From: Heiko Stuebner
[ Upstream commit 8a445086f8af0b7b9bd8d1901d6f306bb154f70d ]
The puma gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on th
From: Yu Kuai
[ Upstream commit 3ad7b4e8f89d6bcc9887ca701cf2745a6aedb1a0 ]
if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh
doesn't have a corresponding put_device(). Thus add a jump target to
fix the exception handling for this function implementation.
Fixes: 44fd8c7d4005
From: Finn Thain
[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ]
In the following sequence of calls, iop_do_send() gets called when the
"send" channel is not in the IOP_MSG_IDLE state:
iop_ism_irq()
iop_handle_send()
(msg->handler)()
From: Sagi Grimberg
[ Upstream commit 2875b0aecabe2f081a8432e2bc85b85df0529490 ]
commit fe35ec58f0d3 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue
From: Chengming Zhou
[ Upstream commit d9012a59db54442d5b2fcfdfcded35cf566397d3 ]
We shouldn't skip iocg when its abs_vdebt is not zero.
Fixes: 0b80f9866e6b ("iocost: protect iocg->abs_vdebt with iocg->waitq.lock")
Signed-off-by: Chengming Zhou
Acked-by: Tejun Heo
Signed-off-by: Jens Axboe
S
From: Cristian Marussi
[ Upstream commit e0f1a30cf184821499eeb67daedd7a3f21bbcb0b ]
When, at probe time, an SCMI communication failure inhibits the capacity
to query power domains states, such domains should be skipped.
Registering partially initialized SCMI power domains with genpd will
causes
From: Sagi Grimberg
[ Upstream commit 9f98772ba307dd89a3d17dc2589f213d3972fc64 ]
commit fe35ec58f0d3 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue
From: Tyler Hicks
[ Upstream commit 7f3d176f5f7e3f0477bf82df0f600fcddcdcc4e4 ]
Require that the TCG_PCR_EVENT2.digests.count value strictly matches the
value of TCG_EfiSpecIdEvent.numberOfAlgorithms in the event field of the
TCG_PCClientPCREvent event log header. Also require that
TCG_EfiSpecIdE
From: Colin Ian King
[ Upstream commit 9a5a85972c073f720d81a7ebd08bfe278e6e16db ]
Pointer mddev is being dereferenced with a test_bit call before mddev
is being null checked, this may cause a null pointer dereference. Fix
this by moving the null pointer checks to sanity check mddev before
it is
From: Niklas Söderlund
[ Upstream commit d344234abde938ae1062edb6c05852b0bafb4a03 ]
When adding the adv7180 device node the ports node was misspelled as
port, fix this.
Fixes: 8cae359049a88b75 ("ARM: dts: gose: add composite video input")
Signed-off-by: Niklas Söderlund
Link:
https://lore.ker
From: Dilip Kota
[ Upstream commit 661ccf2b3f1360be50242726f7c26ced6a9e7d52 ]
In full duplex mode, rx overflow error is observed. To overcome the error,
wait until the complete data got received and proceed further.
Fixes: 17f84b793c01 ("spi: lantiq-ssc: add support for Lantiq SSC SPI
controll
From: Lu Wei
[ Upstream commit 71fbe886ce6dd0be17f20aded9c63fe58edd2806 ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: ecc83e52b28c ("intel-hid: new hid event drive
From: Chen-Yu Tsai
[ Upstream commit e4dae01bf08b754de79072441c357737220b873f ]
The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns ou
From: Dmitry Vyukov
[ Upstream commit b36200f543ff07a1cb346aa582349141df2c8068 ]
rings_size() sets sq_offset to the total size of the rings (the returned
value which is used for memory allocation). This is wrong: sq array should
be located within the rings, not after them. Set sq_offset to where
From: Lu Wei
[ Upstream commit 64dd4a5a7d214a07e3d9f40227ec30ac8ba8796e ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: 332e081225fc ("intel-vbtn: new driver for Int
From: Tiezhu Yang
[ Upstream commit 4b127a14cb1385dd355c7673d975258d5d668922 ]
When call function devm_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Fixes: 9f1463b86c13 ("irqchip/ti-sci-inta: Add support for Interrupt Aggregator
driver")
S
From: Martin Wilck
[ Upstream commit 3f6e3246db0e6f92e784965d9d0edb8abe6c6b74 ]
Handle the special case where we have exactly one optimized path,
which we should keep using in this case.
