On 2106.04.09 20:45 Rafael J. Wysocki wrote:
>On Sat, Apr 9, 2016 at 6:39 PM, Mike Galbraith wrote:
>>
>> Hm, setting gov=performance, and taking the average of 3 30 second
>> interval PkgWatt samples as pipe-test runs..
>>
>> 714KHz/28.03Ws = 25.46
>> 877KHz/30.28Ws = 28.96
>>
>> ..for pipe-test,
Linus,
some bugfixes from I2C:
* fix a uevent triggered boot problem by removing a useless debug print
* fix sysfs-attributes of the new i2c-demux-pinctrl driver to follow
standard kernel behaviour
* fix a potential division-by-zero error (needed two takes)
Please pull.
Wolfram
The follo
Add support for using with both wl12xx and wl18xx.
- all wilink family needs special init command for entering wspi mode.
extra clock cycles should be sent after the spi init command while the
cs pin is high.
- switch to controling the cs pin from the spi driver for achieveing the
above.
- t
On Fri, Apr 08, 2016 at 03:02:09PM -0400, Javier Martinez Canillas wrote:
> Currently only the ondemand and performance CPUFreq policy governors are
> enabled in the Exynos defconfig. But the other governors are also useful
> for some cases, enable them to allow users change the default if needed.
On Fri, Apr 08, 2016 at 03:02:10PM -0400, Javier Martinez Canillas wrote:
> Currently only the ondemand and performance CPUFreq policy governors are
> enabled in multi_v7 defconfig. But the other governors are also useful
> for some cases, enable them to allow users change the default if needed.
>
On 2016/04/09 at 21:29, Peter Zijlstra wrote:
> On Sat, Apr 09, 2016 at 11:25:39AM +0800, Xunlei Pang wrote:
>
>>> In any case, I just realized we do not in fact provide this guarantee
>>> (of pointing to a blocked task) that needs a bit more work.
>> Current patch calls rt_mutex_adjust_prio() befo
On 04/10/2016, 05:36 AM, Peter Hurley wrote:
> noctty was removed as a parameter by commit 216513411937586
It is actually 11e1d4aa4da.
> ("tty: Consolidate noctty check in tty_open()").
>
> Signed-off-by: Peter Hurley
> ---
> drivers/tty/tty_io.c | 1 -
> 1 file changed, 1 deletion(-)
>
> dif
On Fri, Apr 08, 2016 at 08:17:21AM +0100, Lee Jones wrote:
> > Yes, this can be taken as is. Only second patch (changing defconfig)
> > depends on this. I can take the second patch through samsung tree but
> > that would require a tag/branch with this... which looks like an
> > overkill. So maybe y
From: Jiri Slaby
Since SLE12-SP1 is based upon 3.12 and its EOL is in 2017, move the
EOL of 3.12 to 2017 too.
Signed-off-by: Jiri Slaby
---
content/releases.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/content/releases.rst b/content/releases.rst
index 28ebf47834..144
On Sat, Apr 09, 2016 at 08:21:21PM -0700, Darren Hart wrote:
> On Thu, Apr 07, 2016 at 11:20:01PM +0300, Giedrius Statkevičius wrote:
> > `out' was assigned value but it was never used so remove it
> >
> > Signed-off-by: Giedrius Statkevičius
> > ---
> > drivers/platform/x86/asus-laptop.c | 3 --
Hi Linus,
Here are a couple of mmc fixes intended for v4.6 rc3 (or rc4 as I
guess it's late for rc3). It's based on v4.6 rc1.
Details are as usual found in the signed tag. Please pull this in!
Kind regards
Ulf Hansson
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
On Sun, 2016-04-10 at 05:44 +0200, Rafael J. Wysocki wrote:
> On Sat, Apr 9, 2016 at 6:39 PM, Mike Galbraith <
> umgwanakikb...@gmail.com> wrote:
> >
> > Hm, setting gov=performance, and taking the average of 3 30 second
> > interval PkgWatt samples as pipe-test runs..
