Few doc-style comments were missing, add them. Rearrange another one to
match the sequence within the structure.
Signed-off-by: Viresh Kumar
---
drivers/base/power/opp/opp.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/o
In Processor Clocking Control specification v1.0 ,there are 2 definitions:
2.1.8 Minimum Time Between Commands
2.1.9 Maximum Time Between Commands
that means 2 commands' interval should be located between Minimum Time Between
Commands and Maximum Time Between Commands.
3.1 Get Average Frequency
OPP bindings allow a platform to enable OPPs based on the version of the
hardware they are used for.
Add support to the OPP-core to parse these bindings, by introducing
dev_pm_opp_{set|put}_supported_hw() APIs.
Signed-off-by: Viresh Kumar
---
drivers/base/power/opp/core.c | 153
OPP bindings (for few properties) allow a platform to choose a
value/range among a set of available options. The options are present as
opp--, where the platform needs to supply the string.
The OPP properties which allow such an option are: opp-microvolt and
opp-microamp.
Add support to the OPP-
> So maybe add some wrapper that does a pr_info then
> a pr_debug for the second and subsequent uses like:
>
That seems like a bad idea - one might be tricked into think that one
saw the current data, but the actually current data is later hidden.
johannes
--
To unsubscribe from this list: send
This is to add the pinctrl dependency for Marvell Berlin SoCs.
Signed-off-by: Jisheng Zhang
Acked-by: Sebastian Hesselbarth
Acked-by: Antoine Tenart
Acked-by: Linus Walleij
---
this small patch is missed:
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-October/378638.html
arch/ar
Hi Arnd,
> On Monday 16 November 2015 12:06:10 Masahiro Yamada wrote:
> > Many ARM sub-architectures use prompts followed by "if" conditional,
> > but it is wrong.
> >
> > Please notice the difference between
> >
> > config ARCH_FOO
> > bool "Foo SoCs" if ARCH_MULTI_V7
> >
> > an
when getting cpu frequency failures, it will retry 2 times at most.
Signed-off-by: Pearson, Greg
Signed-off-by: Zhang, Lin-Bao
---
drivers/cpufreq/pcc-cpufreq.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
index c
The eMMC is non-removable so is marked with the non-removable DT
property to avoid having to redetect it after a suspend/resume.
But it also has the broken-cd property which is wrong since only
one of the DT properties for card detection should be used
Signed-off-by: Jisheng Zhang
---
arch/arm/
On Fri, Nov 13, 2015 at 11:52:30AM -0800, Guenter Roeck wrote:
> On 11/09/2015 04:11 PM, Andrew Chew wrote:
> >If we need to restart the watchdog due to someone changing the timeout
> >interval, stop the watchdog before restarting it. Otherwise, the new
> >timeout doesn't seem to take.
> >
> >Sign
Hi Jon,
On Mon, Nov 16, 2015 at 11:34 AM, Jon Hunter wrote:
> On 16/11/15 09:49, Geert Uytterhoeven wrote:
>> On Mon, Nov 16, 2015 at 10:46 AM, Jon Hunter wrote:
>>> On 13/11/15 20:01, Thomas Gleixner wrote:
On Fri, 13 Nov 2015, Jon Hunter wrote:
> On 12/11/15 23:20, Kevin Hilman wrote:
The default interrupt-parent has been set in the upper layer, apb@e8
and apb@fc for example. So if the interrupt-parent isn't changed, we
don't need to set it again. This patch removes the dumplicated
interrupt-parent settings.
Signed-off-by: Jisheng Zhang
---
arch/arm/boot/dts/berlin2q.
On Mon, Nov 16, 2015 at 08:45:34AM +0100, Pavel Machek wrote:
> > > Ok, so SND_SOC_DAPM_REGULATOR_SUPPLY() does not work, because I have
> > > two regulators, right? Is there similar macro I can use?
> > No? What would make you say that?
