Added kcs device and lpc ctrl device to enable LPC clock in Facebook
Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../dts/aspeed-bmc-facebook-tiogapass.dts | 30 +++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
Added kcs device support for lpc BMC.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-g5.dtsi | 33 +++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d107459fc0f8
On 12/12/18, 5:04 PM, "Joel Stanley" wrote:
On Thu, 13 Dec 2018 at 07:34, Vijay Khemka wrote:
>
> Added kcs device and lpc ctrl device to enable LPC clock in Facebook
> Tiogapass device tree.
As we're going to re-spin, it's a good
Added ADC and other sensor devices in Facebook Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../dts/aspeed-bmc-facebook-tiogapass.dts | 33 +--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
b
Added lpc ctrl device to enable LPC clock in Facebook
Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../boot/dts/aspeed-bmc-facebook-tiogapass.dts | 17 +
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
b/arch/arm
Added kcs device in Facebook Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
b/arch/arm/boot/dts/aspeed-bmc-facebook
Added kcs device support for lpc BMC.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-g5.dtsi | 33 +++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d107459fc0f8
On 12/14/18, 12:42 PM, "Linux-aspeed on behalf of Vijay Khemka"
wrote:
On 12/14/18, 11:22 AM, "openbmc on behalf of Jae Hyun Yoo"
wrote:
Hi Vijay,
On 12/14/2018 10:11 AM, Vijay Khemka wrote:
> On 12/13/18, 2:56 PM
Added kcs device support for lpc BMC.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-g5.dtsi | 33 +++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d107459fc0f8
Added kcs device in Facebook Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
b/arch/arm/boot/dts/aspeed-bmc-facebook
Added lpc ctrl device to enable LPC clock in Facebook
Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../boot/dts/aspeed-bmc-facebook-tiogapass.dts | 17 +
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
b/arch/arm
Added ADC and other sensor devices in Facebook Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../dts/aspeed-bmc-facebook-tiogapass.dts | 23 +--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
b
On 12/13/18, 2:56 PM, "Joel Stanley" wrote:
On Fri, 14 Dec 2018 at 06:23, Vijay Khemka wrote:
>
> Added ADC and other sensor devices in Facebook Tiogapass device tree.
>
> Signed-off-by: Vijay Khemka
> ---
> .../dts/aspeed-bmc-fac
On 12/14/18, 11:22 AM, "openbmc on behalf of Jae Hyun Yoo"
wrote:
Hi Vijay,
On 12/14/2018 10:11 AM, Vijay Khemka wrote:
> On 12/13/18, 2:56 PM, "Joel Stanley" wrote:
> > + oemname0 = "MB_P3V3"
Added kcs device support for lpc BMC.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-g5.dtsi | 29 -
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d107459fc0f8
Added kcs device support for lpc BMC.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-g5.dtsi | 29 -
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d107459fc0f8
Added kcs device and lpc ctrl device to enable LPC clock in Facebook
Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../dts/aspeed-bmc-facebook-tiogapass.dts | 30 +++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
Please ignore this patch as it is duplicate. It is included in list of 2
patches I have sent just before.
On 12/10/18, 12:08 PM, "Vijay Khemka" wrote:
Added kcs device support for lpc BMC.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-g5
Added ADC and other sensor devices in Facebook Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../dts/aspeed-bmc-facebook-tiogapass.dts | 33 +--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
b
Thanks Jay,
I will take care of your comments and send next version.
Regards
-Vijay
On 12/11/18, 10:40 AM, "Jae Hyun Yoo" wrote:
Hi Vijay,
On 12/10/2018 12:07 PM, Vijay Khemka wrote:
> Added kcs device support for lpc BMC.
>
> Signed-o
Added kcs device and lpc ctrl device to enable LPC clock in Facebook
Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../dts/aspeed-bmc-facebook-tiogapass.dts | 30 +++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
Added kcs device support for lpc BMC.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-g5.dtsi | 33 +++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d107459fc0f8
Added kcs device support for lpc BMC.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-g5.dtsi | 33 +++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d107459fc0f8
Added kcs device and lpc ctrl device to enable LPC clock in Facebook
Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../dts/aspeed-bmc-facebook-tiogapass.dts | 30 +++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
Joel, Can you please take care of these patches merge.
On 12/17/18, 12:04 PM, "Vijay Khemka" wrote:
Added lpc ctrl device to enable LPC clock in Facebook
Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../boot/dts/aspeed-bmc-facebook-tiogapass
Please merge these patches in upstream kernel.