Fixes: 75c10e732724 ("nvme-multipath: round-robin I/O policy")
Signed off-by: Martin Wilck
Signed-off-by: H
From: Stephan Gerhold
[ Upstream commit 1b6a1a162defe649c5599d661b58ac64bb6f31b6 ]
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-n
From: Finn Thain
[ Upstream commit 931fc82a6aaf4e2e4a5490addaa6a090d78c24a7 ]
When writing values to the IOP status/control register make sure those
values do not have any extraneous bits that will clear interrupt flags.
To place the SCC IOP into bypass mode would be desirable but this is not
a
From: Cristian Marussi
[ Upstream commit e0f1a30cf184821499eeb67daedd7a3f21bbcb0b ]
When, at probe time, an SCMI communication failure inhibits the capacity
to query power domains states, such domains should be skipped.
Registering partially initialized SCMI power domains with genpd will
causes
From: Heiko Stuebner
[ Upstream commit 7a7184f6cfa9279f1a1c10a1845d247d7fad54ff ]
The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.
While
From: Qiushi Wu
[ Upstream commit 17ed808ad243192fb923e4e653c1338d3ba06207 ]
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean u
From: Marek Szyprowski
[ Upstream commit ea9dd8f61c8a890843f68e8dc0062ce78365aab8 ]
Call exynos_cpu_power_up(cpunr) unconditionally. This is needed by the
big.LITTLE cpuidle driver and has no side-effects on other code paths.
The additional soft-reset call during little core power up has been a
From: Heiko Stuebner
[ Upstream commit 2300e6dab473e93181cf76e4fe6671aa3d24c57b ]
The lion gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on th
From: Tiezhu Yang
[ Upstream commit 4b127a14cb1385dd355c7673d975258d5d668922 ]
When call function devm_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Fixes: 9f1463b86c13 ("irqchip/ti-sci-inta: Add support for Interrupt Aggregator
driver")
S
From: Johannes Thumshirn
[ Upstream commit 1a1206dc4cf02cee4b5cbce583ee4c22368b4c28 ]
When we loose a device for whatever reason while (re)scanning zones, we
trip over a NULL pointer in blk_revalidate_zone_cb, like in the following
log:
sd 0:0:0:0: [sda] 3418095616 4096-byte logical blocks: (14
From: Peng Liu
[ Upstream commit 9b1b234bb86bcdcdb142e900d39b599185465dbb ]
During sched domain init, we check whether non-topological SD_flags are
returned by tl->sd_flags(), if found, fire a waning and correct the
violation, but the code failed to correct the violation. Correct this.
Fixes: 1
From: Jon Lin
[ Upstream commit 4294e4accf8d695ea5605f6b189008b692e3e82c ]
The RXFLR is possible larger than rx_left in Rockchip SPI, fix it.
Fixes: 01b59ce5dac8 ("spi: rockchip: use irq rather than polling")
Signed-off-by: Jon Lin
Tested-by: Emil Renner Berthing
Reviewed-by: Heiko Stuebner
From: Niklas Söderlund
[ Upstream commit d344234abde938ae1062edb6c05852b0bafb4a03 ]
When adding the adv7180 device node the ports node was misspelled as
port, fix this.
