This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
use this I2C IP of Synopsys Designware for HiKey board.
Signed-off-by: Xinwei Kong
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++
1 file changed, 37 insertions(+)
diff --git a/arch/arm64/boot/
* Jiri Olsa wrote:
> I can't make that failure on 88 cpus server, I assume you can
> reproduce this fairly easily?
Yeah, when it triggers it reproduces fairly easily - but it seems to be
dependent
on build timings. I don't use a large server for this test, just a single
socket
system with 6
>> I interpreted the eventual passing of a null pointer to the rbd_dev_destroy()
>> function as an indication for further source code adjustments.
>
> If all error paths could be adjusted so that NULL pointers are never passed
> in,
> destroy functions wouldn't need to have a NULL check, would th
From: Liu Ying
Signed-off-by: Liu Ying
Acked-by: Thierry Reding
Signed-off-by: Chris Zhong
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
include/drm/drm_mipi_dsi.h | 14 ++
1 file changed, 14 insertions(+)
diff --git a/include/drm/drm_mipi_
Add support for Synopsys DesignWare MIPI DSI host controller which is
embedded in the rk3288 SoCs.
Signed-off-by: Chris Zhong
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/rockchip/Kconfig| 10 +
drivers/gpu/drm/rockchip/Ma
Since the mipi dsi driver need to use the clock of vop to make the
calculation of Blanking. But sometimes the clock driver can not set a
accurate clock_rate for vop, get it by clk_round_rate before mode_set,
so we can get the true value.
Signed-off-by: Chris Zhong
Acked-by: Mark Yao
---
Change
From: Liu Ying
This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
host controller DRM bridge driver.
Signed-off-by: Liu Ying
Signed-off-by: Chris Zhong
Acked-by: Rob Herring
---
Changes in v5: None
Changes in v4:
- remove the cfg clk
- remove gpr property from example, si
Add a mipi_dsi node, and also add mipi_dsi endpoints to vopb and vopl
output port nodes.
Signed-off-by: Chris Zhong
---
Changes in v5:
- modify the clk name to SCLK_MIPIDSI_24M
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3288.dtsi | 39
* Kees Cook wrote:
> It may be useful to debug writes to the readonly sections of memory,
> so provide a cmdline "rodata=off" to allow for this.
>
> Suggested-by: H. Peter Anvin
> Signed-off-by: Kees Cook
> ---
> Documentation/kernel-parameters.txt | 4
> init/main.c
add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver
Signed-off-by: Chris Zhong
Acked-by: Rob Herring
---
Changes in v5: None
Changes in v4: None
Changes in v3:
- move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
Changes in v2: None
.../display/rockchip/dw_mipi
sclk_mipidsi_24m is the gating of mipi dsi phy.
Signed-off-by: Chris Zhong
Acked-by: Stephen Boyd
---
Changes in v5:
- modify the mipidsi clk name to SCLK_MIPIDSI_24M
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/clk/rockchip/clk-rk3288.c | 2 +-
1 file changed, 1 inse
Adds a new id for the sclk supplying the mipidsi on rk3288 socs.
Signed-off-by: Chris Zhong
---
Changes in v5:
- change the mipidsi clk to SCLK_MIPIDSI_24M
Changes in v4: None
Changes in v3: None
Changes in v2:
- add the mipi clk id in a single patch
include/dt-bindings/clock/rk3288-cru.h |
Check the validity of post_disable/pre_enable in bridge->funcs before
call them.
Signed-off-by: Chris Zhong
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/drm_bridge.c | 6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a
This tv080wum-nl0 panel is a mipi panel, it can use in MIPI_TX socket
of rk3288 evb board.
Signed-off-by: Chris Zhong
---
Changes in v5:
- add a blank line befor lcd_en
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3288-evb.dtsi | 20 +++-
1
add Synopsys DesignWare MIPI DSI host controller driver support.
