Patch series looks good.
Acked-by: Scott Branden
On 16-06-20 02:07 PM, Jon Mason wrote:
An overall clean-up to the MAINTAINER entries for a few Broadcom SoCs.
Jon Mason (4):
MAINTAINERS: Fix nsp false-positives
MAINTAINERS: Add NS2 entry
MAINTAINERS: Update BCM63XX entry
Hi Dhananjaya,
One minor comment inline.
On 16-06-20 07:14 AM, Yendapally Reddy Dhananjaya Reddy wrote:
Add support for the PWM controller present in Broadcom's iProc
family of SoCs. This driver is derived from the pwm-bcm-kona
driver, with changes to the register offsets and bit positions.
It
Hi Gerd/Eric
On 16-09-08 12:44 AM, Gerd Hoffmann wrote:
On Mi, 2016-09-07 at 20:13 +0200, Stefan Wahren wrote:
Gerd Hoffmann hat am 7. September 2016 um 12:31
geschrieben:
From: Eric Anholt
This will be used for having EMMC (sdhci-bcm2835.c) drive the
wireless.
sdhci-bcm2835.c has been r
Hi Bjorn,
Ray is off this week and will likely have some comments next week.
On 16-08-24 10:54 AM, Bjorn Helgaas wrote:
[+cc Ray, Scott, Jon, bcm-kernel-feedback-list]
On Wed, Aug 24, 2016 at 03:07:52PM +0800, Ley Foon Tan wrote:
On Mon, Aug 22, 2016 at 11:47 PM, Bjorn Helgaas wrote:
On Fri
write functions.
Signed-off-by: Shreesha Rajashekar
Signed-off-by: Scott Branden
---
drivers/w1/masters/ds1wm.c | 18 --
include/linux/mfd/ds1wm.h | 2 ++
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c
From: Shreesha Rajashekar
Adding document for IPROC d1w driver.
Signed-off-by: Shreesha Rajashekar
Signed-off-by: Scott Branden
---
.../devicetree/bindings/mfd/brcm,iproc-d1w.txt | 27 ++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree
Add support for Broadcom Dallas One wire (D1W) bus master controller.
This patch series adds a callback for the ds1wm read/write functions
to the common DS1W driver code and the Broadcom specific DS1W controller.
Shreesha Rajashekar (3):
dt-bindings: mfd: d1w: iproc: Documentation for d1w drive
From: Shreesha Rajashekar
d1w bus master controller is added as a mfd node.
ds1wm driver is hooked to this node through the mfd framework.
Signed-off-by: Shreesha Rajashekar
Signed-off-by: Scott Branden
---
drivers/mfd/Kconfig | 11 +++
drivers/mfd/Makefile| 1 +
drivers
Hi Lee,
On 17-08-17 03:02 AM, Lee Jones wrote:
On Wed, 16 Aug 2017, Scott Branden wrote:
From: Shreesha Rajashekar
d1w bus master controller is added as a mfd node.
Why?
ds1wm driver is hooked to this node through the mfd framework.
Why?
It looks like it was added under mfd as htc
Thanks for review Rob
On 17-08-16 01:45 PM, Rob Herring wrote:
On Wed, Aug 16, 2017 at 12:45 PM, Scott Branden
wrote:
From: Shreesha Rajashekar
Adding document for IPROC d1w driver.
Signed-off-by: Shreesha Rajashekar
Signed-off-by: Scott Branden
---
.../devicetree/bindings/mfd/brcm
Hi Rob,
On 17-06-18 07:04 AM, Rob Herring wrote:
On Mon, Jun 12, 2017 at 01:26:00PM -0700, Arun Parameswaran wrote:
Add device tree binding documentation for the Broadcom DTE
PTP clock driver.
Signed-off-by: Arun Parameswaran
---
Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt | 13
Hi Jon,
On 17-04-28 01:50 PM, Jon Mason wrote:
On Fri, Apr 28, 2017 at 4:36 PM, Scott Branden
wrote:
On 17-04-28 01:11 PM, Jon Mason wrote:
Tweak the Kconfig description to mention support for NSP and make the
default on for iProc based platforms.
