Hello List
The attached patch (written by Dirk Herrendoerfer) adds support for the
builtin tuner of the samsung smt7020 box ( based on an Intel830 board ).
It would be fine to see this one inside the v4l tree.
--
Helmut Auer, [EMAIL PROTECTED]
diff -purN v4l-dvb.orig/linux/drivers/media
;
>
> just replace printk with a dprintk
>
>
Sure I know, but I am not a dvb developer.
This issue was reported over a year ago and is still not fixed in the
repository...
A little bit offtopic:
The user who reports this is using a Pinnacle DVB-S 400i and this card
has very b
574256
May 27 21:46:43 [kernel] cx24108 debug: select vco #6 (f=1574256)
May 27 21:46:43 [kernel] cx24108 debug: pump=0, n=48, a=20
May 27 21:46:44 [kernel] cx24108 debug: entering SetTunerFreq, freq=1588000
May 27 21:46:44 [kernel] cx24108 debug: select vco #7 (f=1588000)
--
Helmut Auer, [EMAIL
+45,7 @@
u32 lastesn0;
};
-static int debug;
+static int debug = 0;
#define dprintk(args...) \
do { \
if (debug) printk(KERN_DEBUG "cx24110: " args); \
--
Helmut Auer, [EMAIL PROTECTED]
___
linux-dvb ma
Helmut Auer schrieb:
With this patch my TTs1401 works much better than without.
The BER's are gon and I can receive all channels fine
Why is this patch not in the current hg tree ?
Hi,
Sorry for posting again :)
With this patch it sometimes takes a long time til a channels is tuned.
With this patch my TTs1401 works much better than without.
The BER's are gon and I can receive all channels fine
Why is this patch not in the current hg tree ?
Is there no one responsible for this ?
What's to do to get it integrated ?
--
Helmut Auer, [EMAIL
tches both, tda10086 and tda8263
I expect that the signal strength still is lower, but also the BER
which is more important.
With this patch my TTs1401 works much better than without.
The BER's are gon and I can receive all channels fine
Why is this patch not in the current hg tree ?
--
Helm
build (>=106-r4) for gentoo does
contain /etc/modprobe.d/blacklist with an entry to disable evbug autoloading.
blacklist evbug
Thanks for the info,
I will go the easiest way and rename the evbug module :)
--
Helmut Auer, [EMAIL PROTECTED]
___
l
uot;, usb-:00:1f.2-1/input0
evbug.c: Connected device: "HID 1267:0103", usb-:00:1f.2-1/input1
evbug.c: Connected device: "DVB on-card IR receiver", pci-:01:09.0/ir0
I am using v4l-hg from 31.3.
--
Helmut Auer, [EMAIL PROTECTED]
___
t want
to give these to people not being able to use these.
-- Helmut Auer, [EMAIL PROTECTED]
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
dreas
Hello,
Are the DVB-driver developers aware of this problem ?
I am surprised to see no comments here. For some VDR-users the UPT- or
datastream broken error is a great pain.
--
Helmut Auer, [EMAIL PROTECTED]
Hello,
I just "grepped" through the dvb driver documentation, and I didn't find
anything about the parameters for dvb-ttpci ( like vidmode ... ).
Am I missing something, or are these features undocumented ?
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a
Check the existence of the firmware file /usr/share/hotplug/tda1004x.fw
Are you sure about that ???
Normally this is /usr/share/hotplug/tda0014x.bin or .mc,
I thought it must be located under /usr/lib/hotplug/firmware.
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to
Hi,
When compiling the brand new kernel 2.6.6-rc3 with gcc 3.3.2 I get the
warnings:
Warning: "errno" [drivers/media/dvb/frontends/tda1004x.ko] undefined!
WARNING:
/lib/modules/2.6.6-rc3/kernel/drivers/media/dvb/frontends/tda1004x.ko
needs unknown symbol errno
--
Helmut Auer, [EMAIL
econds to load on my system.
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
One ( hopefully ) last point:
It often happens after startup the first channel is not displayed by
vdr, that means, I have to switch once and the everything works fine. Is
that a vdr or dvb problem ?
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL
fine.
Where can I read what all these parameters are doing ?
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
:
S19.2E 11700 V 9750 v [E0 10 38 F0] [E1 10 38 F0] [E1 10 38 F0]
...
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi Andreas,
-0x80, 0x00, 0x31, 0xb0, 0x14, 0x00, 0xDC, 0x00,
+0x80, 0x00, 0x31, 0xb0, 0x14, 0x00, 0xDC, 0x20,
just to clarify: my ves1x93.c has the following contens:
0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xDC, 0x00,
^
What should I try now ?
--
Helmut Auer
Hi,
Helmut Auer schrieb:
Once again ( I don't give up too fast . Isn't here anyone
experiencing the same problem ? On vdrportal the same error is reported.