Signed-off-by: Chris Zhong
Signed-off-by: Liu Ying
---
Changes in v5:
Adviced by Thierry
- use hyphens instead of underscore
- use encoder in drm_bridge
- reformatting the dptdin table
- use readx_poll_timeout to check register
-
The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM bridge driver and a rockchip MIPI DSI specific DRM
driver.
This series also includes a DRM panel driver for BOE TV080WUM-NL0 panel.
This panel o
On Thu, Nov 26, 2015 at 08:35:12AM +0100, Johan Hovold wrote:
> On Wed, Nov 25, 2015 at 10:26:12PM +0200, Andy Shevchenko wrote:
> > On Wed, Nov 25, 2015 at 12:28 AM, Konstantin Shkolnyy
> > wrote:
> > > Added tx_empty callback needed for generic wait-until-sent support.
> > > Without this functio
When a cloned request is retried on other queues it always needs
to be checked against the queue limits of that queue.
Otherwise the calculations for nr_phys_segments might be wrong,
leading to a crash in scsi_init_sgtable().
To clarify this the patch renames blk_rq_check_limits()
to blk_cloned_rq
On 11/22/2015 9:19 AM, Yuval Mintz wrote:
+void hns_rcbv2_int_ctrl_hw(struct hnae_queue *q, u32 flag, u32 mask)
+{
+ u32 int_mask_en = !!mask;
+
+ if (flag & RCB_INT_FLAG_TX)
+ dsaf_write_dev(q, RCB_RING_INTMSK_TXWL_REG,
int_mask_en);
+
+ if (flag & RCB_INT_FLAG_R
On Wed, 25 Nov 2015 16:16:27 +0100
Thierry Reding wrote:
> On Wed, Nov 25, 2015 at 04:30:19PM +0800, Jisheng Zhang wrote:
> > On Tue, 24 Nov 2015 17:23:06 +0100 Thierry Reding wrote:
> > > On Tue, Nov 24, 2015 at 01:43:05PM +0800, Jisheng Zhang wrote:
> > > > This patch adds S2R support for be
* Namhyung Kim wrote:
> Unwinding optimized binaries using frame pointer gives garbage. Check
> callchain address and stop if it's under vm.mmap_min_addr sysctl value.
>
> Before:
> $ perf report --stdio --no-children -g callee
> ...
>
>1.37% perf[kernel.vmlinux][k] smp_call_
[sorry, ended up screwing up Message-Id in In-Reply-To! resending]
--
Minchan Kim wrote:
[..]
> > Aha, I see. I don't mind to send it to -stable (with __GFP_HIGHMEM fix
> > up).
Hello Minchan,
Sorry for not replying sooner.
> Sur
On Wed, Nov 25, 2015 at 05:32:45PM +0100, Ekaterina Tumanova wrote:
> Refactor vmlinux_path_init function to ease subsequent additions of
> new vmlinux locations.
>
> Signed-off-by: Ekaterina Tumanova
> Acked-by: Alexander Yarygin
Acked-by: Jiri Olsa
thanks,
jirka
--
To unsubscribe from this
On Wed, Nov 25, 2015 at 10:26:12PM +0200, Andy Shevchenko wrote:
> On Wed, Nov 25, 2015 at 12:28 AM, Konstantin Shkolnyy
> wrote:
> > Added tx_empty callback needed for generic wait-until-sent support.
> > Without this function, when the port is closed usbserial can't know that
> > there are still
On Wed, Nov 25, 2015 at 05:32:46PM +0100, Ekaterina Tumanova wrote:
> Currently when debuginfo is separated to vmlinux.debug, it's contents
> get ignored. Let's change that and add it to the vmlinux_path list.
>
> Signed-off-by: Ekaterina Tumanova
> Acked-by: Alexander Yarygin
Acked-by: Jiri Ol
On Wed, 2015-11-25 at 14:55 +0100, Tomas Henzl wrote:
> On 25.11.2015 12:41, Ching Huang wrote:
> > From: Ching Huang
> >
> > Releasing allocated resource if get configuration data failed.
> >
> > Signed-of-by: Ching Huang
> >
> > ---
> >
> > diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c
> > b/d
On 11/22/2015 9:30 AM, Yuval Mintz wrote:
static void hns_ppe_init_hw(struct hns_ppe_cb *ppe_cb) {
...