> >
> > 714KHz/28.03Ws = 25
On Sat, 2016-04-09 at 15:05 -0400, Chris Mason wrote:
> This does preserve the existing logic to prefer idle cores over idle
> CPU threads, and includes some tests to try and avoid the idle scan when we're
> actually better off sharing a non-idle CPU with someone else.
My box says the "oh nevermi
Hi Mohammed,
On Sun, Apr 10, 2016 at 5:11 AM, wrote:
> From: Mohammed Billoo
>
> Remove unnecessary comments (highlighting sections of functions), make
> multiline comments into single line comments, and ensure that multiline
> comments adhere to coding style.
You need to add a signed-off-by l
If tb_drom_read fails sw->drom is freed but not set to NULL. sw->drom
is then freed again in the error path of sw_switch_alloc.
The bug can be triggered by unplugging a thunderbolt device shortly
after it is detected by the thunderbolt driver.
Signed-off-by: Andreas Noever
Cc: Lukas Wunner
Cc:
Hi Darren
Thanks for the ping.
On Sat, Apr 09, 2016 at 07:30:20PM -0700, Darren Hart wrote:
> On Thu, Mar 24, 2016 at 10:05:14PM +1030, Jonathan Woithe wrote:
> > This is a quick reply with preliminary information. I'll follow up in the
> > next few days with further details.
> >
> > On Tue, Ma
On 09/04/16 12:12, Slawomir Stepien wrote:
> On Apr 08, 2016 23:27, Slawomir Stepien wrote:
>> +static int ds1803_read_raw(struct iio_dev *indio_dev,
>> +struct iio_chan_spec const *chan,
>> +int *val, int *val2, long mask)
>> +{
>> +struct ds1803
On 08/04/16 22:27, Slawomir Stepien wrote:
> The following functions are supported:
> - write, read potentiometer value
> - potentiometer scale
>
> Datasheet: https://datasheets.maximintegrated.com/en/ds/DS1803.pdf
>
> Signed-off-by: Slawomir Stepien
Looks good to me, but as you pointed out a
The following functions are supported:
- write, read potentiometer value
- potentiometer scale
Datasheet: https://datasheets.maximintegrated.com/en/ds/DS1803.pdf
Signed-off-by: Slawomir Stepien
---
Changes since v2:
- Use array of u8 as a result type for i2c_master_recv() call
Changes since v
On 09/04/16 09:24, Cristina Moraru wrote:
> Add implementation for Maxim MAX5487, MAX5488, MAX5489
> digital potentiometers.
>
> Datasheet:
> http://datasheets.maximintegrated.com/en/ds/MAX5487-MAX5489.pdf
>
> Signed-off-by: Cristina Moraru
> CC: Daniel Baluta
Looks pretty good. A few nitpicks
From: Colin Ian King
ah is written twice with the same value, remove one of the
redundant assignments to ah.
Signed-off-by: Colin Ian King
---
drivers/net/wireless/ath/ath9k/init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/init.c
b/driv
On 10/04/16 12:23, Slawomir Stepien wrote:
> The following functions are supported:
> - write, read potentiometer value
> - potentiometer scale
>
> Datasheet: https://datasheets.maximintegrated.com/en/ds/DS1803.pdf
>
> Signed-off-by: Slawomir Stepien
Applied to the togreg branch of iio.git - i
Hi!
> > > wl1251 does not support AP mode, so there is no firmware for it in
> > > the tree.
> > >
> > > Regards,
> > > Yaniv
> >
> > Hi Yaniv! I read on some TI whitepaper, that wl1251 hardware supports
> > some Soft-AP mode. So I expect that either special FW is needed for it
> > or somehow
On 08/04/16 19:19, Andrew F. Davis wrote:
> The INA3221 is a three-channel, high-side current and bus voltage monitor
> with an I2C and SMBUS compatible interface.
>
> Signed-off-by: Andrew F. Davis
Hi Andrew,
My immediate thought on this one is whether it would be better off in hwmon.