> Plus, I'd expect to see some kind of "struct device" ar
On Mon, Nov 16, 2015 at 07:32:20PM +0900, Minchan Kim wrote:
> On Mon, Nov 16, 2015 at 10:45:22AM +0200, Kirill A. Shutemov wrote:
> > On Mon, Nov 16, 2015 at 10:45:21AM +0900, Minchan Kim wrote:
> > > During the test with MADV_FREE on kernel I applied your patches,
> > > I couldn't see any problem
On Mon, Nov 16, 2015 at 09:56:32AM +0100, Boris Brezillon wrote:
> +++ b/drivers/regulator/pwm-regulator.c
> @@ -56,7 +56,7 @@ static int pwm_regulator_set_voltage_sel(struct
> regulator_dev *rdev,
> int dutycycle;
> int ret;
>
> - pwm_reg_period = pwm_get_period(drvdata->pwm);
Commit-ID: 836d525baada26e1a7462e87805337b9a9b729f6
Gitweb: http://git.kernel.org/tip/836d525baada26e1a7462e87805337b9a9b729f6
Author: Kamal Mostafa
AuthorDate: Wed, 11 Nov 2015 14:25:33 -0800
Committer: Arnaldo Carvalho de Melo
CommitDate: Thu, 12 Nov 2015 10:48:16 -0300
tools: Actual
Commit-ID: f6ba98c5dc78708cb7fd29950c4a50c4c7e88f95
Gitweb: http://git.kernel.org/tip/f6ba98c5dc78708cb7fd29950c4a50c4c7e88f95
Author: Kamal Mostafa
AuthorDate: Wed, 11 Nov 2015 14:25:34 -0800
Committer: Arnaldo Carvalho de Melo
CommitDate: Thu, 12 Nov 2015 18:58:10 -0300
tools: Add a
Commit-ID: 866548dd6e22c3795ae5146a9746a5cf659698f1
Gitweb: http://git.kernel.org/tip/866548dd6e22c3795ae5146a9746a5cf659698f1
Author: Adrian Hunter
AuthorDate: Fri, 6 Nov 2015 15:59:29 +0200
Committer: Arnaldo Carvalho de Melo
CommitDate: Thu, 12 Nov 2015 18:58:17 -0300
perf symbols:
Commit-ID: fae00650f7910da7064f45d49c95df88fab816f6
Gitweb: http://git.kernel.org/tip/fae00650f7910da7064f45d49c95df88fab816f6
Author: Arnaldo Carvalho de Melo
AuthorDate: Thu, 12 Nov 2015 15:59:26 -0300
Committer: Arnaldo Carvalho de Melo
CommitDate: Thu, 12 Nov 2015 18:58:17 -0300
pe
Commit-ID: b7f294b58adb02d928dccb04bd39cb789db09e1f
Gitweb: http://git.kernel.org/tip/b7f294b58adb02d928dccb04bd39cb789db09e1f
Author: Arnaldo Carvalho de Melo
AuthorDate: Thu, 12 Nov 2015 16:01:56 -0300
Committer: Arnaldo Carvalho de Melo
CommitDate: Thu, 12 Nov 2015 18:58:18 -0300
pe
This patch fix some spelling typos found in Documentation/gpio.
Signed-off-by: Masanari Iida
---
Documentation/gpio/consumer.txt| 4 ++--
Documentation/gpio/driver.txt | 6 +++---
Documentation/gpio/drivers-on-gpio.txt | 6 +++---
3 files changed, 8 insertions(+), 8 deletions(-)
Add or fix the optional clock property, then remove the CLK_IGNORE_UNUSED
flag for sdio clk(s).
This is a partialy resend of
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-October/379457.html
patch3, patch4 has been merged.
Since v1:
- remove the "mmc: sdhci-pxav3: fix optional clo
Add the optional 2nd clock for BG2Q's sdhci0 and sdhci1. This would let the
clock be disabled during runtime pm, so saves power a bit.
Signed-off-by: Jisheng Zhang
---
arch/arm/boot/dts/berlin2q.dtsi | 6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/berl
The optional 2nd clock is CLKID_SDIO.
Signed-off-by: Jisheng Zhang
---
arch/arm/boot/dts/berlin2q.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 155430a..145dd33 100644
--- a/arch/arm/boot/dts/berli
On Monday 16 November 2015 10:16:35 Joseph Myers wrote:
> On Sun, 15 Nov 2015, Chris Metcalf wrote:
>
> > I've added Rich, Paul, Joseph, and Mike to the cc's as they are probably
> > a good subset of libc-alpha to help comment on these issues. My sense
> > is that right now, it wouldn't be poss
On Fri, Nov 13, 2015 at 10:05 PM, Julia Lawall wrote:
> These v4l2_ctrl_ops structures are never modified, like all the other
> v4l2_ctrl_ops structures, so declare them as const.