+ /* Set default RSS key and indrection table*/
+ const u32 rss_key[HNS_PPEV2_RSS_KEY_NUM] = {
+ 0x6d5a56da, 0x255b0ec2,
+ 0x4167253d, 0x43a38fb0,
+
Current code doesn't update port value of Port Multiplier(PM) when
sending FIS of softreset to device, command will fail if FBS is
enabled.
There are two ways to fix the issue: the first is to disable FBS
before sending softreset command to PM device and the second is
to update port value of PM wh
Minchan Kim wrote:
[..]
> > Aha, I see. I don't mind to send it to -stable (with __GFP_HIGHMEM fix
> > up).
Hello Minchan,
Sorry for not replying sooner.
> Sure.
> Can I add your acked-by for [2/3] and [3/3]?
>
> And I will keep order and add stable mark in [2/3].
yes.
a) + __GFP_HIGHMEM in
This patchset adds support of Hisilicon Hip06 SoC to the existing HNS
ethernet driver.
The changes in the driver are mainly due to changes in the DMA
descriptor provided by the Hip06 ethernet hardware. These changes
need to co-exist with already present Hip05 DMA descriptor and its
operating funct
This patch adds the support of "TSO (TCP Segment Offload)" feature
provided by the Hip06 ethernet hardware to the HNS ethernet
driver.
Enabling this feature would help offload the TCP Segmentation
process to the Hip06 ethernet hardware. This eventually would help
in saving precious cpu cycles.
Si
On Wed, Nov 25, 2015 at 11:46:45PM +, Kuninori Morimoto wrote:
>
> Hi LABBE
>
> Thank you for your patch
>
> > of_match_device could return NULL, and so cause a NULL pointer
> > dereference later.
> > Even if the probability of this case is very low, fixing it made
> > static analyzers happy
This patch adds the support of "RSS (Receive Side Scaling)" feature
provided by the Hip06 ethernet hardware to the HNS ethernet
driver.
This feature helps in distributing the different flows (mapped as
hash by hardware using Toeplitz Hash) to different Queues asssociated
with the processor cores.
This patch adds the initializzation code to disable the hardware
vlan support for VLAN Tag stripping by default for now.
Proper support of "hardware VLAN assitance" feature would
soon come in the next coming patches.
Signed-off-by: Salil Mehta
---
PATCH V5:
- Minor merge/reject change resolved t
From: Salil
This patch adds the support of ethtool TSO option to support
Hip06 SoC to HNS
Signed-off-by: Salil Mehta
Signed-off-by: lisheng
---
PATCH V5:
- No change over the previous patch
PATCH V4:
This fixes the comments given by Sergei Shtylyov over the PATCH V3:
Link: https://lkml.org/l
This PATCH V5 address the review comments by Yuval Mintz
. This rework of comments are basically
related to:
1) styling of the code,
2) RSS default Key initiailization related code
3) redundant code removal
PATCH V4:
This addresses the review comment provided by
Sergei Shtylyov. The changel
Hi Allen,
Yes, I will.
In fact, I have already send the patch.
This patch will add the new compatible entries in qspi driver for the ls1021a
platform.
Thanks for your review.
Best Regards,
Yuan Yao
-Original Message-
From: Han Xu [mailto:han...@freescale.com]
Sent: Wednesday, Novembe
On 11/26/2015 10:57 AM, Konrad Rzeszutek Wilk wrote:
> On Thu, Nov 26, 2015 at 10:28:10AM +0800, Bob Liu wrote:
>>
>> On 11/26/2015 06:12 AM, Konrad Rzeszutek Wilk wrote:
>>> On Wed, Nov 25, 2015 at 03:56:03PM -0500, Konrad Rzeszutek Wilk wrote:
On Wed, Nov 25, 2015 at 02:25:07PM -0500, Konra
Am 25.11.2015 um 17:39 schrieb Greg Kroah-Hartman:
> On Thu, Nov 05, 2015 at 01:20:33PM +0100, SF Markus Elfring wrote:
>> From: Markus Elfring
>> Date: Thu, 5 Nov 2015 12:48:58 +0100
>>
>> The functions "kfree" and "kobject_put" were called in a few cases by the
>> function "class_register_type"
Unwinding optimized binaries using frame pointer gives garbage. Check
callchain address and stop if it's under vm.mmap_min_addr sysctl value.