I'm not c
On Sun, Apr 10, 2016 at 12:04:21PM +0200, Mike Galbraith wrote:
> On Sat, 2016-04-09 at 15:05 -0400, Chris Mason wrote:
>
> > This does preserve the existing logic to prefer idle cores over idle
> > CPU threads, and includes some tests to try and avoid the idle scan when
> > we're
> > actually be
Hi Cristina,
On 9 April 2016 at 10:24, Cristina Moraru wrote:
> Add implementation for Maxim MAX5487, MAX5488, MAX5489
> digital potentiometers.
>
> Datasheet:
> http://datasheets.maximintegrated.com/en/ds/MAX5487-MAX5489.pdf
>
> Signed-off-by: Cristina Moraru
> CC: Daniel Baluta
> ---
...
> +s
On Sun, 2016-04-10 at 08:35 -0400, Chris Mason wrote:
> What are you testing with? If it's two sockets or less I may be able to
> find one to reproduce with.
i4790 desktop box.
-Mike
On 10 April 2016 at 14:47, Joachim Eastwood wrote:
> Hi Cristina,
>
> On 9 April 2016 at 10:24, Cristina Moraru wrote:
>> Add implementation for Maxim MAX5487, MAX5488, MAX5489
>> digital potentiometers.
>>
>> Datasheet:
>> http://datasheets.maximintegrated.com/en/ds/MAX5487-MAX5489.pdf
>>
>> Si
On 07/04/16 20:48, Peter Meerwald-Stadler wrote:
>
>> This just adds support for reporting illuminance with default settings.
>>
>> All default registers are written on probe because the device otherwise
>> lacks a reset function.
>
> comments below
Mostly fine, but a few corners need cleaning up
From: Niu Yawei
Fixed several incorrect assumptions in 'enable-invariants'.
Signed-off-by: Niu Yawei
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3521
Reviewed-on: http://review.whamcloud.com/6832
Reviewed-by: Bobi Jam
Reviewed-by: Jinshan Xiong
Reviewed-by: Oleg Drokin
Signed-off-by:
From: Swapnil Pimpale
This patch has the following:
1) Fix for the return value from ptlrpcd_init(). It will now return a
correct status instead of returning zero always.
2) ptlrpcd_addref() should not increment ptlrpcd_users on error.
3) Added code in a mdc_setup() and mgc_setup() to test the
From: Bruno Faccini
Protect against race where lock could have been just destroyed
due to overlap, in ldlm_process_flock_lock().
Easy reproducer is BULL's NFS Locktests in pthread mode.
(http://nfsv4.bullopensource.org/tools/tests/locktest.php)
Signed-off-by: Bruno Faccini
Intel-bug-id: https:/
From: Jinshan Xiong
Otherwise it will hit the assertion at cl_lock.c:
cl_lock.c:1967:discard_cb())
ASSERTION( (!(page->cp_type == CPT_CACHEABLE) ||
(!PageWriteback(cl_page_vmpage(env, page ) failed:
This is because in osc_lock_flush() we have to make sure the IO
is finished before disc
From: Bruno Faccini
Since st_blocks = NULL is returned for released files, FIEMAP
should at least return a minimal mapping to make users aware
that file contains data but it is not immediately available.
This will make coreutils and tools such tar happy and have
them presume file is sparse.
Also
This is the last collection of missing fixes present in the
Lustre 2.5.0 release. Once these are merged the upstream
client will be equal to the pre-2.6 lustre version since the
major of clio cleanups from that time frame have already
landed.
Andrew Perepechko (3):
staging: lustre: llite: variab
From: John L. Hammond
In the MDC HSM handlers that do not pack a real suppgid, use -1 rather
than 0 for the suppgid in mdt_body.
Signed-off-by: John L. Hammond
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3866
Reviewed-on: http://review.whamcloud.com/7565
Reviewed-by: Aurelien Degremont
From: Andriy Skulysh
Patch for LU-631 which was landed before the upstream merge broke
OBD_STATFS_NODELAY behaviour. It adds unnecessary delay while
running df command with inactive OSTs. We shouldn't try to recover
connection to OST in this case.
Signed-off-by: Andriy Skulysh
Intel-bug-id: htt
From: Andrew Perepechko
This patch implements log2 using fls.
