Update MPI2 strings to MPI2.5.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 3 +--
drivers/scsi/mpt3sas/mpt3sas_base.h | 1 -
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c
b/drivers/scsi/mpt3sas/mpt3sas_base.c
index
Bump mpt3sas driver version to v6.100.00.00.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt3sas/mpt3sas_base.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 7cdbc65..a89c752 100644
---
Add the following OEM's branding to the mpt3sas driver.
"VendorID" "DeviceID" "SubsystemVendor ID" "SubsystemDevice ID" Cisco
Branding String
0x1000 0x97 SVID = 0x1137 0x014C Cisco
9300-8E 12G SAS HBA
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/m
On Thu, Jun 11, 2015 at 6:00 PM, KOBAYASHI Yoshitake
wrote:
> This patch enables support for Toshiba BENAND.
> BENAND is a SLC NAND solution that automatically generates ECC inside
> NAND chip.
>
> Some of the comments in the following discussion may need to be considerd.
> https://lkml.org/lkml
Commit-ID: 3bf17472226b0041b0c61363bd57a5cadbe620c4
Gitweb: http://git.kernel.org/tip/3bf17472226b0041b0c61363bd57a5cadbe620c4
Author: Thomas Gleixner
AuthorDate: Tue, 9 Jun 2015 13:20:29 +0800
Committer: Thomas Gleixner
CommitDate: Fri, 12 Jun 2015 11:33:51 +0200
iommu: dmar: Extend s
Commit-ID: 959c870f7305be019d9316bc4e038dc6119d51ad
Gitweb: http://git.kernel.org/tip/959c870f7305be019d9316bc4e038dc6119d51ad
Author: Feng Wu
AuthorDate: Tue, 9 Jun 2015 13:20:36 +0800
Committer: Thomas Gleixner
CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Provide irq_remap
As of now we were starting the registration process and after the device
is registered we were checking if the device can be used by the
parport. Now lets check it first so that we do not need to go through
the registration process only to fail at the end.
The original exclusive access check at the
Commit-ID: 07c09787b26db724c94a912a572a9a4fa66008f3
Gitweb: http://git.kernel.org/tip/07c09787b26db724c94a912a572a9a4fa66008f3
Author: Feng Wu
AuthorDate: Tue, 9 Jun 2015 13:20:34 +0800
Committer: Thomas Gleixner
CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Add cap_pi_suppor
Commit-ID: bf56027ff4d9e75bf668ae990fe6204d00a23002
Gitweb: http://git.kernel.org/tip/bf56027ff4d9e75bf668ae990fe6204d00a23002
Author: Thomas Gleixner
AuthorDate: Tue, 9 Jun 2015 13:20:30 +0800
Committer: Thomas Gleixner
CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu: dmar: Provide
Commit-ID: c1d993341e46867af9412cf7f93f535895bbe3a7
Gitweb: http://git.kernel.org/tip/c1d993341e46867af9412cf7f93f535895bbe3a7
Author: Feng Wu
AuthorDate: Tue, 9 Jun 2015 13:20:37 +0800
Committer: Thomas Gleixner
CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Properly handle p
On Tue, May 26, 2015 at 01:08:20PM -0700, Jonathan Richardson wrote:
> The pwm_enable function didn't clear the enabled bit if a call to a
> clients enable function returned an error. The result was that the state
> of the pwm core was wrong. Clearing the bit when enable returns an error
> ensures
Commit-ID: 6f281923949a4944a7d5625e4f900ec02fefee59
Gitweb: http://git.kernel.org/tip/6f281923949a4944a7d5625e4f900ec02fefee59
Author: Feng Wu
AuthorDate: Tue, 9 Jun 2015 13:20:28 +0800
Committer: Thomas Gleixner
CommitDate: Fri, 12 Jun 2015 11:33:51 +0200
iommu: Add new member capabil
This Patch will provide more details of the devices such as slot number,
enclosure logical id, enclosure level & connector name in the following
scenarios,
- When end device is added in the topology,
- When the end device is removed from the setup,