Signed-off-by: Jon Mason
---
drivers
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Eric Anholt
Cc: Florian Fainelli
Cc: Jon Mason
Cc: Linus Walleij
Cc: Ray Jui
Cc: Sco
Hi Srinath,
On 17-05-30 02:08 AM, Srinath Mannam wrote:
We found a concurrency issue in NVMe Init when we initialize
multiple NVMe connected over PCIe switch.
Setup details:
- SMP system with 8 ARMv8 cores running Linux kernel(4.11).
- Two NVMe cards are connected to PCIe RC through bridge
Hi Ray,
On 17-05-30 10:04 AM, Ray Jui wrote:
Hi Srinath and Scott,
On 5/30/17 8:44 AM, Scott Branden wrote:
Hi Srinath,
On 17-05-30 02:08 AM, Srinath Mannam wrote:
We found a concurrency issue in NVMe Init when we initialize
multiple NVMe connected over PCIe switch.
Setup details
| 6 +++---
drivers/char/hw_random/iproc-rng200.c | 1 +
3 files changed, 7 insertions(+), 4 deletions(-)
Acked-by: Scott Branden
Hi Bjorn,
On 17-10-25 10:23 AM, Bjorn Helgaas wrote:
[+cc Ray, Scott, Jon]
On Wed, Oct 25, 2017 at 11:28:07AM -0400, Jim Quinlan wrote:
On Tue, Oct 24, 2017 at 2:57 PM, Florian Fainelli wrote:
Hi Jim,
On 10/24/2017 11:15 AM, Jim Quinlan wrote:
This commit adds MSI to the Broadcom STB PCIe
allows us to do so. Please
suggest alternatives.
See patch for proposed bit define using ethtool.
Please comment on the best way to add reset support for Next-gen
NIC devices that contain an application processor (AP).
Scott Branden (1):
net: ethtool: add support for reset of AP inside NIC
Add ETH_RESET_AP to reset the application processor inside the NIC
interface.
Signed-off-by: Scott Branden
---
include/uapi/linux/ethtool.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 5bd1b1d..f927ab7 100644
--- a/include
Hi Andrew,
On 17-10-18 09:28 AM, Andrew Lunn wrote:
On Wed, Oct 18, 2017 at 09:01:35AM -0700, Scott Branden wrote:
Ethtool provides support for resetting other internal portions of the
NIC already. Seems appropriate to use one of the bits for resetting
the application processor (AP) for
Hi Andrew,
On 17-10-18 12:16 PM, Andrew Lunn wrote:
Yes, there is also a management processor.
O.K.
Maybe it would be nice to add some more text to the commit message to
make this clear. Define what an application processor is, and how it
differs from a management processor. But othersize:
OK
+net...@vger.kernel.org
On 17-10-18 02:30 PM, Andy Gospodarek wrote:
On Wed, Oct 18, 2017 at 12:31:28PM -0700, Scott Branden wrote:
Hi Andrew,
On 17-10-18 12:16 PM, Andrew Lunn wrote:
Yes, there is also a management processor.
O.K.
Maybe it would be nice to add some more text to the
+net...@vger.kernel.org
On 17-10-18 09:01 AM, Scott Branden wrote:
Add ETH_RESET_AP to reset the application processor inside the NIC
interface.
Signed-off-by: Scott Branden
---
include/uapi/linux/ethtool.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/uapi/linux/ethtool.h b
Hi Brian,
On 15-10-06 06:41 AM, Brian Norris wrote:
Is there a reason not to do this reset unconditionally? I recall this came up in
discussion previously, when the OpenWRT folks were trying to integrate with
BCMA, where this reset was one of the few differences between the platform-
device-ba
Patchset all look good.
Acked-by: Scott Branden
On 15-08-26 03:35 PM, Jon Mason wrote:
Changes in version 2 incorporate Olof's comments regarding:
* the removal of all "Reviewed-by" lines not occurring on external
mailing lists
* reordering of s-o-b lines
* modification of
toggle between
even and odd parity until the Transfer Complete interrupt is received.