Fixes: 8cae359049a88b75 ("ARM: dts: gose: add composite video input")
Signed-off-by: Niklas Söderlund
Link:
https://lore.ker
From: Colin Ian King
[ Upstream commit 9a5a85972c073f720d81a7ebd08bfe278e6e16db ]
Pointer mddev is being dereferenced with a test_bit call before mddev
is being null checked, this may cause a null pointer dereference. Fix
this by moving the null pointer checks to sanity check mddev before
it is
From: Kees Cook
[ Upstream commit 47e33c05f9f07cac3de833e531bcac9ae052c7ca ]
When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong
direction flag set. While this isn't a big deal as nothing currently
enforces these bits in the kernel, it should be defined correctly. Fix
the def
From: Zenghui Yu
[ Upstream commit d1bd7e0ba533a2a6f313579ec9b504f6614c35c4 ]
Booting the latest kernel with DEBUG_ATOMIC_SLEEP=y on a GICv4.1 enabled
box, I get the following kernel splat:
[0.053766] BUG: sleeping function called from invalid context at
mm/slab.h:567
[0.053767] in_ato
From: Sagi Grimberg
[ Upstream commit 9f98772ba307dd89a3d17dc2589f213d3972fc64 ]
commit fe35ec58f0d3 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue
From: Tiezhu Yang
[ Upstream commit fa03587cad9bd32aa552377de4f05c50181a35a8 ]
In the function liointc_set_type(), we need to call the function
irq_gc_unlock_irqrestore() before returning.
Fixes: dbb152267908 ("irqchip: Add driver for Loongson I/O Local Interrupt
Controller")
Reported-by: Jian
From: Christian Hewitt
[ Upstream commit f1bb924e8f5b50752a80fa5b48c43003680a7b64 ]
Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
tuning errors on VIM3 after a few hours uptime:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution fai
From: Dmitry Vyukov
[ Upstream commit b36200f543ff07a1cb346aa582349141df2c8068 ]
rings_size() sets sq_offset to the total size of the rings (the returned
value which is used for memory allocation). This is wrong: sq array should
be located within the rings, not after them. Set sq_offset to where
From: Dejin Zheng
[ Upstream commit 308646785e51976dea7e20d29a1842d14bf0b9bd ]
kernel test robot reports a compile warning about REG_OFFSET redefined
in the reset-intel-gw.c after merging commit e44ab4e14d6f4 ("regmap:
Simplify implementation of the regmap_read_poll_timeout() macro"). the
warnin
From: Lu Wei
[ Upstream commit 71fbe886ce6dd0be17f20aded9c63fe58edd2806 ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: ecc83e52b28c ("intel-hid: new hid event drive
From: Niklas Söderlund
[ Upstream commit 59692ac5a7bb8c97ff440fc8917828083fbc38d6 ]
When adding the adv7612 device node the ports node was misspelled as
port, fix this.
Fixes: bc63cd87f3ce924f ("ARM: dts: gose: add HDMI input")
Signed-off-by: Niklas Söderlund
Link:
https://lore.kernel.org/r/2
From: Sudeep Holla
[ Upstream commit fcd2e0deae50bce48450f14c8fc5611b08d7438c ]
Currently we are not initializing the scmi clock with discrete rates
correctly. We fetch the min_rate and max_rate value only for clocks with
ranges and ignore the ones with discrete rates. This will lead to wrong
in
From: "Uladzislau Rezki (Sony)"
[ Upstream commit 594aa5975b9b5cfe9edaec06170e43b8c0607377 ]
It is possible that one of the channels cannot be detached
because its free channel is busy and previously queued data
has not been processed yet. On the other hand, another
channel can be successfully d
From: Tyler Hicks
[ Upstream commit 7f3d176f5f7e3f0477bf82df0f600fcddcdcc4e4 ]
Require that the TCG_PCR_EVENT2.digests.count value strictly matches the
value of TCG_EfiSpecIdEvent.numberOfAlgorithms in the event field of the
TCG_PCClientPCREvent event log header. Also require that
TCG_EfiSpecIdE
From: Gregory Herrero
[ Upstream commit ea0eada45632f4807b2f49de951072283e2d781c ]
Currently, if a section has a relocation to '_mcount' symbol, a new
__mcount_loc entry will be added whatever the relocation type is.
This is problematic when a relocation to '_mcount' is in the middle of a
sectio
From: Chen-Yu Tsai
[ Upstream commit 55b271af765b0e03d1ff29502f81644b1a3c87fd ]
The device tree currently only assigns the a supply for the first CPU
core, when in reality the regulator supply is shared by all four cores.
