Hi,
Since some days, I cannot update my apt-repos anymore, because of
problems with the FAI-key:
W: GPG error: http://fai-project.org wheezy Release: The following
signatures were invalid: BADSIG DC13E54EAB9B66FD Thomas Lange
I just downloaded and added Thomas' new FAI repo key to my trust
Thanks a lot!
Now it works again!
Regards
René
On 02/03/2014 02:30 PM, Thomas Lange wrote:
On Thu, 30 Jan 2014 09:01:13 +0100, René Bleisch
said:
> W: GPG error: http://fai-project.org wheezy Release: The following signatures
were invalid: BADSIG DC13E54EAB9B66FD Thomas Lange
So
Just a comment to the new release.
As I perfromed a softupdate on all my clients, the FAI-client was also
updated to 4.1 on each client.
In the following, I ran into problems, because "task_finish" is now also
executed during softupdates (see also changelog).
In my case, I have a hook-script "
Hi,
I use multi-arch support since quite some time and never got error or
warning messages.
Thats my script:
echo "Enable multiarch support"
$ROOTCMD dpkg --add-architecture i386
$ROOTCMD apt-get update
$ROOTCMD apt-get install -y --force-yes ia32-libs
echo "Install Ado
FS_CLIENT/10-create-directories has unsupported type awk script,
ASCII text".
- Does anyone also have this problem?
- Does anyone have a solution?
(I will also try to find one by myself)
Regards
René Bleisch
pt, ASCII text executable
(2) Could it be something specific in your script? Try deleting parts of
the script (in a copy, of course) and see if "file" starts detecting
correctly after some specific part of the script is gone.
If you can show what exactly causes it, you may file a b
Hi Robert,
I was faster than you :-( (should have informed fai-mailing)
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742262
Regards
René
On 03/21/2014 01:31 PM, Robert Schüttler wrote:
* René Bleisch [2014-03-21 12:08]:
Apparently, something went amiss with the linux "file&quo
sorry,
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742265
(and you were a bit faster than me...)
On 03/21/2014 01:49 PM, René Bleisch wrote:
Hi Robert,
I was faster than you :-( (should have informed fai-mailing)
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742262
Regards
René
On
Thanks a lot for your suggestion, this temporary fix also works for me!
Regards
René
On 03/21/2014 01:41 PM, Ralf Utermann wrote:
On 21.03.2014 13:10, René Bleisch wrote:
Hi Toomas,
Both PCs are wheezy (Linux ... 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64
GNU/Linux)
"file"-versi
Just a comment:
Today I wanted to install a new host (the first since one or two months),
however I ended up with the same dracut error...
It seems that now "nfs" is needed at the begin of the NFSROOT entry in
nfsroot.conf, to get dracut to recognize the fai-server
NFSROOT=*nfs:*phkup26:/srv/f
up {
server-name "kuppacific.unibe.ch";
next-server phkup26;
use-host-decl-names on;
filename "fai/pxelinux.0";
...
This worked for years with the old FAI-server
On 04/25/2014 10:57 AM, Thomas Lange wrote:
On Fri, 25 Apr 2014 09:13:35 +0200, René Bleisch
. root=nfs:phkup26:/srv/fai/nfsroot in the tftp-file),
->hence I will stay with this until maybe the dracut guys fix the bug
Regards
René
On 04/25/2014 01:49 PM, Thomas Lange wrote:
On Fri, 25 Apr 2014 13:38:47 +0200, René Bleisch
said:
> dracut ? (where can I find this out?)
It
variable LOGDIR=xy in fai.conf
and replace the hard-coded logfile-path in the code with
$LOGDIR/fai-make-nfsroot.log
Regards
René Bleisch
PS: I use fai 4.1 on wheezy
download";
also for Ubuntu 14.04/trusty? (I remember having heard something in
former e-mails)
Regards
René
On 07/07/2014 02:48 PM, Thomas Neumann wrote:
On Monday 07 July 2014 11:05:11 René Bleisch wrote:
I already have a FAI-server for my workstations (wheezy). Now I'm trying
to se
/2014 10:39 AM, Thomas Lange wrote:
On Tue, 08 Jul 2014 16:25:51 +0200, René Bleisch
said:
> I had quite some problems to solve:
> - I had to chmod /srv/tftp/fai_ubuntu/initrd... from "-rw--"- to
"-rw-r--r--" (seems to be a known problem)
I;m windering
ct" template is used. I only have to enter
the password at the beginning, then expect will automatically handle it
for each parallel ssh-session.
I hope this helps you
Regards
René Bleisch
On 09/19/2014 12:37 PM, Jan Bredereke wrote:
Dear FAI users,
I am currently evaluating FAI and
Hi Robert,
I would appreciate it if you update the Wiki!