- When the SCSI mid layer issues TASK ABORT/ DE
Commit-ID: 8541186faf3b59623c86022cc5f21ce9bd1332c5
Gitweb: http://git.kernel.org/tip/8541186faf3b59623c86022cc5f21ce9bd1332c5
Author: Feng Wu
AuthorDate: Tue, 9 Jun 2015 13:20:31 +0800
Committer: Thomas Gleixner
CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Implement irq_set
Commit-ID: 3d9b98f4ec17ba8d555f1972a3870035a87574a0
Gitweb: http://git.kernel.org/tip/3d9b98f4ec17ba8d555f1972a3870035a87574a0
Author: Feng Wu
AuthorDate: Tue, 9 Jun 2015 13:20:35 +0800
Committer: Thomas Gleixner
CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Setup Posted-Inte
Commit-ID: d75f152fc389cdd73a6c17f1247fce9052fd579c
Gitweb: http://git.kernel.org/tip/d75f152fc389cdd73a6c17f1247fce9052fd579c
Author: Feng Wu
AuthorDate: Tue, 9 Jun 2015 13:20:33 +0800
Committer: Thomas Gleixner
CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Avoid migrating V
Commit-ID: 2705a3d2a690c3dd9f58c7d788bc0f432acdeceb
Gitweb: http://git.kernel.org/tip/2705a3d2a690c3dd9f58c7d788bc0f432acdeceb
Author: Feng Wu
AuthorDate: Tue, 9 Jun 2015 13:20:32 +0800
Committer: Thomas Gleixner
CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Save the mode (po
/proc/kpagecgroup contains a 64-bit inode number of the memory cgroup
each page is charged to, indexed by PFN. Having this information is
useful for estimating a cgroup working set size.
The file is present if CONFIG_PROC_PAGE_MONITOR && CONFIG_MEMCG.
Signed-off-by: Vladimir Davydov
---
Documen
Knowing the portion of memory that is not used by a certain application
or memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is
This function returns the inode number of the closest online ancestor of
the memory cgroup a page is charged to. It is required for exporting
information about which page is charged to which cgroup to userspace,
which will be introduced by a following patch.
Signed-off-by: Vladimir Davydov
---
i
Removed the redundancy code while freeing the controller resources.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 57 +
1 file changed, 32 insertions(+), 25 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c
b/drivers/sc
As noted by Minchan, a benefit of reading idle flag from
/proc/kpageflags is that one can easily filter dirty and/or unevictable
pages while estimating the size of unused memory.
Note that idle flag read from /proc/kpageflags may be stale in case the
page was accessed via a PTE, because it would b
It is only used in mem_cgroup_try_charge, so fold it in and zap it.
Signed-off-by: Vladimir Davydov
---
include/linux/memcontrol.h | 6 --
mm/memcontrol.c| 48 --
2 files changed, 12 insertions(+), 42 deletions(-)
diff --git a/include
On Thu, Jun 11, 2015 at 9:49 PM, Andrew Morton
wrote:
> On Thu, 11 Jun 2015 14:10:45 +0300 Alexey Dobriyan
> wrote:
>
>> On Wed, Jun 10, 2015 at 11:58 PM, Andrew Morton
>> wrote:
>> > On Tue, 9 Jun 2015 18:39:02 -0700 Calvin Owens wrote:
>> >
>> >> On Tuesday 06/09 at 14:13 -0700, Andrew Morto
On Wed, Jun 10 2015, Vlastimil Babka wrote:
> Compaction should finish when the migration and free scanner meet, i.e. they
> reach the same pageblock. Currently however, the test in compact_finished()
> simply just compares the exact pfns, which may yield a false negative when the
> free scanner po
Hwpoison allows to filter pages by memory cgroup ino. Currently, it
calls try_get_mem_cgroup_from_page to obtain the cgroup from a page and
then its ino using cgroup_ino, but now we have an apter method for that,
page_cgroup_ino, so use it instead.