>
> Done with the help of Coccinelle.
>
> Signed-off-by: Julia Lawall
>
Acked-by: Lad, Prabhakar
Cheers,
--Prabhak
This patch fix some spelling typos in Documentation/ioctl.
Signed-off-by: Masanari Iida
---
Documentation/ioctl/botching-up-ioctls.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/ioctl/botching-up-ioctls.txt
b/Documentation/ioctl/botching-up-ioctls.tx
On Mon, Nov 16, 2015 at 10:32:51AM +, yamada.masah...@socionext.com wrote:
> Hi Arnd,
>
>
> > On Monday 16 November 2015 12:06:10 Masahiro Yamada wrote:
> > > Many ARM sub-architectures use prompts followed by "if" conditional,
> > > but it is wrong.
> > >
> > > Please notice the difference
On 16 November 2015 at 10:07, Maruthi Srinivas Bayyavarapu
wrote:
> Drivers which can be built as loadable module needs
> symbol - pm_genpd_add_device to be exported. Those drivers
> create platform devices which comes under a powerdomain.
Currently this API is used by a few SoCs that haven't yet
Hi Robert,
On 13/11/15 08:31, Robert Baldyga wrote:
> Hi Felipe,
>
> On 11/10/2015 06:52 PM, Felipe F. Tonello wrote:
>> This patch fixes a memory leak that occurs when an endpoint fails to enqueue
>> the request. If that happens the complete function will never be called, thus
>> never freeing t
f93178291712 dmaengine: bcm2835-dma: Fix memory leak when stopping a
running transfer
Fixed the memleak, but introduced another issue: the terminate_all callback
might be called with interrupts disabled and the dma_free_coherent() is
not allowed to be called when IRQs are disabled.
Co
On Sun, 2015-11-15 at 05:42 -0800, Guenter Roeck wrote:
> On 11/14/2015 05:45 PM, Ben Hutchings wrote:
> > This is the start of the stable review cycle for the 3.2.73
> > release.
> > There are 60 patches in this series, which will be posted as
> > responses
> > to this one. If anyone has any issu
On Mon, Nov 16, 2015 at 10:24:45AM +, Tvrtko Ursulin wrote:
>
> Hi,
>
> On 15/11/15 13:32, Chris Wilson wrote:
> >When waiting for high frequency requests, the finite amount of time
> >required to set up the irq and wait upon it limits the response rate. By
> >busywaiting on the request compl
On Mon, 16 Nov 2015, Arnd Bergmann wrote:
> Let's not get into the tv_nsec discussion today, that is not thankfully
> not relevant for arm64 any more at this point. The system call ABI for
> arm64/ilp32 is now the same as for any other 32-bit architecture using
> the generic ABI, the question we'r
Enable wdt0 on the Google Chromecast to make use of the watchdog
functionality.
Signed-off-by: Jisheng Zhang
---
arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
b/arch/arm/boot/dts/berlin2c
Enable wdt0 on the Marvell BG4CT STB board to make use of the watchdog
functionality.
Signed-off-by: Jisheng Zhang
---
arch/arm64/boot/dts/marvell/berlin4ct-stb.dts | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
b/arch/arm64/boot/dts/marvel
Enable wdt0 on Marvell Berlin BG2 based Sony NSZ-GS7 to make use of the
watchdog functionality.
Signed-off-by: Jisheng Zhang
---
arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
b/arch/arm/boot/dts/berlin
The Marvell Berlin BG2Q has 3 watchdogs which are compatible with the
snps,dw-wdt driver sit in the sysmgr domain. This patch adds the
corresponding device tree nodes.
Signed-off-by: Jisheng Zhang
---
arch/arm/boot/dts/berlin2q.dtsi | 24
1 file changed, 24 insertions(+)
The Marvell Berlin BG4CT has 3 watchdogs which are compatible with the
snps,dw-wdt driver sit in the sysmgr domain. This patch adds the
corresponding device tree nodes.
Signed-off-by: Jisheng Zhang
---
arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 24
1 file changed, 24 i
Enable wdt0 on the Marvell BG2Q DMP board to make use of the watchdog
functionality.
Signed-off-by: Jisheng Zhang
---
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
b/arch/arm/boot/dts/berlin2q-marvel
The Marvell Berlin BG2CD has 3 watchdogs which are compatible with the
snps,dw-wdt driver sit in the sysmgr domain. This patch adds the
corresponding device tree nodes.