This might cause an issue if the implementation does not realize the
shari
From: Finn Thain
[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ]
In the following sequence of calls, iop_do_send() gets called when the
"send" channel is not in the IOP_MSG_IDLE state:
iop_ism_irq()
iop_handle_send()
(msg->handler)()
From: Dilip Kota
[ Upstream commit 661ccf2b3f1360be50242726f7c26ced6a9e7d52 ]
In full duplex mode, rx overflow error is observed. To overcome the error,
wait until the complete data got received and proceed further.
Fixes: 17f84b793c01 ("spi: lantiq-ssc: add support for Lantiq SSC SPI
controll
From: Marek Szyprowski
[ Upstream commit 9ff416cf45a08f28167b75045222c762a0347930 ]
Commit 1019fe2c7280 ("ARM: dts: exynos: Adjust bus related OPPs to the
values correct for Exynos5422 Odroids") changed the parameters of the
OPPs for the FSYS bus. Besides the frequency adjustments, it also remov
From: Cristian Marussi
[ Upstream commit e0f1a30cf184821499eeb67daedd7a3f21bbcb0b ]
When, at probe time, an SCMI communication failure inhibits the capacity
to query power domains states, such domains should be skipped.
Registering partially initialized SCMI power domains with genpd will
causes
From: Giovanni Cabiddu
[ Upstream commit 528f776df67c440361b2847b4da400d8754bf030 ]
Allow AES-XTS requests that are not multiple of the block size.
If a request is smaller than the block size, return -EINVAL.
This fixes the following issue reported by the crypto testmgr self-test:
alg: skcip
From: Ondrej Jirman
[ Upstream commit 86be5c789690eb08656b08c072c50a7b02bf41f1 ]
Some outputs from the RTL8723CS are connected to the PL port (BT_WAKE_AP),
which runs at 1.8V. When BT_WAKE_AP is high, the PL pin this signal is
connected to is overdriven, and the whole PL port's voltage rises
som
From: Alim Akhtar
[ Upstream commit b072714bfc0e42c984b8fd6e069f3ca17de8137a ]
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
alw
From: Johannes Thumshirn
[ Upstream commit 1a1206dc4cf02cee4b5cbce583ee4c22368b4c28 ]
When we loose a device for whatever reason while (re)scanning zones, we
trip over a NULL pointer in blk_revalidate_zone_cb, like in the following
log:
sd 0:0:0:0: [sda] 3418095616 4096-byte logical blocks: (14
From: Huacai Chen
[ Upstream commit ac62460c24126eb2442e3653a266ebbf05b004d8 ]
Loongson PCH PIC is a standard level triggered PIC, and it need to clear
interrupt during unmask.
Fixes: ef8c01eb64ca6719da449dab0 ("irqchip: Add Loongson PCH PIC controller")
Signed-off-by: Huacai Chen
Signed-off-b
From: Sagi Grimberg
[ Upstream commit 2875b0aecabe2f081a8432e2bc85b85df0529490 ]
commit fe35ec58f0d3 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue
From: Giovanni Gherdovich
[ Upstream commit 51beea8862a3095559862df39554f05042e1195b ]
There may be CPUs that support turbo boost but don't declare any turbo
ratio, i.e. their MSR_TURBO_RATIO_LIMIT is all zeroes. In that condition
scale-invariant calculations can't be performed.
Fixes: 1567c3e3
From: Giovanni Gherdovich
[ Upstream commit f4291df103315a696f0b8c4f45ca8ae773c17441 ]
Be defensive against the case where the processor reports a base_freq
larger than turbo_freq (the ratio would be zero).
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Signed-off-by:
From: Hannes Reinecke
[ Upstream commit fbd6a42d8932e172921c7de10468a2e12c34846b ]
When nvme_round_robin_path() finds a valid namespace we should be using it;
falling back to __nvme_find_path() for non-optimized paths will cause the
result from nvme_round_robin_path() to be ignored for non-optim
From: Heiko Stuebner
[ Upstream commit 8a445086f8af0b7b9bd8d1901d6f306bb154f70d ]
The puma gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on th
From: Zhenzhong Duan
[ Upstream commit 5d7f7d1d5e01c22894dee7c9c9266500478dca99 ]
The original code is a nop as i_mce.status is or'ed with part of itself,
fix it.
