ever since switching to comcast cable telephone for my provider my kvs-50
does not appear to receive enough of a drop in voltage after a caller hangs
up for the kvs-50 to stop the recording secquence. The result is that it
records the message "If you need to make a call please hang up and try
agai
Complete the circuit
An elderly lady phoned Verizon to report that her telephone failed to ring
when her friends called - and that on the few occasions when it did ring,
her
pet dog always barked right before the phone rang.
The telephone repairman proceeded to the scene, curious to see t
Howdy!
Can anyone suggest a good use for the flexable buttons #'s F1, F2, F3, F4 on
my KX-T7030 sets on my home/home office system with a KXTA 624 and KVS-50?
I'm assuming Flexable means they can do something useful. What might that
be? (they gotta be good for something right?)
___
This just started today in my own home! :
All 7030 handsets are displaying form left to right :
+ (then a tall filled in rectancle) and pq that look attached inbetween
Then towards the middle of the display a 1
Then the time displayed normally on the right
is this a friggin leap year o
I just went in and out of programming to try to reset the time and date. It
is turning out to be the date that is the problem..in particular the month.
I can't seem to get ANY month to come up un the display...only the same
jibberish as before, even after changing the date from 1 to 31.
Any other
http://www.getsomesoft.net/Business/Miscellaneous/5077-Programmator-for-Pana
sonic-KX-TA308-616-624.html
anyone have any luck with this?
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/lis
Can I check the firmware version from a Propritary Phone on EXT 01? What
program # is it?
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
It was the month that wouldn't display properly. I found that entering
programming with password and reprogramming the time and date in slot 000
did not help. Without entering programming with password entered 0 and set
date and time without any problem. Month is displayed normally now. Musta
b
Is there an easy way to find out my firmware version on my KXTA-624 from a
propriitary phone?
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
Do any of the KXTA or KXTD systems allow you to call in from off site and
make an "all call" page over the speakerphones. If not, is there a work
around to allow this?
Doug
_
KX-T Mailing list --- http://kxthelp.com/
Subscription ch
The only paging from off site, I am aware of, is either a pre recorded
announcement ie "I have a call for" + mailbox name or using Caller ID
"Caller ID Name" + "is calling".
What I am in the need of doing is calling in and getting an open mic, like
hitting ICOM 339, only from off-site.
I am having a helava time trying to get the numbers programmed into system
programming for speed dial to dial using autodial and the speeddial number,
or to dial from one touch from the F1-F4 buttons on my 7030 handsets.
I set up a few numbers to speeddial slots 00 thru 04
assigned F1 similar num
OK wow that was it! Thank you again! I figured that wasn't neccessary
since co1 was primary when you hit speakerphone here. Is there a way to do
it so I don't have to enter a 9 as the first digit in every speed dial
number?
_
KX-T
ere so we won't miss it. Anyway the spec will follow for anyone who is
interested.
Doug Brander, President
Brander Alarm & Electric, Inc
[EMAIL PROTECTED]
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: ht
Is there a Panasonic system to meet this spec?
Doug
The PBX system must have the following features:
1. Expandable to multiple chassis if required
2. Compact size. It will be installed in an enclosed rack.
3. Support 5 small businesses
4. Support door intercom and provide contact closure fo
Having a srtange problem that just started. I have only one extension with
two phones: one propriatary and one SLT. Propriatary works fine, but when
you pick up the SLT the speaker is activated on the propriatary phone
causing feedback. I used to be able to dial 9 on the slt to get an outside
l
Jim Schultz quessed it this time! BGM Again!Last time it was BGM
that caused backround noise on the sets speakers. This time, with an analog
phone in parrallel, it caused feedback when the analog phone was lifted.
At this point I'm thinking it's time to hook up some audio to the damn aud
FYI I have Vista loaded on my new machine and it works [fairly] well, with
some pretty handy little improvements over XP. My big problem was my
software not being Vista compatible. I found MS has a free download for
Vista Ultimate (I think it works with some other versions also) called
virtual mac
No not stolen..just hot.very hot. 7895 phones. This is the second time a
7895 has done this while being charged - a couple of times on my phone and
now on one of my customers cordless. Is this an indication of a faulty
battery, maybe just not sitting correctly in the base while charging,
handset
Customer has a 624 systems I installed a few years ago(!)- still working.
Should be headed for the Smithsonian soon.
Updated firmware a few years back, so not just 20 cid users logged per
extension - more like 200 in the KSU (I believe that was one of the benefits
of the upgrade).
When I
20 matches
Mail list logo