Signed-off-by: Vladimir Davydov
---
mm/hwpoison
Hi,
This patch set introduces a new user API for tracking user memory pages
that have not been used for a given period of time. The purpose of this
is to provide the userspace with the means of tracking a workload's
working set, i.e. the set of pages that are actively used by the
workload. Knowing
Driver initialization fails if driver tries to send IOC facts request message
when the IOC is in reset or in a fault state.
This patch will make sure that
1.Driver to send IOC facts request message only if HBA is in operational or
ready state.
2.If IOC is in fault state, a diagnostic reset wou
Quentin Lambert writes:
> The dev_attrs field of struct bus_type is going away, sue dev_groups instead.
s/sue/use/
Andreas.
--
Andreas Schwab, sch...@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
--
To uns
On 12/06/2015 11:59, Andreas Schwab wrote:
Quentin Lambert writes:
The dev_attrs field of struct bus_type is going away, sue dev_groups instead.
s/sue/use/
I meant use do you need to fix something else or should I resend with
the typo correction ?
Quentin
--
To unsubscribe from this list
On Wed, Jun 10, 2015 at 4:51 PM, Hn Chen wrote:
> Hi, Frans,
>
>> Alright, I was just wondering. Seems like a waste to be waiting for
>> something that's already finished ;-).
>> There's of course a risk that times may fluctuate between firmware versions.
>> Did you take that into account in the
On Wed, Jun 10, 2015 at 05:17:07PM +0900, Krzysztof Kozlowski wrote:
> Some drivers implement only pause operation (no resuming). Example is
> pl330 where pause is needed for getting residuum. pl330 does not support
> resume operation, transfer must be stopped after pause.
>
> However for slaves t
After the commit abc0b1447d4974963548777a5ba4a4457c82c426
("drm: Perform basic sanity checks on probed modes"), proper
clock-frequency becomes mandatory for validating the mode of panel.
The display does not work if there is no mode validated. Also, this
clock-frequency must be set appropriately fo
On Wed, Jun 10 2015, Vlastimil Babka wrote:
> Resetting the cached compaction scanner positions is now done implicitly in
> __reset_isolation_suitable() and compact_finished(). Encapsulate the
> functionality in a new function reset_cached_positions() and call it
> explicitly
> where needed.
>
> S
On Fri, Jun 12, 2015 at 2:21 AM, Konrad Zapalowicz
wrote:
>> diff --git a/drivers/staging/sm750fb/ddk750_chip.c
>> b/drivers/staging/sm750fb/ddk750_chip.c
>> index 8b47c1b..b2137c8 100644
>> --- a/drivers/staging/sm750fb/ddk750_chip.c
>> +++ b/drivers/staging/sm750fb/ddk750_chip.c
>> @@ -17,7 +17
At Fri, 12 Jun 2015 12:45:23 +0300,
Mihai Donțu wrote:
>
> On Fri, 12 Jun 2015 09:00:06 +0200 Takashi Iwai wrote:
> > At Fri, 12 Jun 2015 01:23:18 +0300, Mihai Donțu wrote:
> > > No, 4.0.5 and all previous kernels (>= 3.12) are OK. I have attached a
> > > small tarball with the two files produced
On 12/06/15 06:43, Javier Martinez Canillas wrote:
The Exynos interrupt combiner IP loses its state when the SoC enters
into a low power state during a Suspend-to-RAM. This means that if a
IRQ is used as a source, the interrupts for the devices are disabled
when the system is resumed from a sle
On Wed, Jun 10 2015, Vlastimil Babka wrote:
> The compaction migrate scanner tries to skip compound pages by their order, to
> reduce number of iterations for pages it cannot isolate. The check is only
> done
> if PageLRU() is true, which means it applies to THP pages, but not e.g.
> hugetlbfs pag
On Fri, 2015-06-12 at 10:55 +0200, Fredrik Markstrom wrote:
> The scaling mechanism might sometimes cause top to report >100%
> (sometimes > 1000%) cpu usage for a single thread. This patch makes
> sure that stime+utime corresponds to the actual runtime of the thread.