Fixes: a1300e505297 ("x86/ras/mce_amd_inj: Trigger deferred and thresholding
errors interrupts")
Signed-off-by: Zhenzhong Duan
Sig
From: Kan Liang
[ Upstream commit 2af834f1faab3f1e218fcbcab70a399121620d62 ]
When counting IMC uncore events on some TGL machines, an oops will be
triggered.
[ 393.101262] BUG: unable to handle page fault for address:
b45200e15858
[ 393.101269] #PF: supervisor read access in kernel mod
From: Heiko Stuebner
[ Upstream commit 7a7184f6cfa9279f1a1c10a1845d247d7fad54ff ]
The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.
While
From: Christophe JAILLET
[ Upstream commit c3d4eb3bf6ad32466555b31094f33a299444f795 ]
The call to tegra_bpmp_get() must be balanced by a call to
tegra_bpmp_put() in case of error, as already done in the remove
function.
Add an error handling path and corresponding goto.
Fixes: 52d15dd23f0b ("m
From: Tiezhu Yang
[ Upstream commit fa03587cad9bd32aa552377de4f05c50181a35a8 ]
In the function liointc_set_type(), we need to call the function
irq_gc_unlock_irqrestore() before returning.
Fixes: dbb152267908 ("irqchip: Add driver for Loongson I/O Local Interrupt
Controller")
Reported-by: Jian
From: Stephen Smalley
[ Upstream commit 382c2b5d23b4245f1818f69286db334355488dc4 ]
commit e3e0b582c321 ("selinux: remove unused initial SIDs and improve
handling") broke scripts/selinux/mdp since the unused initial SID names
were removed and the corresponding generation of policy initial SID
def
From: Colin Ian King
[ Upstream commit 9a5a85972c073f720d81a7ebd08bfe278e6e16db ]
Pointer mddev is being dereferenced with a test_bit call before mddev
is being null checked, this may cause a null pointer dereference. Fix
this by moving the null pointer checks to sanity check mddev before
it is
From: Tiezhu Yang
[ Upstream commit 4b127a14cb1385dd355c7673d975258d5d668922 ]
When call function devm_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Fixes: 9f1463b86c13 ("irqchip/ti-sci-inta: Add support for Interrupt Aggregator
driver")
S
From: Florian Fainelli
[ Upstream commit 9808357ff2e5bfe1e0dcafef5e78cc5b617a7078 ]
cpu_logical_map is only defined for CONFIG_SMP builds, when we are in an
UP configuration, the boot CPU is 0.
Fixes: 6468fc18b006 ("irqchip/irq-bcm7038-l1: Add PM support")
Reported-by: kernel test robot
Signed
From: Tiezhu Yang
[ Upstream commit dbec37048d27cee36e103e113b5f9b1852bfe997 ]
Check the return value of irq_domain_translate_onecell() due to
it may returns -EINVAL if failed.
Fixes: 818e915fbac5 ("irqchip: Add Loongson HyperTransport Vector support")
Signed-off-by: Tiezhu Yang
Signed-off-by:
From: Martin Wilck
[ Upstream commit 3f6e3246db0e6f92e784965d9d0edb8abe6c6b74 ]
Handle the special case where we have exactly one optimized path,
which we should keep using in this case.
Fixes: 75c10e732724 ("nvme-multipath: round-robin I/O policy")
Signed off-by: Martin Wilck
Signed-off-by: H
From: Dmitry Vyukov
[ Upstream commit b36200f543ff07a1cb346aa582349141df2c8068 ]
rings_size() sets sq_offset to the total size of the rings (the returned
value which is used for memory allocation). This is wrong: sq array should
be located within the rings, not after them. Set sq_offset to where
From: Brendan Higgins
[ Upstream commit 6816fe61bda8c819c368ad2002cd27172ecb79de ]
Commit ddbd60c779b4 ("kunit: use --build_dir=.kunit as default") changed
the default build directory for KUnit tests, but failed to update
associated unit tests for kunit_tool, so update them.
