On 5/29/20, 5:47 AM, "Manikandan Elumalai" <manikandan.hcl.ers....@gmail.com>
wrote:
The adm1278 temperature sysfs attribute need it for one of the openbmc
platform .
This functionality is not enabled by default, so PMON_CONFIG needs to be
modified in order to enable it.
Signed-off-by : Manikandan Elumalai <manikandan.hcl.ers....@gmail.com>
v2:
- Add Signed-off-by.
- Removed ADM1278_TEMP1_EN check.
---
drivers/hwmon/pmbus/adm1275.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 5caa37fb..ab5fceb 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -666,7 +666,23 @@ static int adm1275_probe(struct i2c_client *client,
tindex = 3;
info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
- PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+
+ config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
+ if (config < 0)
+ return config;
+
+ /* Enable TEMP1 by default */
+ config |= ADM1278_TEMP1_EN;
+ ret = i2c_smbus_write_byte_data(client,
+ ADM1275_PMON_CONFIG,
+ config);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to enable temperature config\n");
+ return -ENODEV;
+ }
You don't need this above code removing check as below should be enough to
populate sysfs entry you need.
/* Enable VOUT if not enabled (it is disabled by default) */
if (!(config & ADM1278_VOUT_EN)) {
@@ -681,9 +697,6 @@ static int adm1275_probe(struct i2c_client *client,
}
}
- if (config & ADM1278_TEMP1_EN)
- info->func[0] |=
- PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
if (config & ADM1278_VIN_EN)
info->func[0] |= PMBUS_HAVE_VIN;
break;
--
2.7.4