Regards
-Vijay
On 12/20/18, 10:06 AM, "Linux-aspeed on behalf of Vijay Khemka"
wrote:
Joel, Can you please take care of these patches merge.
On 12/17/18, 12:04 PM, "Vijay Khemka" wrote:
Added lpc c
Thanks David
On 10/26/18, 10:36 AM, "David Miller" wrote:
From: Vijay Khemka
Date: Fri, 26 Oct 2018 17:19:49 +
> Do you have any timeline when it is going to open next or how do I
> know.
I always announce net-next openning and closing
machines.
This also adds an entry of tiogapass device tree file in Makefile
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/Makefile| 1 +
.../dts/aspeed-bmc-facebook-tiogapass.dts | 146 ++
2 files changed, 147 insertions(+)
create mode 100644 arch/arm
machines.
This also adds an entry of tiogapass device tree file in Makefile
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/Makefile| 1 +
.../dts/aspeed-bmc-facebook-tiogapass.dts | 146 ++
2 files changed, 147 insertions(+)
create mode 100644 arch/arm
Hi Joel,
Can you please apply this below patch to kernel 5.0.
Regards
-Vijay
On 3/18/19, 12:46 PM, "openbmc on behalf of Vijay Khemka"
wrote:
Hi Joel,
Can you please apply this patch as "
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt" has already been appl
Hi Joel,
Please apply this patch.
Regards
-Vijay
On 3/18/19, 12:46 PM, "openbmc on behalf of Vijay Khemka"
wrote:
Hi Joel,
Please apply this patch.
Regards
-Vijay
On 3/5/19, 12:06 PM, "openbmc on behalf of Vijay Khemka"
wrote:
On 2/10/19, 9:22 PM, "Andrew Jeffery" wrote:
On Fri, 25 Jan 2019, at 05:59, Vijay Khemka wrote:
>
>
> On 1/24/19, 12:16 AM, "Greg Kroah-Hartman"
wrote:
>
> On Wed, Jan 23, 2019 at 03:06:34PM -0800, Vijay Khemka wrote:
Hi Joel,
Can you please apply this patch as "
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt" has already been applied
Regards
-Vijay
On 3/5/19, 4:15 PM, "Linux-aspeed on behalf of Vijay Khemka"
wrote:
Joel,
Did this patch apply upstream. Somehow I can&
Hi Joel,
Please apply this patch.
Regards
-Vijay
On 3/5/19, 12:06 PM, "openbmc on behalf of Vijay Khemka"
wrote:
Please review below patch.
Regards
-Vijay
On 1/30/19, 10:14 AM, "Vijay Khemka" wrote:
Enabling vuart fo
request is coming from
Netlink.
Signed-off-by: Justin Lee
Reviewed-by: Vijay Khemka
---
net/ncsi/ncsi-cmd.c | 11 +--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/net/ncsi/ncsi-cmd.c b/net/ncsi/ncsi-cmd.c
index eab4346..0187e65 100644
On 8/16/19, 3:20 AM, "openbmc on behalf of John Wang"
wrote:
Add the driver to monitor Inspur Power System power supplies
with hwmon over pmbus.
This driver adds sysfs attributes for additional power supply data,
including vendor, model, part_number, serial number,
fi
incorrect).
Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver')
Signed-off-by: Rashmica Gupta
Reviewed-by: Vijay Khemka
---
drivers/gpio/gpio-aspeed.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpi
On 9/10/19, 3:05 PM, "Florian Fainelli" wrote:
On 9/10/19 2:37 PM, Vijay Khemka wrote:
> HW checksum generation is not working for AST2500, specially with IPV6
> over NCSI. All TCP packets with IPv6 get dropped. By disabling this
> it works perfe
On 9/10/19, 3:05 PM, "Florian Fainelli" wrote:
On 9/10/19 2:37 PM, Vijay Khemka wrote:
> HW checksum generation is not working for AST2500, specially with IPV6
> over NCSI. All TCP packets with IPv6 get dropped. By disabling this
> it works perfe
On 9/10/19, 3:50 PM, "Linux-aspeed on behalf of Vijay Khemka"
wrote:
On 9/10/19, 3:05 PM, "Florian Fainelli" wrote:
On 9/10/19 2:37 PM, Vijay Khemka wrote:
> HW checksum generation is not working for AST2500, specially with IPV6
On 9/11/19, 7:49 AM, "Joel Stanley" wrote:
Hi Ben,
On Tue, 10 Sep 2019 at 22:05, Florian Fainelli wrote:
>
> On 9/10/19 2:37 PM, Vijay Khemka wrote:
> > HW checksum generation is not working for AST2500, specially with IPV6
> > ove
On 9/11/19, 5:16 AM, "Linux-aspeed on behalf of Rashmica Gupta"
wrote:
Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver')
Signed-off-by: Rashmica Gupta
---
drivers/gpio/gpio-aspeed.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/g
On 9/10/19, 4:08 PM, "Linux-aspeed on behalf of Vijay Khemka"
wrote:
On 9/10/19, 3:50 PM, "Linux-aspeed on behalf of Vijay Khemka"
wrote:
On 9/10/19, 3:05 PM, "Florian Fainelli" wrote:
On 9/10/
On 9/11/19, 11:34 AM, "Florian Fainelli" wrote:
On 9/11/19 11:30 AM, Vijay Khemka wrote:
>
>
> On 9/10/19, 4:08 PM, "Linux-aspeed on behalf of Vijay Khemka"
wrote:
>
>
>
> On 9/10/19, 3:50 PM, "L
then let
it disabled for every other types as well. As we are seeing issues with
LLDP not working with this enabled filtering. And there are other issues
with IPV6.
By Disabling this multicast completely, it is working for both IPV6 as
well as LLDP.
Signed-off-by: Vijay Khemka
---
net/ncsi
On 9/15/19, 7:39 PM, "Samuel Mendoza-Jonas" wrote:
On Thu, 2019-09-12 at 12:04 -0700, Vijay Khemka wrote:
> Disabling multicast filtering from NCSI if it is supported. As it
> should not filter any multicast packets. In current code, multicast
> filter is
Please review below patch and provide your valuable feedback.
Regards
-Vijay
On 9/11/19, 1:05 PM, "Vijay Khemka" wrote:
HW checksum generation is not working for AST2500, specially with IPV6
over NCSI. All TCP packets with IPv6 get dropped. By disabling this
it works
Florian/Joel,
Can you please look into below patch and let me know who can apply this.
Regards
-Vijay
On 9/17/19, 12:34 PM, "Vijay Khemka" wrote:
Please review below patch and provide your valuable feedback.
Regards
-Vijay
On 9/11/19, 1:05 PM, "Vijay
On 10/8/19, 9:37 PM, "Benjamin Herrenschmidt" wrote:
On Wed, 2019-09-11 at 14:48 +, Joel Stanley wrote:
> Hi Ben,
>
> On Tue, 10 Sep 2019 at 22:05, Florian Fainelli
> wrote:
> >
> > On 9/10/19 2:37 PM, Vijay Khemka wrote:
Resending this patch again.
On 9/11/19, 1:05 PM, "Vijay Khemka" wrote:
HW checksum generation is not working for AST2500, specially with IPV6
over NCSI. All TCP packets with IPv6 get dropped. By disabling this
it works perfectly fine with IPV6. As it works for IPV4
On 10/10/19, 8:11 PM, "Benjamin Herrenschmidt"
wrote:
On Thu, 2019-10-10 at 19:15 +0000, Vijay Khemka wrote:
> Any news on this ? AST2400 has no HW checksum logic in HW, AST2500
> should work for IPV4 fine, we should only selectively disable it fo
On 10/16/19, 6:29 PM, "Benjamin Herrenschmidt"
wrote:
On Fri, 2019-10-11 at 14:30 -0700, Vijay Khemka wrote:
> HW checksum generation is not working for AST2500, specially with
> IPV6
> over NCSI. All TCP packets with IPv6 get dropped. By disabling
On 10/17/19, 4:15 PM, "Benjamin Herrenschmidt"
wrote:
On Thu, 2019-10-17 at 22:01 +0000, Vijay Khemka wrote:
>
> On 10/16/19, 6:29 PM, "Benjamin Herrenschmidt"
wrote:
>
> On Fri, 2019-10-11 at 14:30 -0700, Vijay Khemka wrote:
&
On 10/17/19, 5:33 PM, "Benjamin Herrenschmidt"
wrote:
On Fri, 2019-10-18 at 00:06 +0000, Vijay Khemka wrote:
>
> > This is not a matter of unsupported csum, it is broken hw csum.