This Changelog is inadequate,
On Wed, Jun 10 2015, Vlastimil Babka wrote:
> The compaction free scanner is looking for PageBuddy() pages and skipping all
> others. For large compound pages such as THP or hugetlbfs, we can save a lot
> of iterations if we skip them at once using their compound_order(). This is
> generally unsaf
fixed all checkpatch.pl ERROR: do not use C99 // comments
Any C99 comments used to comment out code are simply removed.
Also some of the errors occur inside '#if 0' blocks which I
might as well fix since checkpatch.pl caught them but the blocks
themselves should probably be cleaned up later.
Chan
On Thu, May 21, 2015 at 09:29:24PM +0800, YH Huang wrote:
> Add display PWM driver support to modify backlight for MT8173.
>
> Signed-off-by: YH Huang
> ---
> drivers/pwm/Kconfig| 10 ++
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-mtk-disp.c | 228
>
Hasn't been a good cycle for md has it :-(
This pull request includes the fix for the hang I mentioned in my last
pull request, and another little bug.
4.2 should be much quieter
Thanks,
NeilBrown
The following changes since commit c65b99f046843d2455aa231747b5a07a999a9f3d:
Linux 4.1-rc6 (20
On Thu, May 21, 2015 at 09:29:23PM +0800, YH Huang wrote:
> Document the device-tree binding of MediatTek display PWM.
s/MediatTek/MediaTek/
>
> Signed-off-by: YH Huang
This could use a more verbose commit message. You could mention what the
PWM is typically used for (display I presume). Perha
On Thu, May 21, 2015 at 09:29:24PM +0800, YH Huang wrote:
> Add display PWM driver support to modify backlight for MT8173.
The driver also claims compatibility with MT6595, so you should mention
that here as well. Also please be more verbose in the commit message.
You should mention things like ho
On Fri, Jun 12, 2015 at 02:32:33PM +0800, Zidan Wang wrote:
> I have done some test today, and found that after mclk enable, we should delay
> at least 150ms to prepare the jack detect function. So no need to move mclk
> enable to startup.
No, this makes no sense - jack detection is not related t
On Thu, Jun 11, 2015 at 11:06:08AM +0200, Alexandre Belloni wrote:
> After discussing with the Kconfig maintainer, we found a better fiw
> allowing to keep each driver as modules.
Applied, but please use subject lines matching the style for the
subsystem.
signature.asc
Description: Digital signa
On Thu, Jun 11, 2015 at 03:14:34PM +0200, Sebastian Andrzej Siewior wrote:
> This was spotted by Fernando Lopez-Lezcano
> while he tried to compile a -RT kernel with this driver enabled.
> "make C=2" would also warn about this. This is is based on his patch.
Applied, thanks.
signature.asc
Descr
On 12/06/15 03:47, David Ahern wrote:
> On 6/11/15 8:15 AM, Peter Zijlstra wrote:
>>> This new PERF_RECORD_SWITCH event does not have those problems
>>> and it also has a couple of other small advantages. It is
>>> easier to use because it is an auxiliary event (like mmap,
>>> comm and task events)
On 12.06.2015 19:10, Sudeep Holla wrote:
>
>
> On 12/06/15 06:43, Javier Martinez Canillas wrote:
>> The Exynos interrupt combiner IP loses its state when the SoC enters
>> into a low power state during a Suspend-to-RAM. This means that if a
>> IRQ is used as a source, the interrupts for the devi
On Fri, 12 Jun 2015, Ma Jun wrote:
> This patch is applied to support the mbigen interrupt.
>
> As a kind of MSI interrupt controller, the mbigen is used as a child
> domain of ITS domain just like PCI devices.
> So the arm-gic-v3-its and related files are changed.
>
> The chip.c is also change
Hi Brian,
Today's linux-next merge of the l2-mtd tree got a conflict in MAINTAINERS
between commit 68c2d21d0126 "MIPS: BCM47xx: Move NVRAM driver to the
drivers/firmware/" from the mips tree and commit 02787daadbda "MAINTAINERS: add
entry for new brcmnand/ directory" from the l2-mtd tree.
I fixed
The function rtw_mfree_all_stainfo() is just holding the lock,
traversing the list, and then unlocking. It is not doing anything else.