NOTE: although BG2CD doesn't have a HW sysmgr, but the sysmgr domain
exists.
Signed-off-by: Jisheng Zhang
---
arch/arm/boot/dt
The Marvell Berlin BG2 has 3 watchdogs which are compatible with the
snps,dw-wdt driver sit in the sysmgr domain. This patch adds the
corresponding device tree nodes.
Signed-off-by: Jisheng Zhang
---
arch/arm/boot/dts/berlin2.dtsi | 24
1 file changed, 24 insertions(+)
In Marvell berlin SoCs, there are watchdogs which are compatible with the
snps,dw-wdt driver. This series try to add watchdog support for them.
Jisheng Zhang (8):
arm: dts: berlin2q: add watchdog nodes
arm: dts: berlin2cd: add watchdog nodes
arm: dts: berlin2: add watchdog nodes
arm64: dts
On Thu, Nov 12, 2015 at 4:35 PM, Matias Bjørling wrote:
> The max_phys_sect variable is defined as a char. We do a boundary check
> to maximally allow 256 physical page descriptors per command. As we are
> not indexing from zero. This expression is always in false. Bump the
> max_phys_sect to an u
On 11/16/2015 12:18 PM, Thiago Farina wrote:
On Thu, Nov 12, 2015 at 4:35 PM, Matias Bjørling wrote:
The max_phys_sect variable is defined as a char. We do a boundary check
to maximally allow 256 physical page descriptors per command. As we are
not indexing from zero. This expression is always
On Mon, Nov 16, 2015 at 09:54:10AM +, Tvrtko Ursulin wrote:
>
> Hi,
>
> On 15/11/15 13:32, Chris Wilson wrote:
> >The busywait in __i915_spin_request() does not respect pending signals
> >and so may consume the entire timeslice for the task instead of
> >returning to userspace to handle the s
On 13/10/15 09:34, Catalin Marinas wrote:
On Mon, Oct 12, 2015 at 06:52:56PM +0300, Andrey Ryabinin wrote:
Andrey Ryabinin (3):
arm64: move PGD_SIZE definition to pgalloc.h
arm64: add KASAN support
Documentation/features/KASAN: arm64 supports KASAN now
Linus Walleij (1):
ARM64: kasa
From: Markus Elfring
Date: Mon, 16 Nov 2015 12:23:23 +0100
The dma_pool_destroy() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring
---
On 15 November 2015 at 14:53, Fu, Zhonghui wrote:
> Now, PM core supports asynchronous suspend/resume mode for devices
> during system suspend/resume, and the power state transition of one
> device may be completed in separate kernel thread. PM core ensures
> all power state transition timing depe
On Sunday 15 November 2015 16:58:33 Grant Zhang wrote:
>
> Have you tried the two patches Eric mentioned? One of my 4.1.11 server
> just hanged with very similar stack trace and I am wondering whether the
> aforementioned patches would help.
Sorry, Grant - I'm sticking to 3.14.xx for now.
best r
Am 14.11.2015 um 00:46 schrieb EXT Kees Cook:
On Fri, Nov 13, 2015 at 4:10 AM, Wiebe, Wladislav (Nokia - DE/Ulm)
wrote:
Some architectures has there reserved RAM in 64 Bit address space.
Therefore converting mem_address module parameter to ullong.
Signed-off-by: Wladislav Wiebe
If this wor
On Wed, Oct 28, 2015 at 04:02:54PM -0500, Konstantin Shkolnyy wrote:
> cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped.