> > That's why we disable hw checksum. My guess is
On 10/18/19, 5:03 PM, "Benjamin Herrenschmidt"
wrote:
On Fri, 2019-10-18 at 22:50 +0000, Vijay Khemka wrote:
> I don't have much understanding of IP Stack but I went through code
details and
> you are right and found that it should fallback to SW calcula
Memory-region and flash phandle is not a required parameter, it is
optional to describe in device tree and needed only use basis.
Signed-off-by: Vijay Khemka
---
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree
Thanks Lee,
On 1/29/19, 4:30 AM, "Lee Jones" wrote:
On Fri, 18 Jan 2019, Vijay Khemka wrote:
> Memory-region and flash phandle is not a required parameter, it is
> optional to describe in device tree and needed only use basis.
>
> Signe
Sure Joel,
I will do v2 and submit for review today.
Regards
-Vijay
On 1/15/19, 4:11 PM, "Joel Stanley" wrote:
Hi Vijay,
On Tue, 15 Jan 2019 at 12:51, Vijay Khemka wrote:
>
> Makiing memory-region as optional parameter in device tree if
> user
Makiing memory-region and flash as optional parameter in device
tree if user needs to use these parameter through ioctl then
need to define in devicetree.
Signed-off-by: Vijay Khemka
---
drivers/misc/aspeed-lpc-ctrl.c | 58 +-
1 file changed, 36 insertions(+), 22
On 1/16/19, 10:17 PM, "Joel Stanley" wrote:
On Thu, 17 Jan 2019 at 09:02, Vijay Khemka wrote:
>
> Makiing memory-region and flash as optional parameter in device
> tree if user needs to use these parameter through ioctl then
> need t
On 1/16/19, 6:49 PM, "Joel Stanley" wrote:
On Fri, 21 Dec 2018 at 05:06, Vijay Khemka wrote:
>
> On 12/17/18, 12:04 PM, "Vijay Khemka" wrote:
>
> Added lpc ctrl device to enable LPC clock in Facebook
> Tiogapass device
Memory-region and flash phandle is not a required parameter, it is
optional to describe in device tree and needed only use basis.
Signed-off-by: Vijay Khemka
---
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 4
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree
On 1/13/19, 2:39 PM, "Andrew Jeffery" wrote:
Hi Vijay,
Sorry for providing an opinion so late, however:
On Sat, 12 Jan 2019, at 11:03, Vijay Khemka wrote:
> Joel,
> Please merge these patches as it is required by facebook platform.
Makiing memory-region as optional parameter in device tree if
user needs to use memory-region then define in devicetree.
Signed-off-by: Vijay Khemka
---
drivers/misc/aspeed-lpc-ctrl.c | 30 ++
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/drivers
, at 08:31, Vijay Khemka wrote:
> Makiing memory-region and flash as optional parameter in device
> tree if user needs to use these parameter through ioctl then
> need to define in devicetree.
>
> Signed-off-by: Vijay Khemka
> ---
> driv
Memory-region and flash phandle is not a required parameter, it is
optional to describe in device tree and needed only use basis.
Signed-off-by: Vijay Khemka
---
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree
Corrected some of return values with appropriate meanings.
Signed-off-by: Vijay Khemka
---
drivers/misc/aspeed-lpc-ctrl.c | 15 +++
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/misc/aspeed-lpc-ctrl.c b/drivers/misc/aspeed-lpc-ctrl.c
index 332210e06e98
Added lpc control for enabling lpc clock, peci for cpu sensors and lpc
snoop devices to Facebook Tiogapass device tree.
Signed-off-by: Vijay Khemka
---
.../arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts | 14 ++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed
Added uart2 and uart3 in Facebook Tiogapass for routing serial input
from Host to BMC for SoL via LPC.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts | 10 ++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook
On 1/24/19, 12:16 AM, "Greg Kroah-Hartman" wrote:
On Wed, Jan 23, 2019 at 03:06:34PM -0800, Vijay Khemka wrote:
> Corrected some of return values with appropriate meanings.
>
> Signed-off-by: Vijay Khemka
> ---
> drivers/mi
On 5/5/19, 9:24 PM, "Andrew Jeffery" wrote:
On Sat, 4 May 2019, at 03:43, Vijay Khemka wrote:
> Corrected some of return values with appropriate meanings and reported
> relevant messages as debug information.
>
> Signed-off-by: Vijay Khemk
Let me send both patches.