Signed-off-by: Andrew Perepechko
Reviewed-by: Alexander Boyko
Reviewed-by: alexander_zarochent...@xyratex.com
Reviewed-by: Vitaly Fertman
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3496
Xyratex-bug-id: MRP-999
Reviewed-on:
From: John L. Hammond
In the LL_IOC_HSM_CT_START case of ll_dir_ioctl() require
CAP_SYS_ADMIN, since the local handler for this ioctl may modify the
global KUC table.
Signed-off-by: John L. Hammond
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3866
Reviewed-on: http://review.whamcloud.com
From: Jeff Mahoney
On ppc64 with 64k pages, we get a build failure in lloop:
drivers/staging/lustre/lustre/llite/lloop.c:527:2:
note: in expansion of macro 'CLASSERT'
CLASSERT(PAGE_CACHE_SIZE < (1 << (sizeof(unsigned short) * 8)));
There's no need to change the queue's logical block size. Even
On 07/04/16 17:21, Crestez Dan Leonard wrote:
> The proximity sensor relies on sending pulses to an external IR led and
> it is disabled by default on powerup. The driver will enable it with a
> default power setting.
>
> Signed-off-by: Crestez Dan Leonard
One trivial point inline...
> ---
> dri
From: Jinshan Xiong
Truncate up is safe so it won't trigger restore.
Copy optimization for truncate down - only copy the part under
truncate length. If a file is truncated to zero usually it'll be
followed by write so I choose to restore the file and set correct
stripe information.
Signed-off-b
From: Bruno Faccini
Follow-on to patch introduced to fix LU-2665 ticket (Gerrit
Change at http://review.whamcloud.com/6415 with Change-Id:
I8faa331712abeadee46eabe111ee1c23a05840d5).
Original patch introduced regressions against POSIX test suite
(fcntl.18/fcntl.35 tests in LSB-VSX POSIX test suit
From: Jinshan Xiong
The root cause is that when max_cache_mb conf parameter is applied,
the client isn't connected to the OST yet so that sbi->ll_dt_exp is
NULL. However, it's not necessary to shrink the cache memory in this
case so success should be returned.
Signed-off-by: Jinshan Xiong
Intel
On Thu, Mar 31, 2016 at 10:28 PM, Aubrey Li wrote:
> Currently the optional IPC resources prevent telemetry driver from
> probing if these resources are not in ACPI table. This patch decouples
> telemetry driver from these optional resources, so that telemetry driver
> has dependency only on the n
On 07/04/16 17:21, Crestez Dan Leonard wrote:
> This is exposed as an output channel with "led" as an extend_name.
>
> Other sensors also have support for controlling an external LED. It's
> not clear that simply exposing an undecorated output channel is the
> correct approach.
Agreed that this is
From: Sebastien Buisson
Fix 'data race condition' defects found by Coverity version 6.5.0:
Data race condition (MISSING_LOCK)
Accessing variable without holding lock. Elsewhere,
this variable is accessed with lock held.
This patch is dedicated to code fragments involving oap_lock.
Signed-off-
From: Andrew Perepechko
With the patch 6648 a fee variables were renamed. We do these
renames in broken out patch to the fix obvious.
Signed-off-by: Andrew Perepechko
Reviewed-by: Alexander Boyko
Reviewed-by: Vitaly Fertman
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3473
Xyratex-bug-
From: Andrew Perepechko
Assume dchild argument is fully initialized in ->unlink and
->rmdir callbacks, so additional lookup for ELC is not needed.
Signed-off-by: Andrew Perepechko
Reviewed-by: Alexander Boyko
Reviewed-by: Vitaly Fertman
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3473
From: Bobi Jam
If we specify multiple --mgsnode for a MDT, when we start MDS upon
it while MGS is no the other node, the MGC import connection will
always select the local nid (which is one of the candidate mgsnode)
since it think its the closest connection.
This patch treats further --mgsnode n
On 07/04/16 17:21, Crestez Dan Leonard wrote:
> This patch exposes ALSTIM as illuminance_integration_time and ALSPGA as
> illuminance_scale.
