Am 22.08.2016 um 22:30 schrieb Jochen Demmer: > I've been trying for 2 hours straight to unbrick via serial, using a prolific > pl2303 > adapter but without success.
I'm using a prolific pl2303 too. I did bye it at reichelt.de. > I tried screen, picocom and minicom. I tried Apple's terminal emulator and > iTerm2. Got me > a Mac and then Linux. Desperate as I am also connected another C7. > I tried like a whole bunch of different settings but no matter what, I get > gibberish > characters. > > ./picocom /dev/ttyUSB0 -b 115200 -y n -d 8 -p 1 > > These are the settings I think they should be set to, but it just won't work. I'm using TeraTerm for Windows. > Actually only RX and TX are connected, because when I connect GND the serial > connection > freezes and let USB subsystem crash. Connecting VCC doesn't seem like a good > idea, too. > Any hints? GND must be connect. Vcc is 5V on most of the pl2303 cables/adapters. It must not be connect. The OpenWrt wiki has two pictures for the connector. The correct pinout is: 1 - TxD (white RxD) 2 - RxD (green TxD) 3 - GND (black) 4 - Vcc (open) The colors are from my cable. Regards, Hartmut _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