So removed the function and modified the places from where it was called.
Signed-off-by: Sudip Mukherjee
---
drivers/staging/rtl8188eu/core/rtw_sta_mgt.c | 28 --
These variables were being set but not used afterwards.
Signed-off-by: Sudip Mukherjee
---
drivers/staging/rtl8188eu/core/rtw_mlme.c| 3 ---
drivers/staging/rtl8188eu/hal/phy.c | 10 ++
drivers/staging/rtl8188eu/hal/rtl8188e_dm.c | 2 --
drivers/staging/rtl818
The CONFIGs, the enum and the function declaration was not being
used anywhere.
Signed-off-by: Sudip Mukherjee
---
drivers/staging/rtl8188eu/include/odm.h | 8
drivers/staging/rtl8188eu/include/odm_HWConfig.h | 3 ---
2 files changed, 11 deletions(-)
diff --git a/drivers/stagi
Hi all,
After merging the tip tree, today's linux-next build (x86_allmodconfig)
failed like this:
drivers/net/ethernet/cavium/liquidio/request_manager.c: In function
'octeon_init_instr_queue':
drivers/net/ethernet/cavium/liquidio/request_manager.c:111:2: error: implicit
declaration of funct
On Thu, 2015-06-11 at 13:08 -0700, Duc Dang wrote:
> X-Gene v1 PCIe controller has a bug in Configuration Request Retry
> Status (CRS) logic:
> When CPU tries to read Vendor ID and Device ID of not-existed
> remote device, the controller returns 0x0001 instead of
> 0x; this will a
Dear Winner,
You have been awarded the sum of 8,000,000.00 (Eight Million Pounds sterling)
with reference number 77100146. This compensation funds from the United
Nation.Send us your personal details to deliver your funds.
Gloria Peter
--
To unsubscribe from this list: send the line "unsubscri
On 12/06/15 11:42, Krzysztof Kozlowski wrote:
On 12.06.2015 19:10, Sudeep Holla wrote:
On 12/06/15 06:43, Javier Martinez Canillas wrote:
The Exynos interrupt combiner IP loses its state when the SoC enters
into a low power state during a Suspend-to-RAM. This means that if a
IRQ is used as
On Fri, 2015-06-12 at 20:50 +1000, Michael Ellerman wrote:
> Hi Brian,
>
> Today's linux-next merge of the l2-mtd tree got a conflict in MAINTAINERS
> between commit 68c2d21d0126 "MIPS: BCM47xx: Move NVRAM driver to the
> drivers/firmware/" from the mips tree and commit 02787daadbda "MAINTAINERS:
On Fri, Jun 12, 2015 at 12:16:57PM +0200, Peter Zijlstra wrote:
> On Fri, 2015-06-12 at 10:55 +0200, Fredrik Markstrom wrote:
> > The scaling mechanism might sometimes cause top to report >100%
> > (sometimes > 1000%) cpu usage for a single thread. This patch makes
> > sure that stime+utime corresp
Oh, this one again. Like last time, close to be ready.
> +#include
> +#include
> +#include
> +#include
> +#include
Please sort the includes.
> +struct cgeb_i2c_priv {
> + struct cgeb_board_data *board;
> + struct i2c_adapter adapter;
> + int unit;
> +};
Only a si
Fix kernel-doc format validation to be able to use kernel-doc
script for checking it.
Signed-off-by: Michal Simek
---
drivers/firmware/memmap.c | 24 +---
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
in
On Fri, Jun 12, 2015 at 03:12:13PM +0530, Sreekanth Reddy wrote:
> In this patch, increased the number of MSIX vector support for SAS3 C0 HBAs
> to up-to 96.
>
> Following are changes that are done in this patch
> 1. Support this feature only for SAS3 C0 cards and also only when reply post
> fre
Hi Dudley,
On Fri, Jun 12, 2015 at 02:56:36PM +0800, Dudley Du wrote:
> Add proximity and interrupt control interfaces in sysfs device node.
> The proximity interface is used to disable/enable proximity function in
> device.