I operate a wheezy FAI-server with wheezy workstations since quite some
time.
Additionaly I operate a couple of Ubuntu server machines (10.04 LTS,
12.04 LTS, 14.04 LTS). Now I plan to also automate the
installation/configuration process
Hi Robert,
thanks a lot!
I just went over your new wiki page.
I will test it, when I find some time.
Small note concerning problems with NFS v4 in NFS section:
When switching my FAI server from Debian squeeze to wheezy, I had also
much trouble with NFSv4 (exports, idmapd)...
Finally I got it to
> Did anyone stumble over other maybe important jessie-related issues?
Regards
René
--
Dr. René Bleisch
University of Bern
Climate and Environmental Physics
Sidlerstr.5
3012 Bern
Switzerland
Phone: +41 31 631 34 02
Mail: blei...@climate.unibe.ch
Hi Dirk
I'm also running several jessie-clients now without serious problems,
I'm using dracut too.
I dont see any "systemd-tmpfiles" messages in my syslogs.
Just a question: are you trying to use "pure" systemd or both systemd
and sys-v-init together?
As far as I know, standard jessie uses both
Dear FAI-Users,
today I installed an Ubuntu Trusty Client from my Debian/wheezy nfsroot
(which I use for all Debian and Ubuntu clients).
during the installation, suddenly some "/bin/bash: error importing
function definition for `BASH_FUNC" errors where thrown.
The installation seems to succed - th
On 06/19/2015 03:54 PM, Thomas Lange wrote:
>>>>>> On Fri, 19 Jun 2015 15:09:38 +0200, René Bleisch
>>>>>> said:
> > today I installed an Ubuntu Trusty Client from my Debian/wheezy nfsroot
> (which I use for all Debian and Ubuntu clients).
>
Hi John,
FAI is missing a basefile ( /var/lib/fai/config/basefiles/CLASS.tgz )
You should create a basefile for Ubuntu vivid as described here:
http://wiki.fai-project.org/wiki/Installing_Ubuntu_Linux_with_FAI#Creating_the_basefile
Regards
René
On 06/30/2015 04:30 PM, John G Heim wrote:
> Durin
Good morning,
I just stumbled over an already known problem, when I tried to install a
host yesterday.
The installation didn't even start because dracut tried to mount the
nfsroot from my dhcp-server, which is not on the same machine as the
fai-server machine ...
This occured because I recently r
Hi Thomas,
thanks for your tipp with the template option of fai-chboot
Really a useful tool - I didnt know it yet
It seems to work with it
Thanks a lot!
René
On 07/01/2015 11:43 AM, Thomas Lange wrote:
>>>>>> On Wed, 01 Jul 2015 08:35:16 +0200, René Bleisch
>>>>
Hi Stefan,
I'm using the test feature.
If I understand you correctly, your script is named
"/srv/fai/config/tests/BASE".
This will not work, as "task_test" checks for class-wise folders with
scripts in it (like "task_configure" does it in /srv/fai/config/scripts/).
You have to create a folder f
Hi,
I just ran into problems when I tried to install a xenial client with my
new xenial-config.
The installation got stuck due to a read-only filesystem - similar to
Erwanns (11.2.2016 "NFSROOT mounted on /") and Dirks case ( 27.5.2016
"no writeable /tmp on PXE-Boot...").
As in Erwanns case,
Hi,
I just stumbled over a systemd/journald related problem which may also
affect FAI installations.
Some days ago, when booting a freshly installed PC (Debian jessie) for
the first time, journald could not be started, which means there is no
error logging at all:
"systemd[1]: Failed to star
d sample config...)
Maybe I should start to check your sample config scripts on a regular
basis ;-)
Regards
René
On 12.01.2017 15:37, Thomas Lange wrote:
On Thu, 12 Jan 2017 14:31:00 +0100, René Bleisch
said:
> I just stumbled over a systemd/journald related problem which may also
affect
Dear all,
I just had problems with a FAI-installation.
Everything went ok until "task_repository".
But then the "apt-get update" failed:
Calling task_updatebase
Updating base
Ign file: KUP/ InRelease
Get:1 file: KUP/ Release.gpg [490 B]
Get:2 file: KUP/ Release [844 B]
Ign file: KUP/ Translation-
has.de wrote:
Hi,
On Mon, Aug 14, 2017 at 11:42:11AM +0200, René Bleisch wrote:
=> does someone have a FAI-setup where apt-https is working during
installations?
yes, but we use debootstrap.
=> is the nfsroot even the right place to add packages which should already be
installed before &quo
31 matches
Mail list logo