> However, SET_LINE_CTL functions properly. When the driver tries to modify
> the register, it reads it, modifies some bits and writes back. Because the
> re
On 16/11/15 11:22, Chris Wilson wrote:
On Mon, Nov 16, 2015 at 09:54:10AM +, Tvrtko Ursulin wrote:
Hi,
On 15/11/15 13:32, Chris Wilson wrote:
The busywait in __i915_spin_request() does not respect pending signals
and so may consume the entire timeslice for the task instead of
returning t
Hi Clemens,
On 13/11/15 08:11, Clemens Ladisch wrote:
> Felipe Ferreri Tonello wrote:
>> On 10/11/15 18:43, Sergei Shtylyov wrote:
>>> On 11/10/2015 08:52 PM, Felipe F. Tonello wrote:
@@ -75,6 +75,7 @@ struct f_midi {
struct usb_ep*in_ep, *out_ep;
struct snd_card
On 11/13/15, Laura Abbott wrote:
> Hi,
>
> There seem to be section mismatches coming from head_64.S
>
> WARNING: vmlinux.o(.text+0x8994): Section mismatch in reference from the
> variable __boot_from_prom to the function .init.text:prom_init()
> The function __boot_from_prom() references
> the fu
On Monday 16 November 2015 11:12:08 Joseph Myers wrote:
> On Mon, 16 Nov 2015, Arnd Bergmann wrote:
>
> > Let's not get into the tv_nsec discussion today, that is not thankfully
> > not relevant for arm64 any more at this point. The system call ABI for
> > arm64/ilp32 is now the same as for any ot
The firmware can support PSCI-1.0 in fact. This change also enables
suspend to ram on Marvell berlin arm64 SoC.
Signed-off-by: Jisheng Zhang
---
arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dt
On 11/16/2015 12:08 PM, Felipe Ferreri Tonello wrote:
> Hi Robert,
>
> On 13/11/15 08:31, Robert Baldyga wrote:
>> Hi Felipe,
>>
>> On 11/10/2015 06:52 PM, Felipe F. Tonello wrote:
>>> This patch fixes a memory leak that occurs when an endpoint fails to enqueue
>>> the request. If that happens the
for_each_available_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.
A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):
//
@@
expression root,e;
local idexpression c
for_each_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.
A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):
//
@@
expression root,e;
local idexpression child;
@@
for_each_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.
A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):
//
@@
expression root,e;
local idexpression child;
@@
for_each_available_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.
A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):
//
@@
expression root,e;
local idexpression c
The various for_each device_node iterators performs an of_node_get on each
iteration, so a break out of the loop requires an of_node_put.
The complete semantic patch that finds this problem is
(http://coccinelle.lip6.fr):
//
@r@
local idexpression n;
expression e1,e2;
iterator name for_each_node
This patch fix some typos in Documentation/filesystems/f2fs.txt
Signed-off-by: Masanari Iida
---
Documentation/filesystems/f2fs.txt | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/filesystems/f2fs.txt
b/Documentation/filesystems/f2fs.txt
index b102b43..
for_each_available_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.
A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):
//
@@
expression root,e;
local idexpression c
for_each_available_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.
A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):
//
@@
expression root,e;
local idexpression c
for_each_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.
A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):
//
@@
expression root,e;
local idexpression child;
@@
[...]
>> Ahh, I see.
>>
>> It seems like a reasonable assumption that the controller can't cope
>> with a higher clock rate than 100 MHz as "input" clock. That would
>> then mean that there are different versions of the controller, as it
>> seems like for some version it's fine with 200MHz and for
On Sat, Nov 14, 2015 at 07:38:19PM +0100, Enric Balletbo i Serra wrote:
> The MPEG Source (MS) InfoFrame is in EIA/CEA-861B. It describes aspects of
> the compressed video stream that were used to produce the uncompressed
> video.
>
> The patch adds functions to work with MPEG InfoFrames.
>
> Sig
From: Markus Elfring
Date: Mon, 16 Nov 2015 12:46:41 +0100
The kfree_skb() function tests whether its argument is NULL and then
returns immediately. Thus the test around the calls is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring
---
driver
> On Wed, Nov 11, 2015 at 12:03:39PM +0530, Bharat Kumar Gogada wrote:
> > Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.
> >
> > Signed-off-by: Bharat Kumar Gogada
> > Signed-off-by: Ravi Kiran Gummaluri
>
> I acked v7. Please add acks when sending a new version.
Hi Rob,
I'm sorr
On Mon, 16 Nov 2015, Arnd Bergmann wrote:
> There are two separate aspects here:
>
> a) leave out the support for all __off_t based syscalls (__ftruncate,
>__lseek, __lxstat, __pread, __preadv, __pwrite, __pwritev, __truncate,
>__xstat) as they are no longer needed, and change the handlin
On 16/11/15 11:12, Chris Wilson wrote:
On Mon, Nov 16, 2015 at 10:24:45AM +, Tvrtko Ursulin wrote:
Hi,
On 15/11/15 13:32, Chris Wilson wrote:
When waiting for high frequency requests, the finite amount of time
required to set up the irq and wait upon it limits the response rate. By
busyw
DAX handling of COW faults has wrong locking sequence:
dax_fault does i_mmap_lock_read
do_cow_fault does i_mmap_unlock_write
Ross's commit[1] missed a fix[2] that Kirill added to Matthew's
commit[3].