>
> Changing ALSTIM also changes the number of bits available in the data
> register.
Hmm.. This usually means we have oversampling going on rather than stra
This patch was shown not to work. I just haven't removed it from opensuse yet.
-Jeff
--
Jeff Mahoney
(apologies for the top post -- from my mobile)
> On Apr 10, 2016, at 9:13 AM, James Simmons wrote:
>
> From: Jeff Mahoney
>
> On ppc64 with 64k pages, we get a build failure in lloop:
>
> dr
On 07/04/16 17:21, Crestez Dan Leonard wrote:
> Signed-off-by: Crestez Dan Leonard
> ---
> drivers/iio/light/max44000.c | 63
>
> 1 file changed, 63 insertions(+)
>
> diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c
> index e4
Grigori Goronzy wrote:
> Changing the LCR register after initialization does not seem to be
> reliable on all chips (particularly not on CH341A). Restructure
> initialization and configuration to always reinit the chip on
> configuration changes instead and pass the LCR register value directly
> t
On 07/04/16 06:33, Marek Szyprowski wrote:
> Hello,
>
> On 2016-04-06 22:33, Alison Schofield wrote:
>> On Wed, Apr 06, 2016 at 09:03:00AM +0200, Marek Szyprowski wrote:
>>> Hello,
>>>
>>> On 2016-04-06 07:15, Alison Schofield wrote:
Driver includes struct regmap and struct device in its glob
On 2016/4/10 21:17, Andy Shevchenko wrote:
> On Thu, Mar 31, 2016 at 10:28 PM, Aubrey Li wrote:
>> Currently the optional IPC resources prevent telemetry driver from
>> probing if these resources are not in ACPI table. This patch decouples
>> telemetry driver from these optional resources, so that
Looks fine,
Reviewed-by: Sagi Grimberg
On 06/04/16 08:35, Joachim Eastwood wrote:
> Hi Alison,
>
> On 6 April 2016 at 07:18, Alison Schofield wrote:
>> Driver includes struct regmap and struct device in its global data.
>> Remove the struct device and use regmap API to retrieve device info.
>>
>> Patch created using Coccinelle plus ma
On 06/04/16 06:16, Alison Schofield wrote:
> Driver includes struct regmap and struct device in its global data.
> Remove the struct device and use regmap API to retrieve device info.
>
> Patch created using Coccinelle plus manual edits.
>
> Signed-off-by: Alison Schofield
This has the same issu
On 06/04/16 06:17, Alison Schofield wrote:
> Driver includes struct regmap and struct device in its global data.
> Remove the struct device and use regmap API to retrieve device info.
>
> Patch created using Coccinelle plus manual edits.
>
> Signed-off-by: Alison Schofield
Another one where the
On 06/04/16 22:06, Lars-Peter Clausen wrote:
> On 04/06/2016 06:11 AM, Alison Schofield wrote:
>> Replace the code that guarantees the device stays in direct mode with
>> iio_device_{claim|release}_direct_mode() which does same.
>>
>> Signed-off-by: Alison Schofield
>
> Looks good, thanks.
>
> A
On 06/04/16 19:06, Lars-Peter Clausen wrote:
> On 04/03/2016 11:09 AM, Jonathan Cameron wrote:
>> On 01/04/16 17:53, Alison Schofield wrote:
>>> Two instances are moved to the new claim/release API:
>>>
>>> In the first instance, the driver was using mlock followed by
>>> iio_buffer_enabled(). Repl
From: Chen Gang
Macro HUGETLBFS_SB is clearer enough, so one statement is clearer than
3 lines statements.
Remove redundant return statements for non-return functions, which can
save lines, at least.
Signed-off-by: Chen Gang
---
include/linux/hugetlb.h| 4 +---
include/linux/hugetlb_c
From: Chen Gang
It is used as a pure bool function within kernel source wide.
Signed-off-by: Chen Gang
---
include/linux/hugetlb.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index e44c578..0f735ea 100644
--- a/inc
> This patch was shown not to work. I just haven't removed it from opensuse yet.