Fixes: ddbd60c779b4
From: Yu Kuai
[ Upstream commit 3ad7b4e8f89d6bcc9887ca701cf2745a6aedb1a0 ]
if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh
doesn't have a corresponding put_device(). Thus add a jump target to
fix the exception handling for this function implementation.
Fixes: 44fd8c7d4005
From: Finn Thain
[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ]
In the following sequence of calls, iop_do_send() gets called when the
"send" channel is not in the IOP_MSG_IDLE state:
iop_ism_irq()
iop_handle_send()
(msg->handler)()
From: yu kuai
[ Upstream commit f87a4f022c44e5b87e842a9f3e644fba87e8385f ]
if of_find_device_by_node() succeed, at91_pm_sram_init() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Fixes: d2e467905596 ("ARM: at91:
From: Yoshihiro Shimoda
[ Upstream commit a6cb262af1e1adfa6287cb43f09021ee42beb21c ]
Fix the device node names as "mmc@".
Fixes: 663386c3e1aa ("arm64: dts: renesas: r8a774a1: Add SDHI nodes")
Fixes: 9b33e3001b67 ("arm64: dts: renesas: Initial r8a774b1 SoC device tree")
Fixes: 77223211f44d ("arm
From: Dejin Zheng
[ Upstream commit 308646785e51976dea7e20d29a1842d14bf0b9bd ]
kernel test robot reports a compile warning about REG_OFFSET redefined
in the reset-intel-gw.c after merging commit e44ab4e14d6f4 ("regmap:
Simplify implementation of the regmap_read_poll_timeout() macro"). the
warnin
From: Tyler Hicks
[ Upstream commit 7f3d176f5f7e3f0477bf82df0f600fcddcdcc4e4 ]
Require that the TCG_PCR_EVENT2.digests.count value strictly matches the
value of TCG_EfiSpecIdEvent.numberOfAlgorithms in the event field of the
TCG_PCClientPCREvent event log header. Also require that
TCG_EfiSpecIdE
From: Serge Semin
[ Upstream commit affe93dd5b35bb0e7b0aa0505ae432dd0ac72c3f ]
It turns out having a Rx DMA channel serviced with higher priority than
a Tx DMA channel is not enough to provide a well balanced DMA-based SPI
transfer interface. There might still be moments when the Tx DMA channel
From: Dilip Kota
[ Upstream commit 661ccf2b3f1360be50242726f7c26ced6a9e7d52 ]
In full duplex mode, rx overflow error is observed. To overcome the error,
wait until the complete data got received and proceed further.
Fixes: 17f84b793c01 ("spi: lantiq-ssc: add support for Lantiq SSC SPI
controll
From: Chen-Yu Tsai
[ Upstream commit e4dae01bf08b754de79072441c357737220b873f ]
The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns ou
From: Alexandre Belloni
[ Upstream commit 7dbf4bbf1c320d82058878bd44805724d171e1e8 ]
Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY"), networking is broken on sama5d3 xplained.
The device tree has phy-mode = "rgmii" and this worked before, because
KSZ9031
From: Christian Hewitt
[ Upstream commit 2fa17dd09533d5d83201be3229a28c1010a8ea3e ]
Current devices using the W400 dtsi show mmc tuning errors:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[355
From: Niklas Söderlund
[ Upstream commit d344234abde938ae1062edb6c05852b0bafb4a03 ]
When adding the adv7180 device node the ports node was misspelled as
port, fix this.
Fixes: 8cae359049a88b75 ("ARM: dts: gose: add composite video input")
Signed-off-by: Niklas Söderlund
Link:
https://lore.ker
From: Patrick Delaunay
[ Upstream commit 4fe663890ac5b3b099f458b20cce13fe8efec12b ]
Move spi4_pins_a nodes from pinctrl_z to pinctrl as the associated pins
are not in BANK Z.