> The interrupt interface is used to disbale/enable interrupt from devic
On 11/06/15 17:15, Peter Zijlstra wrote:
> On Tue, Jun 09, 2015 at 05:21:10PM +0300, Adrian Hunter wrote:
>> Tracepoints are no good at all for non-privileged users
>> because they need either CAP_SYS_ADMIN or
>> /proc/sys/kernel/perf_event_paranoid <= -1.
>>
>> On the other hand, kernel software e
On Tue, 9 Jun 2015, Simon Wood wrote:
> Split quirk for PS Move Controller as it has to be treated differently
> when connected via BT.
I have applied the series.
Thanks,
--
Jiri Kosina
SUSE Labs
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a messag
Thanks Johannes, we will take care of this point in our current
on-development mpt2sas/mpt3sas merging activity.
Thanks,
Sreekanth
On Fri, Jun 12, 2015 at 4:39 PM, Johannes Thumshirn wrote:
> On Fri, Jun 12, 2015 at 03:12:13PM +0530, Sreekanth Reddy wrote:
>> In this patch, increased the number
On 06/11/2015 03:10 PM, Josh Poimboeuf wrote:
> C would definitely make more sense when analyzing object code. In fact,
> asmvalidate is written in C. But then I guess we'd have to re-implement
> the .cfi stuff and populate the DWARF sections manually instead of
> letting the assembler do it.
W
Am 12.06.2015 um 09:25 schrieb Linus Walleij:
On Thu, Jun 11, 2015 at 6:40 PM, Alexander Holler wrote:
Am 11.06.2015 um 14:30 schrieb Linus Walleij:
Certainly it is possible to create deadlocks in this scenario, but the
scope is not to create an ubreakable system.
IAnd what happens if you
Hi Philip,
On Thu, Jun 11, 2015 at 08:10:07PM +, Philip Moltmann wrote:
> Hi,
>
> sorry for taking so long to address your concerns.
>
> > What happens if you run this new driver on an older hypervisor that
> > does not support batched operations?
>
> When the driver starts or when it gets
On Wed, Jun 03, 2015 at 02:10:28PM -0700, Ben Zhang wrote:
> On Wed, Jun 3, 2015 at 4:59 AM, Mark Brown wrote:
> > On Tue, Jun 02, 2015 at 03:24:03PM -0700, Ben Zhang wrote:
> >> - int (*get)(unsigned int __user *bytes, unsigned int size);
> >> - int (*put)(const unsigned int __user *byte
Hi all,
Changes since 20150611:
The drm tree lost its build failures.
The arm-soc tree gained a build failure.
The l2-mtd tree gained a conflict against the mips tree.
The tip tree gained a build failure.
Non-merge commits (relative to Linus' tree): 10175
9016 files changed, 970989 insertion
Hi Raghu,
your commit f21fb3ed364b ("Add support of Cavium Liquidio ethernet
adapters") is in today's linux-next tree (i.e., next-20150612) adding
the following lines of code:
+config LIQUIDIO
[...]
+ select LIBCRC32
The select turns out to be a NOOP since there is no opt
Hello Sudeep,
Thanks a lot for the feedback.
On 06/12/2015 12:10 PM, Sudeep Holla wrote:
>
>
> On 12/06/15 06:43, Javier Martinez Canillas wrote:
>> The Exynos interrupt combiner IP loses its state when the SoC enters
>> into a low power state during a Suspend-to-RAM. This means that if a
>> IR
On Fri, Jun 12, 2015 at 03:12:16PM +0530, Sreekanth Reddy wrote:
> Removed the redundancy code while freeing the controller resources.
>
> Signed-off-by: Sreekanth Reddy
> ---
> drivers/scsi/mpt3sas/mpt3sas_base.c | 57
> +
> 1 file changed, 32 insertions(+),
Am 12.06.2015 um 13:19 schrieb Alexander Holler:
Am 12.06.2015 um 09:25 schrieb Linus Walleij:
On Thu, Jun 11, 2015 at 6:40 PM, Alexander Holler
wrote:
Am 11.06.2015 um 14:30 schrieb Linus Walleij:
Certainly it is possible to create deadlocks in this scenario, but the
scope is not to create
On Wed, Oct 01, 2014 at 03:08:30PM -0600, robert yang wrote:
> From: ryang
>
> Signed-off-by: ryang
> ---
> drivers/pwm/pwm-atmel.c | 10 --
> 1 file changed, 8 insertions(+), 2 deletions(-)
Seems like I never got around to review this. Sorry for that.