Its been running in our production tree as well for some time. Guess that
change is a noop. In any case we have been discussing redoing the lloop
driver anyways. Just need to find the cycles.
> --
> Jeff Mahoney
>
On 06/04/16 15:58, Laxman Dewangan wrote:
> Hi Daniel,
>
>
> On Wednesday 06 April 2016 07:19 PM, Daniel Baluta wrote:
>> On Wed, Apr 6, 2016 at 1:31 PM, Laxman Dewangan wrote:
>>> Some of kernel driver uses the IIO framework to get the sensor
>>> value via ADC or IIO HW driver. The client drive
- On Apr 8, 2016, at 5:25 PM, Linus Torvalds torva...@linux-foundation.org
wrote:
> On Fri, Apr 8, 2016 at 10:46 AM, Mathieu Desnoyers
> wrote:
>>
>> By the way, the debugger can always decide to single-step through the
>> first iteration of the rseq, and then after it loops, decide to skip
On 06/04/16 11:31, Laxman Dewangan wrote:
> Some of kernel driver uses the IIO framework to get the sensor
> value via ADC or IIO HW driver. The client driver get iio channel
> by iio_channel_get() and release it by calling iio_channel_release().
>
> Add resource managed version (devm_*) of these
On 03/04/16 12:51, Peter Rosin wrote:
> On 2016-04-03 12:51, Jonathan Cameron wrote:
>> On 03/04/16 09:52, Peter Rosin wrote:
>>> From: Peter Rosin
>>>
>>> Allocate an explicit i2c mux core to handle parent and child adapters
>>> etc. Update the select/deselect ops to be in terms of the i2c mux co
On 2016年04月08日 15:47, Peter Zijlstra wrote:
> On Fri, Apr 08, 2016 at 02:41:46PM +0800, Pan Xinhui wrote:
>> From: pan xinhui
>>
>> Implement xchg{u8,u16}{local,relaxed}, and
>> cmpxchg{u8,u16}{,local,acquire,relaxed}.
>>
>> Atomic operation on 8-bit and 16-bit data type is supported from power7
On 05/04/16 14:03, Richard Leitner wrote:
> If i2c_device_id *id is NULL and acpi_match_device returns NULL too,
> then chipset may be unitialized when accessing &ak_def_array[chipset] in
> ak8975_probe. Therefore initialize chipset to AK_MAX_TYPE, which will
> return an error when not changed.
>
On 04/04/16 19:21, Crestez Dan Leonard wrote:
> These chips has an almost identical interface but a deal with a
> different number of value bits. Datasheet links for comparison:
>
> * http://www.ti.com/lit/ds/symlink/adc081c021.pdf
> * http://www.ti.com/lit/ds/symlink/adc101c021.pdf
> * http://
On 04/04/16 19:21, Crestez Dan Leonard wrote:
> Using this requires software triggers like CONFIG_IIO_HRTIMER_TRIGGER.
>
> The device can be configured to do internal periodic sampling but does not
> offer some sort of interrupt on data ready. Interrupts can only trigger when
> values get out of a
On 06/04/16 15:58, Daniel Baluta wrote:
> BMI160 is an Inertial Measurement Unit (IMU) which provides acceleration
> and angular rate measurement. It also offers a secondary I2C interface
> for connecting a magnetometer sensor (usually BMM160).
>
> Current driver offers support for accelerometer a
> The lloop driver should be removed entirely - use the loop driver
> instead.
I talked with Andreas last week at our annual Lustre users group meeting
about this. The reason I was told for existance is that some users were
using files on a Lustre file system with the loop back device. The
perf
On 06/04/16 11:16, zengzhao...@163.com wrote:
> From: Zhaoxiu Zeng
>
> Signed-off-by: Zhaoxiu Zeng
Applied to the togreg branch of iio.git as you seem to have addressed
Lars' comments.
Thanks,
Jonathan
> ---
> drivers/iio/gyro/adxrs450.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletion
On Sun, Apr 10, 2016 at 03:37:42PM +0100, James Simmons wrote:
>
> > The lloop driver should be removed entirely - use the loop driver
> > instead.