Original COW locking logic was introduced by Matthew here[4].
This should be app
On 11/13/2015 10:54 PM, Martin K. Petersen wrote:
>> "Lee" == Lee Duncan writes:
>
>>> Well, I'm a bit worried about the loss of a monotonically increasing
>>> host number from the debugging perspective. Right now, if you look
>>> at any log, hostX always refers to one and only one incarnati
On Fri 2015-11-13 10:59:34, Josh Poimboeuf wrote:
> On Fri, Nov 13, 2015 at 02:54:42PM +0100, Petr Mladek wrote:
> > On Thu 2015-11-12 13:19:17, Josh Poimboeuf wrote:
> > > On Thu, Nov 12, 2015 at 03:31:58PM +0100, Petr Mladek wrote:
> > > > On Wed 2015-11-11 11:57:31, Josh Poimboeuf wrote:
> > > >
On Fri, 13 Nov 2015, Jessica Yu wrote:
> +++ Miroslav Benes [13/11/15 13:46 +0100]:
> > On Fri, 13 Nov 2015, Miroslav Benes wrote:
> >
> > > As for load_info, I don't have a strong opinion whether to keep it for all
> > > modules or for livepatch modules only.
> >
> > I have. We cannot keep it,
On Monday 16 November 2015 12:03:09 Joseph Myers wrote:
> On Mon, 16 Nov 2015, Arnd Bergmann wrote:
>
> > There are two separate aspects here:
> >
> > a) leave out the support for all __off_t based syscalls (__ftruncate,
> >__lseek, __lxstat, __pread, __preadv, __pwrite, __pwritev, __truncate
On Mon 2015-11-16 16:07:26, Viresh Kumar wrote:
> Few doc-style comments were missing, add them. Rearrange another one to
> match the sequence within the structure.
>
> Signed-off-by: Viresh Kumar
Acked-by: Pavel Machek
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
h
Hello,
On Thu, Nov 12, 2015 at 08:46:21AM +0100, LABBE Corentin wrote:
> of_match_device could return NULL, and so cause a NULL pointer
> dereference later.
>
> Signed-off-by: LABBE Corentin
> ---
> drivers/tty/serial/imx.c | 6 --
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff
Hello.
On 11/15/2015 5:29 PM, Saurabh Sengar wrote:
for checking if a property is present or not,
of_property_read_bool is more appropriate then of_get_property()
s/then/than/.
Signed-off-by: Saurabh Sengar
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscr
On Thu, Nov 12, 2015 at 10:58:48AM +0100, Marcus Folkesson wrote:
> clk_prepare/unprapare APIs are not allowed in atomic context, so
> move prepare/unprepare to probe/remove and use clk_enable/disable
> instead.
>
> Signed-off-by: Marcus Folkesson
Do you see a problem? I don't claim your patch i
Hi Geert,
On 15/11/15 21:04, Geert Uytterhoeven wrote:
If max_pfn is not initialized, the block layer may use wrong DMA masks.
Replace open-coded shifts by PFN_DOWN() while we're at it.
Signed-off-by: Geert Uytterhoeven
---
Compile-tested only.
---
arch/m68k/kernel/setup_no.c | 9 ++---
From: Markus Elfring
Date: Mon, 16 Nov 2015 13:12:25 +0100
The kfree_skb() function tests whether its argument is NULL and then
returns immediately. Thus the test around the calls is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring
---
driver
On Fri, 13 Nov 2015, Jessica Yu wrote:
> +++ Miroslav Benes [13/11/15 13:56 +0100]:
> > On Fri, 13 Nov 2015, Miroslav Benes wrote:
> >
> > > I agree this seems like the best approach. So if we preserve
> > > mod_arch_syminfo (in case of s390) we should free it not in
> > > module_finalize, but so
Hi Mark,
On Mon, 16 Nov 2015 10:55:58 +
Mark Brown wrote:
> On Mon, Nov 16, 2015 at 09:56:32AM +0100, Boris Brezillon wrote:
>
> > +++ b/drivers/regulator/pwm-regulator.c
> > @@ -56,7 +56,7 @@ static int pwm_regulator_set_voltage_sel(struct
> > regulator_dev *rdev,
> > int dutycycle;
>
Hi!