On 4/30/19, 11:45 PM, "Greg Kroah-Hartman" wrote:
On Wed, May 01, 2019 at 05:55:07AM +, Joel Stanley wrote:
> On Fri, 18 Jan 2019 at 20:12, Vijay Khemka wrote:
> >
> > Hi Andrew,
> > Thanks for this review, I
Makiing memory-region and flash as optional parameter in device
tree if user needs to use these parameter through ioctl then
need to define in devicetree.
Signed-off-by: Vijay Khemka
---
drivers/misc/aspeed-lpc-ctrl.c | 58 +-
1 file changed, 36 insertions(+), 22
Corrected some of return values with appropriate meanings.
Signed-off-by: Vijay Khemka
---
drivers/misc/aspeed-lpc-ctrl.c | 15 +++
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/misc/aspeed-lpc-ctrl.c b/drivers/misc/aspeed-lpc-ctrl.c
index 332210e06e98
On 5/1/19, 11:49 PM, "Andrew Jeffery" wrote:
On Thu, 2 May 2019, at 16:10, Greg Kroah-Hartman wrote:
> On Wed, May 01, 2019 at 03:38:36PM -0700, Vijay Khemka wrote:
> > Corrected some of return values with appropriate meanings.
> >
Corrected some of return values with appropriate meanings and reported
relevant messages as debug information.
Signed-off-by: Vijay Khemka
---
drivers/misc/aspeed-lpc-ctrl.c | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/aspeed-lpc-ctrl.c b
On 8/8/19, 3:27 PM, "openbmc on behalf of Tao Ren"
wrote:
On 8/8/19 2:16 PM, Andrew Lunn wrote:
> On Thu, Aug 08, 2019 at 07:02:54PM +, Tao Ren wrote:
>> Hi Andrew,
>>
>> On 8/8/19 6:32 AM, Andrew Lunn wrote:
Let me prepare patch v2 using device tree. I'm not
Joel,
I have added all 3 id in the documentation patch and I am not sure if that
patch has been applied or not.
Regards
-Vijay
On 8/1/19, 11:31 PM, "Joel Stanley" wrote:
Add pxe1610 as a trivial device
On Tue, 23 Jul 2019 at 17:14, Vijay Khemka wrote:
&g
Lgtm except one small comment below.
On 8/6/19, 5:22 PM, "openbmc on behalf of Tao Ren"
wrote:
Currently BMC's MAC address is calculated by adding 1 to NCSI NIC's base
MAC address when CONFIG_NCSI_OEM_CMD_GET_MAC option is enabled. The logic
doesn't work for platforms with differen
On 7/23/19, 7:53 AM, "Rob Herring" wrote:
On Tue, Jul 23, 2019 at 8:50 AM Rob Herring wrote:
>
> On Mon, Jul 22, 2019 at 6:46 PM Vijay Khemka wrote:
> >
> > The pxe1610 is a voltage regulator from Infineon. It also supports
> >
On 6/5/19, 1:47 PM, "Guenter Roeck" wrote:
On Thu, May 30, 2019 at 04:11:56PM -0700, Vijay Khemka wrote:
> Added pmbus driver for the new device Infineon pxe1610
> voltage regulator. It also supports similar family device
> PXE1110 and PXM1310.
>
Please update on this patch.
On 5/30/19, 1:37 PM, "Vijay Khemka" wrote:
Making memory-region and flash as optional parameter in device
tree if user needs to use these parameter through ioctl then
need to define in devicetree.
Signed-off-by: Vijay Khemka
R
Please review below patch.
Regards
-Vijay
On 1/30/19, 10:14 AM, "Vijay Khemka" wrote:
Enabling vuart for Facebook tiogapass
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts | 5 +
1 file changed, 5 insertions(+)
Joel,
Did this patch apply upstream. Somehow I can't find this patch in linux or
linux-next or our obmc dev4.19.
Regards
-Vijay
On 1/17/19, 10:53 AM, "Linux-aspeed on behalf of Vijay Khemka"
wrote:
On 1/16/19, 10:17 PM, "Joel Stanley" wrote:
Joel,
Please merge these patches as it is required by facebook platform.
Regards
-Vijay
On 1/7/19, 11:25 AM, "Linux-aspeed on behalf of Vijay Khemka"
wrote:
Please merge these patches in upstream kernel.
Regards
-Vijay
On 12/20/18, 10:06 AM, "Linux-a
Thanks Andrew,
I have revised patch as I found some more changes. Sent a new version.