>
> I talked with Andreas last week at our annual Lustre users group meeting
> about this. The reason I was told for existance is that some users we
On Sun, 2016-04-10 at 11:35 +0200, Mike Galbraith wrote:
> On Sun, 2016-04-10 at 05:44 +0200, Rafael J. Wysocki wrote:
> > On Sat, Apr 9, 2016 at 6:39 PM, Mike Galbraith <
> > umgwanakikb...@gmail.com> wrote:
> > >
> > > Hm, setting gov=performance, and taking the average of 3 30 second
> > > inte
Does NVMe really force ATO=1? Sorry, didn't have much time to spend
with that part of the spec.
On 04/10/2016 04:37 PM, Jonathan Cameron wrote:
> On 06/04/16 11:16, zengzhao...@163.com wrote:
>> From: Zhaoxiu Zeng
>>
>> Signed-off-by: Zhaoxiu Zeng
> Applied to the togreg branch of iio.git as you seem to have addressed
> Lars' comments.
The whole series needs to go through the same tree sin
On 10/04/16 15:41, Lars-Peter Clausen wrote:
> On 04/10/2016 04:37 PM, Jonathan Cameron wrote:
>> On 06/04/16 11:16, zengzhao...@163.com wrote:
>>> From: Zhaoxiu Zeng
>>>
>>> Signed-off-by: Zhaoxiu Zeng
>> Applied to the togreg branch of iio.git as you seem to have addressed
>> Lars' comments.
>
On 10/04/16 16:13, Jonathan Cameron wrote:
> On 10/04/16 15:41, Lars-Peter Clausen wrote:
>> On 04/10/2016 04:37 PM, Jonathan Cameron wrote:
>>> On 06/04/16 11:16, zengzhao...@163.com wrote:
From: Zhaoxiu Zeng
Signed-off-by: Zhaoxiu Zeng
>>> Applied to the togreg branch of iio.git
On 04/10/2016 04:57 AM, Jonathan Cameron wrote:
On 08/04/16 19:19, Andrew F. Davis wrote:
The INA3221 is a three-channel, high-side current and bus voltage monitor
with an I2C and SMBUS compatible interface.
Signed-off-by: Andrew F. Davis
Hi Andrew,
My immediate thought on this one is whethe
Hi!
I was helping somebody write some documentation about meminfo and
I started explaining that memory values are mostly multiples of
1024 and that binary prefixes are preferred. The output of
/proc/meminfo is hardcoded to be in 'kB' which should mean 1000
bytes (one kilobytes). But judging by t
Current values are based on multiples of 1024 (powers of 2)
which means that the values in meminfo are not kilobytes
(1000 bytes) but kibibytes (1024 bytes). The correct
prefix for that would be 'Ki' so the output should be 'KiB'.
Signed-off-by: Alexandru Juncu
---
fs/proc/meminfo.c | 90 +++
Hi Rob,
On Tue, Mar 29, 2016 at 01:50:35PM -0500, Rob Herring wrote:
> On Tue, Mar 29, 2016 at 12:33:14PM +0200, Maxime Ripard wrote:
> > Hi Rob,
> >
> > On Fri, Mar 25, 2016 at 09:11:18AM -0500, Rob Herring wrote:
> > > On Wed, Mar 23, 2016 at 05:38:36PM +0100, Maxime Ripard wrote:
> > > > The d
Hi Stephen, Mike,
On Wed, Mar 23, 2016 at 05:38:24PM +0100, Maxime Ripard wrote:
> The composite clock didn't have any unregistration function, which forced
> us to use clk_unregister directly on it.
>
> While it was already not great from an API point of view, it also meant
> that we were leakin
On Sun, Apr 10, 2016 at 03:04:51PM +0100, James Simmons wrote:
>
> > This patch was shown not to work. I just haven't removed it from opensuse
> > yet.