Before:
$ perf report --stdio --no-children -g callee
...
1.37% perf[kernel.vmlinux][k] smp_call_function_single
|
On Tue, 2015-11-24 at 16:39 -0800, Andrew Morton wrote:
> On Wed, 18 Nov 2015 15:20:04 -0800 Daniel Cashman
> wrote:
> > Address Space Layout Randomization (ASLR) provides a barrier to
> > exploitation of user-space processes in the presence of security
> > vulnerabilities by making it more diffi
The callchain rbtree is rebuilt periodically, so it needs to
reinitialize the root everytime. Otherwise it can be stuck in the
rbtree insertion with stale pointers.
Signed-off-by: Namhyung Kim
---
tools/perf/util/callchain.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/perf/util/ca
If user requested to hide unresolved entries, skip unresolved callchains
as well as hist entries.
Signed-off-by: Namhyung Kim
---
tools/perf/builtin-report.c | 7 +++
tools/perf/util/machine.c | 5 +
tools/perf/util/symbol.h| 3 ++-
3 files changed, 10 insertions(+), 5 deletions(-)
On Tue, 2015-11-24 at 17:09 +0530, Vineet Gupta wrote:
> Hi Michael,
> On Tuesday 24 November 2015 04:31 PM, Michael Ellerman wrote:
> > On Tue, 2015-11-24 at 09:46 +, Vineet Gupta wrote:
> > > > On Tuesday 24 November 2015 01:20 PM, h...@lst.de wrote:
> > > > > > Hi Vineet,
> > > > > >
> > >
Hi Thierry
Thanks for your feedback.
On 11/21/2015 12:07 AM, Thierry Reding wrote:
On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
add Synopsys DesignWare MIPI DSI host controller driver support.
Signed-off-by: Chris Zhong
---
Changes in v4:
eliminate some warnning
Changes in
LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697 use common dt-bindings
for describing backlight device.
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
Cc: Lee Jones
Cc: Jacek Anaszewski
Cc: Mark Brown
Cc: linux-l...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim
Ok.
Thanks.
-Original Message-
From: Han Xu [mailto:han...@freescale.com]
Sent: Wednesday, November 25, 2015 2:15 PM
To: Yuan Yao-B46683
Cc: dw...@infradead.org; computersforpe...@gmail.com;
linux-kernel@vger.kernel.org; linux-...@lists.infradead.org
Subject: Re: [PATCH] mtd: spi-nor: f
This patch describes overall binding for TI LMU MFD devices.
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
Cc: Lee Jones
Cc: Jacek Anaszewski
Cc: Mark Brown
Cc: linux-l...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim
---
Documentation/devicetree/bindings/mfd/ti
This is consolidated driver which supports backlight devices below.
LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.
Structure
-
It consists of two parts - core and data.
Core part supports features below.
- Backlight subsystem control
- Channel configuration from DT prope
This binding describes LM3631 and LM3632 regulator properties.
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
Cc: Lee Jones
Cc: Jacek Anaszewski
Cc: Mark Brown
Cc: linux-l...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim
---
.../bindings/regulator/lm363x-regulato
TI LMU (Lighting Management Unit) driver supports lighting devices below.
LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.
LMU devices have common features.
- I2C interface for accessing device registers
- Hardware enable pin control
- Backlight brightness control
- Notifier for hardw
LM363X regulator driver supports LM3631 and LM3632.
LM3631 has 5 regulators. LM3632 provides 3 regulators.
One boost output and LDOs are used for the display module.
Boost voltage is configurable but always on.
Supported operations for LDOs are enabled/disabled and voltage change.