Signed-off-by: Roman Bacik
Reviewed-by: Abhinav Ratna
Reviewed-by: Srinath Mannam
Signed-off-by: Scott Branden
---
drivers/usb/dwc2/core.h | 1 +
drivers/usb/dwc2/gadget.c | 51
This patch contains a fix for a real world interop problem found
when using the Synopsis DWC2 USB controller with isochronous audio as
detailed in the commit message.
Changes from v1:
- Address code review comments as per previous responses:
- renamed parity_set to has_correct_parity and reorder
Hi Jon,
Comment below.
On 15-10-12 11:19 AM, Jon Mason wrote:
On Fri, Oct 09, 2015 at 05:33:52PM -0700, Stephen Boyd wrote:
On 10/02, Jon Mason wrote:
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 23800a1..2790f21 100644
--- a/arch/arm64/Kconfig.platforms
+++
Hi Jon,
One question below.
On 15-10-10 07:42 AM, Hauke Mehrtens wrote:
On 10/03/2015 12:22 AM, Jon Mason wrote:
Add the 4708, 4709, and 953012k SVKs to the the documentation for the
Broadcom Northstar device tree bindings.
Signed-off-by: Jon Mason
---
Documentation/devicetree/bindings/arm
For BCM portion:
Acked-by: Scott Branden
On 15-10-13 07:18 AM, Javier Martinez Canillas wrote:
These drivers only have runtime but no build time dependencies so can be
built for testing purposes if the Kconfig COMPILE_TEST option is enabled.
This is useful to have more build coverage and
Hi Jon,
Yes, please only add SoC part number compatible strings, not board
compatible strings.
On 15-10-14 08:34 AM, Jon Mason wrote:
On Tue, Oct 13, 2015 at 03:37:49PM -0700, Florian Fainelli wrote:
On 13/10/15 14:40, Jon Mason wrote:
On Sat, Oct 10, 2015 at 04:42:04PM +0200, Hauke Mehrten
a platform that needs it is built
into the kernel.
COMMON_CLK_IPROC can be a silent option and selected as Arnd has done below.
Signed-off-by: Arnd Bergmann
Acked-by: Scott Branden
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 1319c3c14327..35234e563cd8 100644
---
Looks good.
On 15-10-15 11:14 AM, Jon Mason wrote:
ARM: BCM: Add SMP support for Broadcom 4708
Add SMP support for Broadcom's 4708 SoCs.
Signed-off-by: Jon Mason
Acked-by: Scott Branden
---
arch/arm/boot/dts/bcm4708.dtsi | 2 ++
arch/arm/boot/dts/bcm94708.dts | 2 +-
arch/arm/mac
Jon,
Can you add this to your patchset and change COMMON_CLK_IPROC to a
silent option?
On 15-10-14 01:16 PM, Arnd Bergmann wrote:
On Wednesday 14 October 2015 12:46:19 Scott Branden wrote:
My patch fixes it by always selecting COMMON_CLK_IPROC from
ARCH_BCM_CYGNUS. I wasn't sure wh
Jon,
One question below for others to comment on.
On 15-10-15 12:48 PM, Jon Mason wrote:
From: Arnd Bergmann
When CONFIG_CYGNUS is set but CONFIG_COMMON_CLK_IPROC is disabled, the
following link failures are caused:
drivers/built-in.o: In function `cygnus_armpll_init':
:(.init.text+0x1d290):
We need some sort of kconfig option to differentiate NS2 clock driver
from being pulled in all the time.
On 15-10-15 12:48 PM, Jon Mason wrote:
The Broadcom Northstar 2 SoC is architected under the iProc
architecture. It has the following PLLs: GENPLL SCR, GENPLL SW,
LCPLL DDR, LCPLL Ports, all
Jon,
Review below.
On 15-10-15 12:48 PM, Jon Mason wrote:
The Broadcom Northstar Plus SoC is architected under the iProc
Based on changes in Makefile below - should this be for Northstar and
Northstar Plus?
architecture. It has the following PLLs: ARMPLL, GENPLL, LCPLL0, all
derived from
On 15-10-15 01:52 PM, Hauke Mehrtens wrote:
On 10/15/2015 12:14 AM, Jon Mason wrote:
Add the 4708, 4709, and 953012k SVKs to the the documentation for the
Broadcom Northstar device tree bindings.