Fixes: 498a7014989d ("ARM: dts: stm32: Add missing pinctrl entries for
STM32MP15")
Signed-off-by: Patrick Delaunay
Re
From: Christian Hewitt
[ Upstream commit f1bb924e8f5b50752a80fa5b48c43003680a7b64 ]
Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
tuning errors on VIM3 after a few hours uptime:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution fai
From: Ondrej Jirman
[ Upstream commit 86be5c789690eb08656b08c072c50a7b02bf41f1 ]
Some outputs from the RTL8723CS are connected to the PL port (BT_WAKE_AP),
which runs at 1.8V. When BT_WAKE_AP is high, the PL pin this signal is
connected to is overdriven, and the whole PL port's voltage rises
som
From: Heiko Stuebner
[ Upstream commit 8a445086f8af0b7b9bd8d1901d6f306bb154f70d ]
The puma gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on th
From: Vincent Guittot
[ Upstream commit 3ea2f097b17e13a8280f1f9386c331b326a3dbef ]
With commit:
'b7031a02ec75 ("sched/fair: Add NOHZ_STATS_KICK")'
rebalance_domains of the local cfs_rq happens before others idle cpus have
updated nohz.next_balance and its value is overwritten.
Move the update
From: Cristian Marussi
[ Upstream commit e0f1a30cf184821499eeb67daedd7a3f21bbcb0b ]
When, at probe time, an SCMI communication failure inhibits the capacity
to query power domains states, such domains should be skipped.
Registering partially initialized SCMI power domains with genpd will
causes
From: Douglas Anderson
[ Upstream commit be24c6a71ecfbd9436ea1f496eb518a53e06368c ]
The write_tcs_reg_sync() may be called after timekeeping is suspended
so it's not OK to use ktime. The readl_poll_timeout_atomic() macro
implicitly uses ktime. This was causing a warning at suspend time.
Chang
From: Marek Szyprowski
[ Upstream commit ea9dd8f61c8a890843f68e8dc0062ce78365aab8 ]
Call exynos_cpu_power_up(cpunr) unconditionally. This is needed by the
big.LITTLE cpuidle driver and has no side-effects on other code paths.
The additional soft-reset call during little core power up has been a
From: Giovanni Gherdovich
[ Upstream commit f4291df103315a696f0b8c4f45ca8ae773c17441 ]
Be defensive against the case where the processor reports a base_freq
larger than turbo_freq (the ratio would be zero).
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Signed-off-by:
From: Luis Chamberlain
[ Upstream commit bad8e64fb19d3a0de5e564d9a7271c31bd684369 ]
On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash,
From: Stephan Gerhold
[ Upstream commit 1b6a1a162defe649c5599d661b58ac64bb6f31b6 ]
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-n
From: Gilad Ben-Yossef
[ Upstream commit 9bc6165d608d676f05d8bf156a2c9923ee38d05b ]
Fix a small resource leak on the error path of cipher processing.
Signed-off-by: Gilad Ben-Yossef
Fixes: 63ee04c8b491e ("crypto: ccree - add skcipher support")
Cc: Markus Elfring
Signed-off-by: Herbert Xu
Sig
From: Alim Akhtar
[ Upstream commit b072714bfc0e42c984b8fd6e069f3ca17de8137a ]
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
alw
From: Heiko Stuebner
[ Upstream commit 2300e6dab473e93181cf76e4fe6671aa3d24c57b ]
The lion gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on th
From: "Uladzislau Rezki (Sony)"
[ Upstream commit 594aa5975b9b5cfe9edaec06170e43b8c0607377 ]
It is possible that one of the channels cannot be detached
because its free channel is busy and previously queued data
has not been processed yet. On the other hand, another
channel can be successfully d
From: Heiko Stuebner
[ Upstream commit 7a7184f6cfa9279f1a1c10a1845d247d7fad54ff ]
The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.
While
From: Erwan Le Ray
[ Upstream commit f6b43d89d3b5a31bf4251a26c61e92bf659e74c5 ]
Fix usart and uart nodes ordering. Several usart nodes didn't respect
expecting ordering.
Fixes: 077e0638fc83 ("ARM: dts: stm32: Add alternate pinmux for USART2 pins on
stm32mp15")
Signed-off-by: Erwan Le Ray
Sig
301 - 400 of 453 matches
Mail list logo