Two LDOs of LM36
LM3633 LED driver supports generic LED functions and pattern generation.
Pattern is generated through the sysfs. ABI documentation is also added.
Device creation from device tree
LED channel name, LED string usage and max current settings are
configured inside
LM3633 LED device is one of TI LMU device list.
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
Cc: Lee Jones
Cc: Jacek Anaszewski
Cc: Mark Brown
Cc: linux-l...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim
---
.../devicetree/bindings/leds/leds-lm3633.txt |
LM3633 and LM3697 are TI LMU MFD device.
Those devices have hardware monitoring feature which detects open or
short circuit case.
Debugfs
---
Two files are created.
open_fault: check light output channel is open or not.
short_fault: check light output channel is shorted or not.
T
TI Lighting Management Unit drivers support lighting devices below.
Enable pin Backlight HW fault monitoring LEDs Regulators
-- - ---
LM3532 o o xx x
LM3631 o
On Tue, 2015-11-24 at 21:23 +0300, Denis Kirjanov wrote:
> ./drmgr -c cpu -a -r gives the following warning:
>
> [ 2327.035563] RCU used illegally from offline CPU!
> rcu_scheduler_active = 1, debug_locks = 1
> [ 2327.035564] no locks held by swapper/12/0.
> [ 2327.035565] stack backtrace:
> [ 23
On 25/11/15 20:24, Konrad Rzeszutek Wilk wrote:
> We could return EINVAL but EBUSY (or EALREADY?)is more appropiate.
>
> CC: jgr...@suse.com
> Signed-off-by: Konrad Rzeszutek Wilk
While it doesn't really matter it's cleaner.
Reviewed-by: Juergen Gross
> ---
> drivers/xen/xen-scsiback.c | 2 +
On Wed, Nov 25, 2015 at 07:10:30PM +0600, Alexander Kuleshov wrote:
> The dgap driver contains three functions: dgap_cmdb(), dgap_cmdw()
> and dgap_cmdw_exit which are contain duplicated code which waits
> if necessary before updating the pointer to limit outstanding
> commands. This patch introduc
> -Original Message-
> From: Radim Krčmář [mailto:rkrc...@redhat.com]
> Sent: Wednesday, November 25, 2015 11:43 PM
> To: Paolo Bonzini
> Cc: Wu, Feng ; k...@vger.kernel.org; linux-
> ker...@vger.kernel.org
> Subject: Re: [PATCH] KVM: x86: Add lowest-priority support for vt-d posted-
> i
Salve
tv, orologio, bici, gultar, iphone, prodotti Samsung, tv, dj
la spedizione è gratuita
si te: poazzlo .com
On Wed, 2015-11-25 at 18:15 -0800, Shawn N wrote:
> Hello,
>
> The checkpatch.pl GIT_COMMIT_ID rule appears to be designed to enforce
> a minimum description when citing patches: 'commit <12+ chars of sha1>
> (\"\")'. One (unintended?) consequence of this rule is
> that unmodified 'cherry picked f
Some gdscs might be controlled via voting registers and might not
really disable when the kernel intends to disable them (due to other
votes keeping them enabled)
Mark these gdscs with a flag for we do not check/wait on a disable
status for these gdscs within the kernel disable callback.
Signed-of
Add all data for the GDSCs which are part of msm8996 GCC block
Signed-off-by: Rajendra Nayak
---
arch/arm64/boot/dts/qcom/msm8996.dtsi| 1 +
drivers/clk/qcom/gcc-msm8996.c | 88
include/dt-bindings/clock/qcom,gcc-msm8996.h | 11
3 files ch
Some qcom SoCs' can have hierarchical power domains. Let the gdsc structs
specify the parents (if any) and the driver add genpd subdomains for them.
Signed-off-by: Rajendra Nayak
---
drivers/clk/qcom/common.c | 14 +-
drivers/clk/qcom/gdsc.c | 27 +--
driver
Some gdsc power domains can have a gds_hw_controller block inside
to help ensure all slave devices within the power domain are idle
before the gdsc is actually switched off.