> > > Every single sound driver gets this right, none of them assume the name
> > > is global. What makes you say that they assume names are global?
>
> > Ok, so you are saying that if I fix mfd initialization, sound will
> > automagically switch from global regulators to device-specific
> >
Well, I missed the merge window because I wasn't paying close enough
attention.
These changes are small and one fixes a moderately significant bug.
They have
been in linux-next for a while without issue.
The following changes since commit 8005c49d9aea74d382f474ce11afbbc7d7130bec:
Linux 4.4-rc
Hi,
On Sun, Nov 15, 2015 at 5:51 PM, Simon Arlott wrote:
> Add device tree binding for the BCM63168 interrupt controller.
Well, that's what I get for waiting for -rc1, I also planned to submit
irqchip drivers[1] for bcm63xx/bmips for the next window ;p.
>
> This controller is similar to the SM
On Mon, 16 Nov 2015, Arnd Bergmann wrote:
> > It's not a matter of leaving anything out - these would simply use 64-bit
> > off_t (__off_t and __off64_t would be the same type) and the *64 versions
> > would be aliases, exactly the same as on 64-bit architectures. (And
> > _FILE_OFFSET_BITS ha
From: Markus Elfring
Date: Mon, 16 Nov 2015 13:30:37 +0100
The dma_pool_destroy() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring
---
f2fs_sb_info::s_kobj should be released in error path of fill_super,
otherwise it will lead to memory leak.
This bug was found by kmemleak:
dmesg:
kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
cat /sys/kernel/debug/kmemleak
unreferenced object 0x8800838dc358 (size 8
On Mon 16-11-15 14:51:20, Yaowei Bai wrote:
> This patch makes is_file_shm_hugepages return bool to improve
> readability due to this particular function only using either
> one or zero as its return value.
yes it makes sense here.
> No functional change.
>
> Signed-off-by: Yaowei Bai
Acked-by
On Mon 16-11-15 14:51:21, Yaowei Bai wrote:
> This patch makes is_file_hugepages return bool to improve
> readability due to this particular function only using either
> one or zero as its return value.
>
> This patch also removed the if condition to make is_file_hugepages
> return directly.
>
>
On Mon 16-11-15 14:51:22, Yaowei Bai wrote:
> This patch makes memblock_is_memory/reserved return bool to improve
> readability due to this particular function only using either
> one or zero as its return value.
>
> No functional change.
>
> Signed-off-by: Yaowei Bai
Acked-by: Michal Hocko
>
On Mon 16-11-15 14:51:24, Yaowei Bai wrote:
> Since commit a0b8cab3 ("mm: remove lru parameter from __pagevec_lru_add
> and remove parts of pagevec API") there's no user of this function anymore,
> so remove it.
>
> Signed-off-by: Yaowei Bai
Acked-by: Michal Hocko
> ---
> include/linux/mmzone
On Mon 16-11-15 14:51:26, Yaowei Bai wrote:
[...]
> @@ -72,16 +72,10 @@ struct zoneref *next_zones_zonelist(struct zoneref *z,
> }
>
> #ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
> -int memmap_valid_within(unsigned long pfn,
> +bool memmap_valid_within(unsigned long pfn,
>
Resend patch set in [1] with sereval improvements based on Arnaldo's
suggestions. This patch set is based on Arnaldo's perf/core.
Patch 1/13 - 2/13 should have already been collected by Arnaldo but
I can't find them in his repository, so I resend them.
Patch 3/13 - 6/13 are improved according to
From: Masami Hiramatsu
Fix memory leaking on failure path in debuginfo__find_trace_events()
which frees an array of probe_trace_events but doesn't clear all
allocated sub-structures and strings.
So, before doing zfree(tevs), clear all the array elements which
can have allocated resources.
Signed
This patch clones strtobool() from kernel's string.c to perf's string.c,
then add the function entry to tools/perf/util/include/linux/string.h.
string.h in perf utils doesn't have #ifdef guard. This patch fixes it.
This is preparation for enforcing BPF program configuration, which
would allow con
101 - 200 of 1077 matches
Mail list logo