Do I have to use different diseqc settings ? What has changed from
1.01 to 1.10 in that region ?
It is definitely a ves1x93-pr
also tried your diseqc setiings, but with these I can't switch to any
channel !
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hello Oliver,
Hello, I have a reproducable error with the 1.1.1 release. When
zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black when
reaching SAT1, and afterwards I can tzap to whatever I want. The
screen stays black. With 1.0.1 everything works ( and zapping is
faster ). I am usi
Helmut Auer wrote:
Hello, I have a reproducable error with the 1.1.1 release. When
zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black when
reaching SAT1, and afterwards I can tzap to whatever I want. The
screen stays black. With 1.0.1 everything works ( and zapping is
faster ). I
Helmut Auer wrote:
Hello,
I have a reproducable error with the 1.1.1 release.
When zapping: ARD, ZDF, RTL1, RTL2, VOX, SAT1 the screen gets black
when reaching SAT1, and afterwards I can tzap to whatever I want. The
screen stays black.
With 1.0.1 everything works ( and zapping is faster ).
I am
Kernel with vdr 1.35 ( I don't use 2.6.x anymore,
because then I cannot switch back to the good old drivers ;-)
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
system.
Unloading kernel modules is enabled, but not forcing.
Any hints what I can try or what I am doing wrong ?
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
etc/devfs.d an I've also executed modules-update.
There is an interesting difference to my old 24.18 system:
after modprobing the module ves1820( for my fsc-cable ) is loaded but
not in use, on the old system ves1820 was in use after modprobing.
Any hints what's going wrong here ?
-
heck this out ?
If yes I can send him a card for testing.
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Niklas Peinecke wrote:
Helmut Auer wrote:
Hello,
There is a new SkyStar2 available:
http://www.usa-x.org/dvbforum/viewtopic.php?t=975
Is here anybody already using this card ? Will it work with the
current drivers ?
I have not yet seen this card myself, but AFAIK the entire 2.6 series
is
Hello,
There is a new SkyStar2 available:
http://www.usa-x.org/dvbforum/viewtopic.php?t=975
Is here anybody already using this card ? Will it work with the current
drivers ?
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linu
at to mean).
Sorry for that :P
No problem :-) It's christmas time so we all are a bit confused :-)
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
n, If you use a
Male SCART Connector directly to your TV you have use the IN Connection.
A usual SCART Cable crosses these conections inside, that means e.g. Pin
2 is connected to Pin 1 on the other side
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [
Michal Dobrzynski wrote:
On 23/12/2003, at 8:19 PM, Helmut Auer wrote:
Hello,
The main Problem can be the cable you are using, and the length of it.
I would suggest to connect the J2 to a female SCART connector with a
short ( and if possible shielded ) cable connection ( ~ 30 cm ).
You have to
that in this cse the pins 1-2, 3-6 and 19-20 must
be crossed.
Then take a high quality Scart-Cable and it should work fine
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
changes
out there?
Holger
Hello,
Sure there is interest ! All vdr folks which I know are not using the
dvb-kernel tree and some of these want to buy a budget card, but nor the
actual Skystar2 either the actual TT Budget card is working flawlessly :-(
--
Helmut Auer, [EMAIL PROTECTED
card to him. Is anyone
interested ?
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
iction, or is
it possible that the "Kabelpeitsche" does not provide the RGB signal ?
-
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
only one with such symptoms.
---
Helmut Auer
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
SSDVB RECEIVER
COMATLAS27288A
and a small one:
Mitel SC
SP5659
9949B ( ?? Not sure - its difficult to read )
Is that what could be expected on a 1.3 card ?
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
WinDVBLive
could not handle this card.
I decided to sell this card via Ebay, but is here anyone interested in further
tests ? If yes what should I do to track down the problem ?
--
Helmut Auer, [EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dv
Hello,
I have a DVB rev. 1.3 where the SAA7146 driver does not load ( SAA7146:
No such device ).
lspci says the following:
Philips Semicond. Unknown device 6146 Rev. 01
Subsysten Technotrend Unknown device
Flags: Busmaster, VGA palette snoop, stepping, fast Back2Back, 66 Mhz
user-definable
Hello,
Is this card supported by the linux-dvb drivers ?
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=3405129550
The tuner is a BSRV2-301a
The chips are the following:
SPARTAN XCS40XL
PQ208AKP9945
A2039214A
GAL Vantech
GVT7132D327T-7
c34057-1
TS9806D
--
Helmut Auer, [EMAIL PROTE
There are other cheap budget cards. The upcoming Flyvideo DVB card
e.g. is easy to support. Maybe there also is some really good
competition for the big TT cards very soon ...
What about the cheap B2C2 card ? It would be great to use a 30 Euro card
under linux and vdr.
-
Helmut Auer
43 matches
Mail list logo