This is mainly useful in power domains which host a MMU, in which
case its necessary to make sure there are no outstanding MM
On Wed, Nov 25, 2015 at 11:37:29AM -0500, David Miller wrote:
>
> > Would be easier to refer to the comment that now adorns
> > waitqueue_active().
>
> Yeah, that might be a good idea. Herbert can you adjust this?
Sure, here is an updated patch. Note that this patch is based
on net-next where t
With gdsc driver capable of handling hierarchical power domains,
specify oxili_gdsc as parent of oxilicx_gdsc.
Remove all direct calls to genpd from the mmcc clock driver. The
adding and removing of subdomains is now handled from within
the gdsc driver.
Signed-off-by: Rajendra Nayak
---
drivers
Add all gdsc data which are part of mmcc on msm8996 family
Signed-off-by: Rajendra Nayak
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
drivers/clk/qcom/mmcc-msm8996.c | 154 ++
include/dt-bindings/clock/qcom,mmcc-msm8996.h | 17 +++
3 files cha
This series adds support for GDSCs' which are part of gcc and mmcc
in QCOM msm8996 SoC. Series applies on top of the patches[1] which
adds support for MSM8996 clocks.
There are many more cases of gdscs within gdscs (hierarchical power
domains) in msm8996 (msm8974 has one such instance which is sup
Add new dtsi and dts files for the apq8096 dragonboards with just
a serial device used as debug console
Signed-off-by: Rajendra Nayak
---
Patch applies on top of Stephens' patches to add msm8996 dtsi
https://lkml.org/lkml/2015/11/17/955
arch/arm64/boot/dts/qcom/Makefile | 2 +-
Hi Rob,
On 11/22/2015 2:31 PM, Rob Herring wrote:
> On Fri, Nov 20, 2015 at 05:17:15PM -0700, Joshua Henderson wrote:
>> From: Purna Chandra Mandal
>>
>> Document the devicetree bindings for the clock driver found on Microchip
>> PIC32 class devices.
>>
>> Signed-off-by: Purna Chandra Mandal
>>
On Thu, 26 Nov 2015, Måns Rullgård wrote:
> Russell King - ARM Linux writes:
>
> > On Thu, Nov 26, 2015 at 12:50:08AM +, Måns Rullgård wrote:
> >> If not calling the function saves an I-cache miss, the benefit can be
> >> substantial. No, I have no proof of this being a problem, but it's
>
On Wed, 2015-11-25 at 21:12 +0800, Geliang Tang wrote:
> WARN() takes a condition and a format string. The condition was
> omitted. So I added it.
>
> Signed-off-by: Geliang Tang
> ---
> arch/powerpc/kernel/setup_64.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch
Hi all,
Reminder: there will be no linux-next release next week (Nov 30 - Dec 4).
Changes since 20151124:
The net-next tree gained a conflict against the net tree.
The drm-panel tree lost its build failure.
Non-merge commits (relative to Linus' tree): 2829
3498 files changed, 107354 insertion
Hi Rob,
On 11/22/2015 2:57 PM, Rob Herring wrote:
> On Fri, Nov 20, 2015 at 05:17:24PM -0700, Joshua Henderson wrote:
>> From: Andrei Pistirica
>>
>> Document the devicetree bindings for the SDHC peripheral found on
>> Microchip PIC32 class devices.
>>
>> Signed-off-by: Andrei Pistirica
>> Signe
Hi Marc,
On 11/25/2015 5:52 PM, Ray Jui wrote:
Hi Marc,
[...]