Regards
-Vijay
On 9/13/18, 1:18 PM, "Andrew Lunn" wrote:
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1206,4 +1206,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-opp-witherspoon.dtb \
> aspe
Initial introduction of Facebook TiogaPass family equipped with
Aspeed 2500 BMC SoC. TiogaPass is a x86 server development kit
with a ASPEED ast2500 BMC manufactured by Facebook.
This adds an entry of Facebook in Documentation for vendor prefix
---
Documentation/devicetree/bindings/vendor-prefixe
Initial introduction of Facebook TiogaPass family equipped with
Aspeed 2500 BMC SoC. TiogaPass is a x86 server development kit
with a ASPEED ast2500 BMC manufactured by Facebook.
This adds an entry of Facebook in Documentation for vendor prefix
Signed-off-by: Vijay Khemka
---
Documentation
On 5/28/20, 7:15 AM, "Manikandan Elumalai"
wrote:
The adm1278 temperature sysfs attribute need it for one of the our openbmc
platform .
This functionality is not enabled by default, so PMON_CONFIG needs to be
modified in order to enable it.
There is no Signed-off-by.
On 5/29/20, 5:47 AM, "Manikandan Elumalai"
wrote:
The adm1278 temperature sysfs attribute need it for one of the openbmc
platform .
This functionality is not enabled by default, so PMON_CONFIG needs to be
modified in order to enable it.
Signed-off-by : Manikandan Elumala
On 5/29/20, 11:56 AM, "Guenter Roeck" wrote:
On 5/29/20 10:57 AM, Vijay Khemka wrote:
>
>
> On 5/29/20, 5:47 AM, "Manikandan Elumalai"
wrote:
>
> The adm1278 temperature sysfs attribute need it for one of the
openbmc platf
Removed vuart for facebook tiogapass platform as it uses uart2 and
uart3 pin with aspeed uart routing feature.
Signed-off-by: Vijay Khemka
---
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts | 5 -
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook
Makiing memory-region and flash as optional parameter in device
tree if user needs to use these parameter through ioctl then
need to define in devicetree.
Signed-off-by: Vijay Khemka
---
drivers/soc/aspeed/aspeed-lpc-ctrl.c | 58 +---
1 file changed, 36 insertions(+), 22
On 5/24/19, 8:59 AM, "Greg Kroah-Hartman" wrote:
On Wed, May 01, 2019 at 03:34:11PM -0700, Vijay Khemka wrote:
> Makiing memory-region and flash as optional parameter in device
> tree if user needs to use these parameter through ioctl then
> need to d
On 6/20/19, 1:29 AM, "Joel Stanley" wrote:
On Wed, 19 Jun 2019 at 12:56, Arnd Bergmann wrote:
>
> gcc warns that a mising "flash" phandle node leads to undefined
> behavior later:
>
> drivers/soc/aspeed/aspeed-lpc-ctrl.c: In function 'aspeed_lpc_ctrl_probe':
> driv
c/aspeed/aspeed-lpc-ctrl.c:201:18: error: '*((void *)&resm+8)'
may be used uninitialized in this function [-Werror=maybe-uninitialized]
Only set the flash base and size if we find a phandle in the device
tree.
Thanks for fixing this.
Reviewed-by: Vijay Khemka
R
Hi Andrew,
Any update on this patch or do I need any more rework.
Regards
-Vijay
On 6/6/19, 11:51 AM, "Vijay Khemka" wrote:
Please update on this patch.
On 5/30/19, 1:37 PM, "Vijay Khemka" wrote:
Making memory-region and flash as optional
On 5/29/19, 6:01 PM, "Guenter Roeck" wrote:
On 5/29/19 3:35 PM, Vijay Khemka wrote:
> Added pmbus driver for the new device Infineon pxe1610
> voltage regulator. It also supports similar family device
> PXE1110 and PXM1310.
>
> Si
Making memory-region and flash as optional parameter in device
tree if user needs to use these parameter through ioctl then
need to define in devicetree.
Signed-off-by: Vijay Khemka
Reviewed-by: Andrew Jeffery
---
drivers/soc/aspeed/aspeed-lpc-ctrl.c | 58 +---
1 file
On 5/29/19, 9:02 PM, "Andrew Jeffery" wrote:
On Thu, 30 May 2019, at 02:51, Vijay Khemka wrote:
> Makiing
Typo here, but I'd prefer to see this patch go in, so
Corrected in next version v2.
> memory-region and flash as optiona
1 - 100 of 102 matches
Mail list logo