First, you need to change the co
Hi Noralf,
Am 09.06.2015 um 12:21 schrieb Noralf Trønnes:
This adds a new poweroff function to the watchdog driver for the
Raspberry Pi. Currently poweroff/halt results in a reboot.
[...]
+static void rpi_power_off(void)
+{
+ struct device_node *np =
+ of_find_compatible_no
On 12/06/15 12:27, Javier Martinez Canillas wrote:
Hello Sudeep,
Thanks a lot for the feedback.
On 06/12/2015 12:10 PM, Sudeep Holla wrote:
On 12/06/15 06:43, Javier Martinez Canillas wrote:
The Exynos interrupt combiner IP loses its state when the SoC enters
into a low power state during
On Wed, Jun 03, 2015 at 08:43:20PM +0900, Greg Kroah-Hartman wrote:
> 3.14-stable review patch. If anyone has any objections, please let me know.
>
> --
>
> From: Jean Delvare
>
> Commit 178c2490b99f898efc06d1ad75cadc84f13021a6 ("thermal: step_wise:
> cdev only needs update on
On Thu, Jun 11, 2015 at 04:55:47PM +0200, Petr Mladek wrote:
> The output from "echo l >/proc/sysrq-trigger" looks reasonable.
> It does not mix output from different CPUs. This is expected
> because of the @lock.
>
> The other observation is that it prints CPUs in _random_ order:
> 28, 24, 25, 1,
On Thu, Jun 11, 2015 at 05:37:02PM -0700, Stephen Boyd wrote:
> Add an SPMI regulator driver for Qualcomm's PM8841, PM8941, and
> PM8916 PMICs. This driver is based largely on code from
> codeaurora.org[1].
This doesn't apply against current code, please check and resend.
signature.asc
Descripti
On 06/11/2015 09:34 PM, Andrew Morton wrote:
On Thu, 11 Jun 2015 15:21:30 -0400 Eric B Munson wrote:
Ditto mlockall(MCL_ONFAULT) followed by munlock(). I'm not sure
that even makes sense but the behaviour should be understood and
tested.
I have extended the kselftest for lock-on-fault to tr
On Thu, Jun 11, 2015 at 05:37:03PM -0700, Stephen Boyd wrote:
> Some regulators have a fixed load that isn't captured by
> consumers that the kernel knows about. Add a constraint to
> support this.
Applied, thanks.
signature.asc
Description: Digital signature
On Mon, Jun 08, 2015 at 09:33:50AM +0100, James Hogan wrote:
> Hi stable folk,
>
> On 08/05/15 15:16, James Hogan wrote:
> > On 07/05/15 13:47, Nicholas Mc Guire wrote:
> >> Fix possible unintended sign extension in unsigned MMIO loads by casting
> >> to uint16_t in the case of mmio_needed != 2.
>
On Fri, Jun 12, 2015 at 02:12:11PM +0300, Adrian Hunter wrote:
> On 11/06/15 17:15, Peter Zijlstra wrote:
> > Right, so the one wee problem I have is that this only provides sched_in
> > data, I imagine people might be interested in sched_out as well.
>
> That is not a problem although it would b
On Thu, Jun 11, 2015 at 05:37:04PM -0700, Stephen Boyd wrote:
> Some regulators need to be configured to pull down a resistor
> when the regulator is disabled. Add an op (set_pull_down) and a
> DT property + constraint to support this.