+/* reserve memory for MSI posted writes */
+msi->msi_cpu = dma_alloc_coherent(pcie->dev,
+ msi->nr_msi_region * MSI_MEM_REGION_SIZE,
+ &msi->msi_dma, GFP_KERNEL);
Same here. Also
On Thu, Nov 26, 2015 at 7:26 AM, Joonsoo Kim wrote:
> On Wed, Nov 25, 2015 at 01:00:22PM +0100, Michal Hocko wrote:
>> On Tue 24-11-15 15:22:03, Joonsoo Kim wrote:
>> > When I tested compaction in low memory condition, I found that
>> > my benchmark is stuck in congestion_wait() at shrink_inactive
> Subject: Re: [PATCH v9] PCI: Xilinx-NWL-PCIe: Added support for Xilinx NWL
> PCIe Host Controller
>
> On Wed, 25 Nov 2015 05:40:49 +
> Bharat Kumar Gogada wrote:
>
> > > On Thu, 19 Nov 2015 11:05:23 +0530
> > > Bharat Kumar Gogada wrote:
> > >
> > > > Adding PCIe Root Port driver for Xili
Hi Rob,
On 11/22/2015 2:14 PM, Rob Herring wrote:
> On Fri, Nov 20, 2015 at 05:17:13PM -0700, Joshua Henderson wrote:
>> From: Cristian Birsan
>>
>> Document the devicetree bindings for the interrupt controller on Microchip
>> PIC32 class devices. This also adds a header defining associated inter
Hi Sergei,
On 11/21/2015 8:19 AM, Sergei Shtylyov wrote:
> Hello.
>
> On 11/21/2015 3:17 AM, Joshua Henderson wrote:
>
>> From: Andrei Pistirica
>>
>> Document the devicetree bindings for the SDHC peripheral found on
>> Microchip PIC32 class devices.
>>
>> Signed-off-by: Andrei Pistirica
>> Si
On 11/25/2015 1:03 PM, Tony Lindgren wrote:
> * Arnd Bergmann [151125 11:50]:
>> On Wednesday 25 November 2015 10:16:44 Tony Lindgren wrote:
>>> * Pali Rohár [151123 06:46]:
On Sunday 22 November 2015 07:51:46 Pavel Machek wrote:
> On Wed 2015-11-11 17:10:46, Frank Rowand wrote:
>> A
From: Francois Romieu
Date: Wed, 25 Nov 2015 23:47:08 +0100
> Jarod Wilson :
> [...]
>> They do at least have a signed-off-by in the patches attached to the bug,
>> so I'm working on touching up the descriptions and formatting, regression
>> testing them on my laptop that has an alx-driven E2200
Hi Arnd,
On 11/21/2015 1:49 PM, Arnd Bergmann wrote:
> On Friday 20 November 2015 17:17:15 Joshua Henderson wrote:
>> +/* PIC32 specific clks */
>> +pic32_clktree {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + reg = <0x1f801200 0x200>;
>> + compatible = "microchi
Something unexpected may happen if copy statically linked perf to a
production environment:
# ./perf probe -m ./mymodule.ko my_func
[mymodule] with build id 326ab42550ef3d24944f53c817533728367effeb not found,
continuing without symbols
Failed to find symbol my_func in /home/wangnan/kmodule/mym
On Wed, Nov 25, 2015 at 7:15 PM, Dong, Eddie wrote:
>> On Wed, Nov 25, 2015 at 12:21 AM, Lan Tianyu wrote:
>> > On 2015年11月25日 13:30, Alexander Duyck wrote:
>> >> No, what I am getting at is that you can't go around and modify the
>> >> configuration space for every possible device out there. Th
Hi Longman,
All compared data is from the below operation in spinlock-test.patch:
+#if ORG_QUEUED_SPINLOCK
+ org_queued_spin_lock((struct qspinlock *)&pa.n->list_lock);
+ refill_fn(&pa);
+ org_queued_spin_unlock((struct qspinlock *)&pa.n->list_lock);
+#else
+ new_spin_lock
Please pull this updated set, which now includes a fix for SELinux policy
processing (regression introduced by fa1aa143ac4a), as well as the
previously posted fix for the user-triggerable oops in the Keys code.
---
The following changes since commit 6ffeba9607343f15303a399bc402a538800d89d9:
You are right. Reset it to zero is not necessary.
