That actually worked.
Thanks a lot!
On 2016-08-22 23:01, Daniel Golle wrote:
On Mon, Aug 22, 2016 at 10:30:42PM +0200, Jochen Demmer wrote:
Thank you everybody,
I've been trying for 2 hours straight to unbrick via serial, using a
prolific pl2303 adapter but without success.
I tried screen, pi
Am 22.08.2016 um 22:30 schrieb Jochen Demmer:
> I've been trying for 2 hours straight to unbrick via serial, using a prolific
> pl2303
> adapter but without success.
I'm using a prolific pl2303 too. I did bye it at reichelt.de.
> I tried screen, picocom and minicom. I tried Apple's terminal emul
On Mon, Aug 22, 2016 at 10:30:42PM +0200, Jochen Demmer wrote:
> Thank you everybody,
>
> I've been trying for 2 hours straight to unbrick via serial, using a
> prolific pl2303 adapter but without success.
>
> I tried screen, picocom and minicom. I tried Apple's terminal emulator and
> iTerm2. Go
Thank you everybody,
I've been trying for 2 hours straight to unbrick via serial, using a
prolific pl2303 adapter but without success.
I tried screen, picocom and minicom. I tried Apple's terminal emulator
and iTerm2. Got me a Mac and then Linux. Desperate as I am also
connected another C7.
On 20/08/16 22:35, Jochen Demmer wrote:
Hi,
yesterday I bricked an Archer C7 v2 by installing some homebrew
(buildroot) lede firmware.
I've only once encountered an issue which I can only assume was a bad
flash. It's a few months ago so memory is vague. The serial console
was booting li
* e9hack [22.08.2016 09:12]:
> Am 20.08.2016 um 23:35 schrieb Jochen Demmer:
> > yesterday I bricked an Archer C7 v2 by installing some homebrew (buildroot)
> > lede firmware.
i have seen similar behaviour, when your ath10k-card is
"wrong" configured, e.g. adhoc+ap - please double check this.
b
Am 20.08.2016 um 23:35 schrieb Jochen Demmer:
> yesterday I bricked an Archer C7 v2 by installing some homebrew (buildroot)
> lede firmware.
> It got stuck in a boot loop and it's also not reachable on 192.168.1.1 on any
> time during
> boot whatsoever. No failsafe mode.
Archer C7 v2 can be un-b
Hi,
yesterday I bricked an Archer C7 v2 by installing some homebrew
(buildroot) lede firmware. It got stuck in a boot loop and it's also not
reachable on 192.168.1.1 on any time during boot whatsoever. No failsafe
mode.
Today I tried an Archer C7 v1 and it also got stuck in a boot loop after
