyed with dvb stream
errors, although the demod bit-error-rate (BER/UNC) was zero.
I could track down this problem to dib0700_streaming_ctrl:
When one cha
Hi Matthias,
On Tue, 26 May 2009, Matthias Schwarzott wrote:
This patch adds suspend/resume support to flexcop-pci driver.
I could only test this patch with the bare card, but without having a DVB-S
signal. I checked it with and without running szap (obviously getting no
lock).
It works fine he
Karicheri, Muralidharan a écrit :
We need
streaming capability in the driver. This is how our driver works
with mt9t031 sensor
raw-bus (10 bit)
vpfe-capture - mt9t031 driver
||
V
Use the V4L2_CID_SHARPNESS control to switch SH-mobile camera low-pass filter.
Signed-off-by: Guennadi Liakhovetski
---
Is this a suitable control for this filter?
drivers/media/video/sh_mobile_ceu_camera.c | 54 +++-
1 files changed, 53 insertions(+), 1 deletions(-)
Until now soc-camera only supported client (sensor) controls. This patch
enables camera-host drivers to implement their own controls too.
Signed-off-by: Guennadi Liakhovetski
---
drivers/media/video/soc_camera.c | 24
include/media/soc_camera.h |4
2 fil
The V4L2_CID_BAND_STOP_FILTER control is used to switch the "Banding
Filter" on OV772x cameras on and off and to set the minimum AEC value in
BDBASE register. BDBASE default value is 0xff, which makes the use of the
filter practically unnoticeable. Reducing BDBASE increases the effect,
which ma
Add a new V4L2_CID_BAND_STOP_FILTER integer control, which either switches the
band-stop filter off, or sets it to a certain strength.
Signed-off-by: Guennadi Liakhovetski
---
include/linux/videodev2.h |4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/include/linux/vide
Hi all
I asked already before what controls to use for various image filters,
have only got replies from one person (thanks, Nate), so, here come
patches. One of them, adding the missing control could be applied, I
think, if the affected file hasn't changed too much in the last month.
Others w
85 matches
Mail list logo