Signed-off-by: Jon Mason
---
Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt | 7
Hi Ray,
Comment at near end.
On 15-10-15 01:55 PM, Ray Jui wrote:
On 10/15/2015 1:40 PM, Scott Branden wrote:
We need some sort of kconfig option to differentiate NS2 clock driver
from being pulled in all the time.
On 15-10-15 12:48 PM, Jon Mason wrote:
The Broadcom Northstar 2 SoC is
On 15-10-15 02:15 PM, Ray Jui wrote:
On 10/15/2015 2:10 PM, Jon Mason wrote:
On Thu, Oct 15, 2015 at 02:04:09PM -0700, Scott Branden wrote:
Hi Ray,
Comment at near end.
On 15-10-15 01:55 PM, Ray Jui wrote:
On 10/15/2015 1:40 PM, Scott Branden wrote:
We need some sort of kconfig option
Hi Jon,
No need for the board in the compatible string.
On 15-10-16 02:41 PM, Hauke Mehrtens wrote:
On 10/16/2015 12:24 AM, Jon Mason wrote:
Add device tree files for Broadcom Northstar based SVKs. Since the
bcm5301x.dtsi already exists, all that is necessary is the dts files to
enable the UA
On 15-10-16 02:42 PM, Hauke Mehrtens wrote:
On 10/16/2015 12:24 AM, Jon Mason wrote:
Add the 4708, 4709, and 53012 SoCs to the the documentation for the
Broadcom Northstar device tree bindings.
Signed-off-by: Jon Mason
Acked-by: Hauke Mehrtens
Acked-by: Scott Branden
Hi Hauke,
On 15-10-16 03:42 PM, Hauke Mehrtens wrote:
On 10/17/2015 12:38 AM, Scott Branden wrote:
Hi Jon,
No need for the board in the compatible string.
I think the board should be named here, so we could take some code
branches based on the board, if it would have bad wiring for
Hi Jon,
comments inline.
On 15-10-22 12:25 PM, Jon Mason wrote:
Make the clocks visible options that can be selected by anyone. This
avoids the problems of:
1) Select is a reverse dependency and is hard for people to understand
and can sometimes be a pain to track down
This doesn't make
Hi Jon,
On 15-10-22 01:14 PM, Jon Mason wrote:
On Thu, Oct 22, 2015 at 12:46:46PM -0700, Scott Branden wrote:
Hi Jon,
comments inline.
On 15-10-22 12:25 PM, Jon Mason wrote:
Make the clocks visible options that can be selected by anyone. This
avoids the problems of:
1) Select is a
st coverage")
Link: https://lkml.kernel.org/r/20180612170229.ga10...@roeck-us.net
Reported-by: Guenter Roeck
Signed-off-by: Lorenzo Pieralisi
Cc: Scott Branden
Cc: Will Deacon
Cc: Bjorn Helgaas
Cc: Rob Herring
Cc: Russell King
Cc: Jan Kiszka
Cc: Guenter Roeck
Cc: Ley Foon Tan
---
v1 ->
ption for the DTB
loader")
Signed-off-by: Scott Branden
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f67e8d5..157cac9 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs
Hi Olof,
On 18-08-29 11:44 AM, Olof Johansson wrote:
Hi,
On Wed, Aug 29, 2018 at 10:21 AM, Scott Branden
wrote:
Enable EFI_ARMSTUB_DTB_LOADER to add support for the dtb= command line
parameter to function with efi loader.
Required to boot on existing bootloaders that do not support
:19: warning: Value stored to 'res'
during its initialization is never read
Signed-off-by: Colin Ian King
Acked-by: Scott Branden
---
sound/soc/bcm/cygnus-ssp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/bcm/cygnus-ssp.c b/sound/soc/bcm/cygnus-s
: Srinath Mannam
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
.../bindings/thermal/brcm,sr-thermal.txt | 25 ++
1 file changed, 25 insertions(+)
create mode 100644
Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
diff --git a/Documentation
On 18-09-27 11:59 AM, Rob Herring wrote:
On Thu, Sep 27, 2018 at 11:00:33AM -0700, Scott Branden wrote:
On 18-09-27 10:31 AM, Florian Fainelli wrote:
On 09/27/2018 10:27 AM, Rob Herring wrote:
On Thu, Sep 27, 2018 at 09:06:41PM +0530, Srinath Mannam wrote:
From: Pramod Kumar
Add
Péron
Reviewed-by: Florian Fainelli
Reviewed-by: Scott Branden
The "default ARCH_BCM_CYGNUS" could arguably cover ARCH_BCM_MOBILE as
well, but this is not probably worth a respin just to address that.