>
> Its been running in our production tree as well for some time. Guess that
> change is a noop. In any case we have been discussing redoing t
On Sat, 2016-04-09 at 14:31 +0200, Rafael J. Wysocki wrote:
> On Sat, Apr 9, 2016 at 1:07 PM, Peter Zijlstra
> wrote:
> > On Fri, Apr 08, 2016 at 10:59:59PM +0200, Rafael J. Wysocki wrote:
> > > On Friday, April 08, 2016 08:50:54 AM Mike Galbraith wrote:
> > > > On Fri, 2016-04-08 at 08:45 +0200,
Arnd,
On 02/03/2016 at 11:22:04 +0100, Geert Uytterhoeven wrote :
> On Wed, Mar 2, 2016 at 10:48 AM, Arnd Bergmann wrote:
> > Every new architecture has to add itself to the growing list of those
> > that do not support the legacy PC RTC driver.
> >
> > This replaces the long list of architecture
> > > This patch was shown not to work. I just haven't removed it from opensuse
> > > yet.
> >
> > Its been running in our production tree as well for some time. Guess that
> > change is a noop. In any case we have been discussing redoing the lloop
> > driver anyways. Just need to find the cyc
> On Sun, Apr 10, 2016 at 03:37:42PM +0100, James Simmons wrote:
> >
> > > The lloop driver should be removed entirely - use the loop driver
> > > instead.
> >
> > I talked with Andreas last week at our annual Lustre users group meeting
> > about this. The reason I was told for existance is tha
Hi,
your commit 'sched/cpuacct: Split usage accounting into user_usage and
sys_usage' in -next causes crashes with several of my qemu tests (mac99,
q3beige). Reverting the patch fixes the problem.
Details and complete logs are available at
http://kerneltests.org/builders/qemu-ppc-next
The
Fastest existing Bluetooth standard's top speed is 2.4 MB/s.
It is way off from being CPU limited, no need to squeeze
last few cycles by excessive inlining.
This patch delinlines the following functions:
hci_conn_hash_lookup_handle: 345 bytes, 39 calls
hci_conn_hash_lookup_ba: 372 bytes, 36 calls
Hi,
On Wed, Mar 16, 2016 at 02:19:48PM +0100, Nicolas Ferre wrote:
> This is a series to add driver for a new Atmel Shutdown Controller. This new
> IP
> is extensible and some features will be added later (see the TODO section).
> Its extensible nature led to write a new binding so that wake-up s
Hi,
On Fri, Mar 18, 2016 at 08:40:16AM +0300, Dan Carpenter wrote:
> We were freeing "info->battery" instead of "info->usb", which leads to
> an OOps and a resource leak.
>
> The labels were wonky, "out_battery" did release the battery but out_usb
> did not release usb. I was introducing a call
Hi,
On Fri, Mar 18, 2016 at 12:00:51PM +0300, Dan Carpenter wrote:
> We accidentally free "micro_ac_power" which is an error pointer and it
> leads to an oops. We intended to free "micro_batt_power".
Thanks, queued.
-- Sebastian
signature.asc
Description: PGP signature
Hi,
On Wed, Apr 06, 2016 at 10:32:25AM +0800, YH Huang wrote:
> POWER_SUPPLY_STATUS_NOT_CHARGING is used for AC connected, but
> battery not charging (e.g. because battery temperature is out
> of acceptable range).
>
> When battery is charging near dry and BATTERY_FULL_DISCHARGED is set,
> it is
On Sun, 2016-04-10 at 18:24 +0200, Denys Vlasenko wrote:
> Fastest existing Bluetooth standard's top speed is 2.4 MB/s.
> It is way off from being CPU limited, no need to squeeze
> last few cycles by excessive inlining.
>
> This patch delinlines the following functions:
>
> hci_conn_hash_lookup_h
Schönen Tag
Dies ist die Santander Consumer Finance, wir Darlehen Zinssatz von 2% für beide
Unternehmen Darlehen und persönliche Darlehen bieten für Ihr Projekt und die
individuellen Bedürfnisse
Füllen Sie das Formular aus, wenn interessiert
Vollständiger Name:
Geschlecht:
Land:
Erforderliche
1 - 100 of 814 matches
Mail list logo