2015-11-25 23:13 GMT+08:00 Matias Bjørling :
> On 11/25/2015 01:42 PM, Wenwei Tao wrote:
>>
>> When nvme devices were removed, we need to handle the targets
>> build upon them properly: remove the existing targets, block
>> creations of new ones. T
> "Arnd" == Arnd Bergmann writes:
Arnd> do_div is the wrong way to divide a sector_t, as it is less
Arnd> efficient when sector_t is 32-bit wide. With the upcoming do_div
Arnd> optimizations, the kernel starts warning about this:
Applied.
--
Martin K. Petersen Oracle Linux Engineering
On 2015/11/26 3:35, Arnaldo Carvalho de Melo wrote:
Em Wed, Nov 25, 2015 at 11:30:59AM +, Wang Nan escreveu:
If libelf unable to open debuginfo for an offline module but the ko has
symtab, something unexpected may happen.
# rm -rf ~/.debug/
# mv /usr/lib64/elfutils/libebl_x86_64.so{,.
Something unexpected may happen if copy statically linked perf to a
production environment:
# ./perf probe -m ./mymodule.ko my_func
[mymodule] with build id 326ab42550ef3d24944f53c817533728367effeb not found,
continuing without symbols
Failed to find symbol my_func in /home/wangnan/kmodule/mym
hi Shawn,
On 2015/11/25 20:24, Shawn Guo wrote:
> On Wed, Nov 25, 2015 at 05:49:02PM +0800, Xinwei Kong wrote:
>> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
>> use this I2C IP of Synopsys Designware for HiKey board.
>>
>> Signed-off-by: Xinwei Kong
>> Signed-off-by: Chen Fe
> On Wed, Nov 25, 2015 at 12:21 AM, Lan Tianyu wrote:
> > On 2015年11月25日 13:30, Alexander Duyck wrote:
> >> No, what I am getting at is that you can't go around and modify the
> >> configuration space for every possible device out there. This
> >> solution won't scale.
> >
> >
> > PCI config spac
Miroslav Benes writes:
> Currently, percpu symbols from .data..percpu ELF section of a module are
> not copied over and stored in final symtab array of struct module.
> Consequently such symbol cannot be returned via kallsyms API (for
> example kallsyms_lookup_name). This can be especially confusi
在 2015年11月25日 22:56, Heiko Stübner 写道:
Am Mittwoch, 25. November 2015, 15:59:35 schrieb Caesar Wang:
This patchset attempts to new compatible for thermal founding
on RK3228/RK3399 SoCs.
Signed-off-by: Caesar Wang
---
Documentation/devicetree/bindings/thermal/rockchip-thermal.txt | 2 ++
On Thu, Nov 26, 2015 at 10:28:10AM +0800, Bob Liu wrote:
>
> On 11/26/2015 06:12 AM, Konrad Rzeszutek Wilk wrote:
> > On Wed, Nov 25, 2015 at 03:56:03PM -0500, Konrad Rzeszutek Wilk wrote:
> >> On Wed, Nov 25, 2015 at 02:25:07PM -0500, Konrad Rzeszutek Wilk wrote:
> xen/blkback: separate ri
there is a time window between __mmc_send_status() and time_afer(),
on some eMMC chip, the timeout_ms is only 10ms, if this thread was
scheduled out during this period, then, even card has already changes
to transfer state by the result of CMD13, this part of code also treat
it to timeout error.
So
On Thu, 2015-11-26 at 09:20 +0800, Daniel Kurtz wrote:
> Hi Bayi, Matthias,
>
> Sorry for the late review, one comment below...
>
> On Wed, Nov 18, 2015 at 11:30 AM, Bayi Cheng wrote:
> > Add Mediatek nor flash node
> >
> > Signed-off-by: Bayi Cheng
> > Acked-by: Brian Norris
> > ---
> > arch
Audio IP need the spba clock, but original clock name "dma" is not
accurate, so change it to name "spba". The audio driver has been
using the new name "spba", the binding document has been updated.
Signed-off-by: Shengjiu Wang
---
arch/arm/boot/dts/imx6qdl.dtsi | 6 +++---
arch/arm/boot/dts/imx6
1 - 100 of 991 matches
Mail list logo