Yes, it's fine as is.
---
drivers/pwm/Kconfig | 4 +++-
1 file changed
Hi Lorenzo,
On 18-06-25 02:27 AM, Lorenzo Pieralisi wrote:
On Fri, Jun 22, 2018 at 11:59:08PM +0800, Ley Foon Tan wrote:
On Thu, 2018-06-21 at 22:08 -0700, Scott Branden wrote:
On 18-06-21 09:54 AM, Lorenzo Pieralisi wrote:
On Wed, Jun 20, 2018 at 10:07:33AM +0200, Jan Kiszka wrote:
On
Hi Rob,
Thanks for comment - reply inline.
On 18-06-13 12:31 PM, Florian Fainelli wrote:
On 06/12/2018 03:54 PM, Rob Herring wrote:
On Thu, Jun 7, 2018 at 12:53 PM, Scott Branden
wrote:
Hi Rob,
Could you please kindly comment on change below.
It allows board variants to be added easily
On 18-06-13 03:06 PM, Rob Herring wrote:
On Wed, Jun 13, 2018 at 2:18 PM, Scott Branden
wrote:
Hi Rob,
Thanks for comment - reply inline.
On 18-06-13 12:31 PM, Florian Fainelli wrote:
On 06/12/2018 03:54 PM, Rob Herring wrote:
On Thu, Jun 7, 2018 at 12:53 PM, Scott Branden
wrote:
Hi
Specify 1.8V EMMC capabilities for bcm958742k board to indicate support
for UHS mode.
Fixes: d4b4aba6be8a ("arm64: dts: Initial DTS files for Broadcom Stingray SOC")
Signed-off-by: Scott Branden
---
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts | 4
1 file changed, 4
Move remaining sata configuration to stingray-sata.dtsi and enable
ports based on NUM_SATA defined.
Now, all that needs to be done is define NUM_SATA per board.
Signed-off-by: Scott Branden
---
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 64
.../boot/dts/broadcom
registers is not probable.
Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Signed-off-by: Corneliu Doban
Signed-off-by: Scott Branden
---
drivers/mmc/host/sdhci-iproc.c | 30 +-
1 file changed, 25 insertions(+), 5 deletions(-)
diff --git a/d
Collection of bug fixes for sdhci-iproc driver.
- fix for 32bit writes for TRANSFER_MODE register by correcting shadow
register logic
- fix for deep sleep mode by adding SDHCI_QUIRK2_HOST_OFF_CARD_ON
- remove hard coded mmc capability of 1.8V to allow boards to be supported
that do support 1.8V.
ath Mannam
Signed-off-by: Scott Branden
Reviewed-by: Ray Jui
---
drivers/mmc/host/sdhci-iproc.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index 0ef741b..6f430da 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/
From: Corneliu Doban
The SDHCI_QUIRK2_HOST_OFF_CARD_ON is needed for the driver to
properly reset the host controller (reset all) on initialization
after exiting deep sleep.
Signed-off-by: Corneliu Doban
Signed-off-by: Scott Branden
Reviewed-by: Ray Jui
Reviewed-by: Srinath Mannam
Looks fine - thanks.
On 2018-12-20 9:19 a.m., Thierry Reding wrote:
From: Thierry Reding
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Cc: Vikram Prakash
Cc: Scott Branden
Cc: Florian Fainelli
Cc: Ray Jui
Signed-off-by: Thierry
On 2018-12-26 7:39 p.m., Srinath Mannam wrote:
Add ACPI support to bcm ocotp driver
This patch is based on Linux-4.20-rc7.
