On Saturday 29 December 2007 18:58:21 Jan D. Louw wrote:
> Hi List,
>
> Attached is a new driver for the Zarlink ZL10313/ZL10039 based Compro
> S350/S300 budget DVB-S cards. Everything except 2 way diseqc should work.
I tested this on a S300, so it would be nice if someone with a S350 can confir
Kurt,
It works here with VDR (thanks to Reinhard Nissl - there is a wiki out
there that describes the process)
And I am myself working on a MythTV fix to let it work there. Currently
DVB-S works. When things are stable I will post it to the list.
Regards,
Mario
On Fri, 2007-12-28 at 12:55 -06
Hi Steven.
- Original Message
From: Steven Toth <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Cc: linux-dvb@linuxtv.org
Sent: Saturday, December 29, 2007 6:15:33 PM
Subject: Re: [linux-dvb] firmware xc3028-v27.fw ?
[EMAIL PROTECTED] wrote:
> I installed two items in my machine recently
> 1)
[EMAIL PROTECTED] wrote:
> I installed two items in my machine recently
> 1) Hauppage hvr950
> 2) Hauppage pvr 1800
>
> To get them to work, I built and installed from
> http://linuxtv.org/hg/v4l-dvb. The compile and install went well, but I
> get the following in /var/log/messages:
>
> xc2028
I installed two items in my machine recently
1) Hauppage hvr950
2) Hauppage pvr 1800
To get them to work, I built and installed from http://linuxtv.org/hg/v4l-dvb.
The compile and install went well, but I get the following in /var/log/messages:
xc2028 2-0061: Error: firmware xc3028-v27.fw not
Thank you very much for your information!
However, after seing that the only part that currently works is the analog I
preferred to return the card and buy a Hauppauge HVR-4000. For what I've
seen there is at least some DVB-S support for it (which mostly interests me
now...), and a pretty hard dev
On Freitag, 28. Dezember 2007, Eduard Huguet wrote:
> Hi,
Hi Eduard!
> I've just bought this device, and I'd like to know if there is any
> possibility that is soon supported under Linux. Currently it seems it's
> not, but I really don't know how's the state on it actually.
>
Until now it is
Thanks, this solved the problem.
Now I'm able to tune and watch channels but I noticed an interesting thing:
I'm running femon, the signal strength and snr seems ok, if I run szap then
the signal strength falling down (but the channel is tuned):
coda:/usr/src/linuxtv-dvb-apps-1.1.1/util/szap$
>>>Attached patch is off the dvb-apps mercurial repo for scan.c. This adds
>>>the following additional support to the scan tool -
>
> with your patch is it possible to scan dvb-s2 channels ?
> did you look the http://jusst.de/manu/scan.tar.bz2 ?
>
> Igor
I don't have access to any DVB-S2 signals,
I'm seeing this with a Nova-T stick and kernel 2.6.23 upon a cold
boot. If I then reboot it will be fine.
Sim
On 21/12/2007, Jordi <[EMAIL PROTECTED]> wrote:
> Hi,
>
> When I plug my Hauppauge WinTV Nova-TD stick into an Asus Pundit AB-P 2600,
> it is detected as a full speed USB device. It shoul
The decoder/bridge IC reads "saa7133HL/101"
The 18 pin IC reads
"A T8P56S
HBIHG 709"
After running lshal I got
udi = '/org/freedesktop/Hal/devices/pci_1131_7133'
info.bus = 'pci' (string)
info.linux.driver = 'saa7134' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_26
Hi List,
I'm trying to install a new Pinnacle DVB-T tuner with Flash Stick
(ID 2304:0228).
Is it supported?
Any help would be greatly appreciated.
Thanks!
Ivan
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/
Hi List,
I'm trying to install a new Pinnacle DVB-T tuner with Flash Stick
(ID 2304:0228).
Is it supported?
Any help would be greatly appreciated.
Thanks!
Ivan
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/
bbee <[EMAIL PROTECTED]> writes:
> I do remember seeing a few DVB-C cards that have a CAM slot hanging off a
> flatcable, for use in a floppydrive slot.
The only ones I have found are "full-featured", and those can't
receive HDTV.
> Just out of curiosity, do you have the same problem I've been
En/na Steven Toth ha escrit:
> Personally, I don't knw much about our USB v4l trees, or whether it will
> be simple enough to add (atleast analog) support. Looks like digital
> might be done via the AF9013, but that's a guess and I'm not familiar
> with it, I think this is an Auvitek part.
afa
I am running Debian "stable" on an AMD64 box. I have a recently acquired a
Hauppauge WinTV-HVR 1600 model 74021. (I thought that Linux drivers were
available.) My computer skills are less than expert, but better than novice. I
am willing to provide some testing time.
This morning I tried to ins
Hello !
I bought such a SkyStar2 2.7V .
$ lspci -vnn
05:01.0 Network controller [Class 0280]: Techsan Electronics Co Ltd B2C2
FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103] (rev 02)
Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip /
Technisat SkyStar2 DVB ca
Greetings all,
I recently switched from Windows to linux and I am currently running kubuntu
7.10. I received a Pinnacle PCTV HD Card (800i) pci card from my family, and I
am having some trouble getting linux to recognizing this card. I was hoping to
use myth tv to record some shows, but becaus
>>Attached patch is off the dvb-apps mercurial repo for scan.c. This adds
>>the following additional support to the scan tool -
with your patch is it possible to scan dvb-s2 channels ?
did you look the http://jusst.de/manu/scan.tar.bz2 ?
Igor
___
linu
19 matches
Mail list logo