Applied, thanks.
signature.asc
Description: Digital signatur
On Mon, Jun 08, 2015 at 10:14:49PM -0700, Vinson Lee wrote:
> On Tue, May 26, 2015 at 7:53 PM, Xiao Guangrong
> wrote:
> >
> >
> > On 05/26/2015 10:48 PM, Paolo Bonzini wrote:
> >>
> >>
> >>
> >> On 26/05/2015 16:45, Edward Cree wrote:
> >
> > This breaks older compilers that can't initial
- arch_spin_lock/unlock were lacking the ACQUIRE/RELEASE barriers
Since ARCv2 only provides load/load, store/store and all/all, we need
the full barrier
- LLOCK/SCOND based atomics, bitops, cmpxchg, which return modified
values were lacking the explicit smp barriers.
- Non LLOCK/SCOND
On Thu, Jun 11, 2015 at 05:37:05PM -0700, Stephen Boyd wrote:
> Some regulators support a "soft start" feature where the voltage
> ramps up slowly when the regulator is enabled. Add an op
> (set_soft_start) and a DT property + constraint to support this.
Applied, thanks.
signature.asc
Descriptio
On 06/12/2015 04:26 AM, Stefan Wahren wrote:
Hi Noralf,
Am 09.06.2015 um 12:21 schrieb Noralf Trønnes:
This adds a new poweroff function to the watchdog driver for the
Raspberry Pi. Currently poweroff/halt results in a reboot.
[...]
+static void rpi_power_off(void)
+{
+struct device_node
On Fri, Jun 12, 2015 at 4:58 PM, Johannes Thumshirn wrote:
> On Fri, Jun 12, 2015 at 03:12:16PM +0530, Sreekanth Reddy wrote:
>> Removed the redundancy code while freeing the controller resources.
>>
>> Signed-off-by: Sreekanth Reddy
>> ---
>> drivers/scsi/mpt3sas/mpt3sas_base.c | 57
>> +++
On Thu, Jun 11, 2015 at 05:37:06PM -0700, Stephen Boyd wrote:
> Some regulators can limit their input current (typically annotated
> as ilim). Add an op (set_input_current_limit) and a DT property +
> constraint to support this.
Applied, thanks.
signature.asc
Description: Digital signature
No semantical changes !
Cc: Peter Zijlstra (Intel)
Signed-off-by: Vineet Gupta
---
arch/arc/include/asm/bitops.h | 477 +-
1 file changed, 144 insertions(+), 333 deletions(-)
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
inde
The result of container_of macro cannot be NULL, so there is no need to
check whether info is NULL.
Signed-off-by: Anda-Maria Nicolae
---
drivers/power/rt9455_charger.c |3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/power/rt9455_charger.c b/drivers/power/rt9455_charger.c
index
On 06/09/2015 03:21 AM, Noralf Trønnes wrote:
This adds a new poweroff function to the watchdog driver for the
Raspberry Pi. Currently poweroff/halt results in a reboot.
The Raspberry Pi firmware uses the RSTS register to know which
partiton to boot from. The partiton value is spread into bits
0
On Thu, Jun 11, 2015 at 07:14:35PM +0800, Zidan Wang wrote:
> add kcontrol to select ADC data output.
>
> Signed-off-by: Zidan Wang
> ---
> sound/soc/codecs/wm8960.c | 9 +
> 1 file changed, 9 insertions(+)
>
> diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
> index c
Hi Eddie,
On Fri, Jun 12, 2015 at 5:27 PM, Eddie Huang wrote:
>
> Add MT8173 I2C device nodes, include I2C controllers and pins.
> MT8173 has six I2C controllers, from i2c0 to i2c6, exclude i2c5.
> The 6th I2C controller register base doesn't next to 5th I2C,
> and there is a hardware between 5th
On 12/06/2015 at 17:17:39 +0800, pang.xun...@zte.com.cn wrote :
> Hi Alexandre,
>
> Alexandre Belloni wrote 2015-06-12
> PM 04:40:27:
> >
> > Re: [PATCH v3 1/4] drivers/rtc/pcf8563: Replace deprecated
> > rtc_time_to_tm() and rtc_tm_to_time()
> >
> > Hi Xunlei,
> >
> > Just to let you know t
201 - 300 of 759 matches
Mail list logo