Signed-off-by: Srinath Mannam
Acked-by: Scott Branden
---
drivers/nvmem/bcm-ocotp.c | 37 -
1 file changed, 20 insertions
On 2018-12-20 5:34 p.m., Florian Fainelli wrote:
Add a binding document for the Broadcom STB reset controller, also known
as SW_INIT-style reset controller.
Signed-off-by: Florian Fainelli
---
.../devicetree/bindings/reset/brcm,reset.txt | 27 +++
1 file changed, 27 insert
On 2018-11-07 8:12 a.m., Uwe Kleine-König wrote:
On Wed, Nov 07, 2018 at 10:36:12AM +0100, Clément Péron wrote:
The Cygnus architecture use a Kona PWM. This is already present
in the device tree but can't be built actually. Hence, allow the
Kona PWM to be built for Cygnus arch.
Signed-off-by:
All Acked-by: Scott Branden
On 2018-10-16 8:11 a.m., Srinath Mannam wrote:
These patches adds the stingray thermal driver and its
corresponding DT nodes with documentation.
Changes from v4
- Addressed Rob Herring comments on DT parameters and
thermal driver architecture.
- Removed
-off-by: Scott Branden
---
drivers/mmc/core/card.h | 5 +
drivers/mmc/core/mmc.c| 4 ++--
drivers/mmc/core/quirks.h | 8
include/linux/mmc/card.h | 1 +
4 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h
index
driver also supports MSI
Signed-off-by: Ray Jui
Reviewed-by: Scott Branden
The driver looks suspiciously like the one that Hauke already submitted a
while ago for bcm53xx. Please come up with a merged driver that works for
both.
Could you please be a little more specific. What driver did
from this error, this change will avoid
the creation of partial erased blocks on reboot in the middle of a NAND erase
operation.
Signed-off-by: Brian Norris
Signed-off-by: Corneliu Doban
Signed-off-by: Scott Branden
---
drivers/mtd/mtdcore.c| 20
drivers/mtd/nand
Hi Brian,
I just sent out a new patch with your changes incorporated.
Thanks,
Scott
On 14-11-26 01:10 AM, Brian Norris wrote:
On Thu, Nov 20, 2014 at 11:18:05AM -0800, Scott Branden wrote:
Add nand_shutdown to wait for current nand operations to finish and prevent
further operations by
: Scott Branden
---
drivers/mmc/host/sdhci.c | 3 ++-
include/linux/mmc/sdhci.h | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ada1a3e..b37331f 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
Apologies: patch fails checkpatch due to spaces instead of tabs during
cut and paste.
But, please comment on this patch before I create a new version.
On 14-12-04 02:37 PM, Scott Branden wrote:
add (optional) reboot notifier field to struct mtd_info, and use it to
register a system reboot
: Scott Branden
---
drivers/mmc/host/sdhci.c | 3 ++-
include/linux/mmc/sdhci.h | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ada1a3e..b37331f 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
during initialization.
Signed-off-by: Tim Kryger
Acked-by: Scott Branden
---
drivers/pwm/core.c | 36
include/linux/pwm.h | 6 ++
2 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 966497d
On 15-01-14 05:02 PM, Dmitry Torokhov wrote:
Hi Jonathan,
On Fri, Dec 19, 2014 at 02:17:49PM -0800, Jonathan Richardson wrote:
+ if (of_property_read_u32(np, "scanning_period", &val) >= 0) {
+ if (val < 1 || val > 256) {
+ dev_err(dev, "scanning_period
ed-by: Lee Jones
Acked-by: Florian Fainelli
Acked-by: Gregory Fong
Acked-by: Stephen Warren
Signed-off-by: Scott Branden
---
.../arm/bcm/{brcm,bcm11351-cpu-method => brcm,bcm11351-cpu-method.txt}| 0
.../devicetree/bindings/arm/bcm/{bcm11351.txt => brcm,bcm11351.txt} | 0
Hi Mark,
On 15-03-30 11:43 PM, Mark Brown wrote:
On Mon, Mar 30, 2015 at 08:16:22PM -0700, Scott Branden wrote:
The audio PLL is embedded in the audio block and only used
by the audio block. The audio PLL registers are also in the middle of
the audio register map.
When you say it's
From: Lori Hikichi
Add device tree binding documentation for the Cygnus SOC audio block
Reviewed-by: Jonathan Richardson
Reviewed-by: Ray Jui
Signed-off-by: Scott Branden
Signed-off-by: Lori Hikichi
---
.../bindings/sound/brcm,cygnus-audio.txt | 68 ++
1 file
Please provide comments on the initial version of this driver.
This patchset contains the devicetree bindings and core audio driver
for the Cygnus SoC.
There is an open question on how to fit this driver into the clock
framework (if at all).
The audio PLL is embedded in the audio block and only
From: Lori Hikichi
The audio block has 4 serial ports. 3 ports are configurable as
either I2S or TDM. The 4th port is for SPDIF transmit.
This audio block is found on the bcm958305, bcm958300, and bcm911360.
Reviewed-by: Jonathan Richardson
Signed-off-by: Lori Hikichi
Signed-off-by: Scott
Hi Vinod, Jassi,
Some details on the problem encountered.
On 15-03-30 10:25 AM, Vinod Koul wrote:
On Mon, Mar 30, 2015 at 10:17:17PM +0530, Jassi Brar wrote:
On Fri, Mar 27, 2015 at 5:25 AM, Scott Branden wrote:
From: ismail
Update the thread running index before issuing the
GO command to
/dmatest/run
Next, in pl330.c add an mdelay in the _trigger function.
/* Only manager can execute GO */
_execute_DBGINSN(thrd, insn, true);
+ mdelay(1000);
thrd->req_running = idx;
On 15-03-30 10:20 PM, Jassi Brar wrote:
On Tue, Mar 31, 2015 at 9:10 AM, Sc
Hi Jonathan,
Patcheset looks good.
Acked-by: Scott Branden
On 15-04-10 11:58 AM, Jonathan Richardson wrote:
This patchset fixes a number of bugs in the Broadcom Kona pwm driver. It also
fixes a bug in the pwm core where the enabled state was incorrect on failed
calls to enable. Also, a new
Specify 1.8V EMMC capabilities for bcm958742t board to indicate support
for UHS mode.
Fixes: d4b4aba6be8a ("arm64: dts: Initial DTS files for Broadcom Stingray SOC")
Signed-off-by: Scott Branden
---
arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts | 4
1 file changed, 4
Move common board components from base bcm958742 dtsi file to new
stingray-board-base dtsi file so they can be shared between many stingray
boards following common design.
Signed-off-by: Scott Branden
---
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 35 +--
.../dts/broadcom
tell the watchdog framework. As a result, ping can be generated from
the watchdog framework, until the userspace watchdog daemon takes over
control
Signed-off-by: Ray Jui
Reviewed-by: Vladimir Olovyannikov
Reviewed-by: Scott Branden
---
drivers/watchdog/sp805_wdt.c | 22
Raym
On 18-05-23 09:29 AM, Ray Jui wrote:
Hi Robin,
On 5/23/2018 4:48 AM, Robin Murphy wrote:
On 23/05/18 08:52, Scott Branden wrote:
On 18-05-22 04:24 PM, Ray Jui wrote:
Hi Guenter,
On 5/22/2018 1:54 PM, Guenter Roeck wrote:
On Tue, May 22, 2018 at 11:47:18AM -0700, Ray Jui wrote:
If
Add otp device node for Stingray SOC.
Fixes: 2fa9e9e29ea2 ("arm64: dts: Add GPIO DT nodes for Stingray SOC")
Signed-off-by: Scott Branden
---
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/broadco
Hi Florian,
On 18-06-04 02:24 PM, Florian Fainelli wrote:
On 05/23/2018 01:17 PM, Scott Branden wrote:
Add otp device node for Stingray SOC.
Fixes: 2fa9e9e29ea2 ("arm64: dts: Add GPIO DT nodes for Stingray SOC")
Signed-off-by: Scott Branden
Applied to devicetree-arm64/next with
Hi Florian,
On 18-06-04 02:09 PM, Florian Fainelli wrote:
On 05/22/2018 11:55 AM, Scott Branden wrote:
Move common board components from base bcm958742 dtsi file to new
stingray-board-base dtsi file so they can be shared between many stingray
boards following common design.
Signed-off-by
On 18-06-04 02:33 PM, Florian Fainelli wrote:
On 06/04/2018 02:30 PM, Scott Branden wrote:
Hi Florian,
On 18-06-04 02:24 PM, Florian Fainelli wrote:
On 05/23/2018 01:17 PM, Scott Branden wrote:
Add otp device node for Stingray SOC.
Fixes: 2fa9e9e29ea2 ("arm64: dts: Add GPIO DT node
On 18-06-04 03:41 PM, Florian Fainelli wrote:
On 06/04/2018 03:33 PM, Scott Branden wrote:
On 18-06-04 02:33 PM, Florian Fainelli wrote:
On 06/04/2018 02:30 PM, Scott Branden wrote:
Hi Florian,
On 18-06-04 02:24 PM, Florian Fainelli wrote:
On 05/23/2018 01:17 PM, Scott Branden wrote
as Cygnus
is similar to the BCM58XX in most other functionalities.
Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags")
Signed-off-by: Arun Parameswaran
Acked-by: Scott Branden
---
drivers/net/dsa/b53/b53_common.c | 15 ++-
drivers/net/dsa/b53/b53_
Hi Clement,
On 18-06-06 02:34 AM, Clément Péron wrote:
From: Clément Peron
There is a HWRNG in Broadcom Cygnus SoC, so enable it.
Signed-off-by: Clément Peron
Thanks for upstreaming some missing Cygnus components.
But, the problem is the tarball release from Broadcom you are extracting
t
On 18-06-06 09:47 AM, Florian Fainelli wrote:
On 06/06/2018 09:03 AM, Scott Branden wrote:
Hi Clement,
On 18-06-06 02:34 AM, Clément Péron wrote:
From: Clément Peron
There is a HWRNG in Broadcom Cygnus SoC, so enable it.
Signed-off-by: Clément Peron
Thanks for upstreaming some
On 18-06-06 10:06 AM, Clément Péron wrote:
Hi Scott, Florian,
On Wed, 6 Jun 2018 at 18:47, Florian Fainelli wrote:
On 06/06/201 8 09:03 AM, Scott Branden wrote:
Hi Clement,
On 18-06-06 02:34 AM, Clément Péron wrote:
From: Clément Peron
There is a HWRNG in Broadcom Cygnus SoC, so
From: Mohamed Ismail Abdul Packir Mohamed
Enable the HW rng driver "iproc-rng200" for all cygnus platforms.
Signed-off-by: Mohamed Ismail Abdul Packir Mohamed
Reviewed-by: Ray Jui
Signed-off-by: Scott Branden
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 5 +
1 file changed, 5
On 2021-02-23 8:36 a.m., Florian Fainelli wrote:
>
>
> On 2/23/2021 8:01 AM, Álvaro Fernández Rojas wrote:
>> Some devices may need to perform a reset before using the RNG, such as the
>> BCM6368.
>>
>> Signed-off-by: Álvaro Fernández Rojas
>
> Since the reset is unique to the 6368, you may wan
Hi Greg,
On 2021-02-17 1:40 a.m., Greg Kroah-Hartman wrote:
> On Tue, Jan 26, 2021 at 07:51:18PM +0100, Greg Kroah-Hartman wrote:
>> On Tue, Jan 26, 2021 at 10:30:16AM -0800, Scott Branden wrote:
>>> Hi Greg,
>>>
>>>
>>> On 2021-01-25 11:29 p.m.,
On 2021-02-18 10:36 a.m., Greg Kroah-Hartman wrote:
> On Thu, Feb 18, 2021 at 07:20:50PM +0100, Willy Tarreau wrote:
>> On Thu, Feb 18, 2021 at 06:53:56PM +0100, Greg Kroah-Hartman wrote:
>>> On Thu, Feb 18, 2021 at 09:21:13AM -0800, Florian Fainelli wrote:
As a company, we are most likely sho
1 - 100 of 860 matches
Mail list logo
