i'll try, panasonic handles calls in terms of ownership. an icm call
from ext 114 (owner of the call) to vm will send "follow-on id" of the
ext to the vm, and put you right into that mailbox. At night, an
incoming outside call is routed by dil 1:1 to 114, so the ksu has given
ownership of th
Dear Amin Kath,
Thanks a lot for your very kind help. I was really hopeless with the card
since I also starting to think that the card might damage.
As with your suggestions and very thorough tips, I changed to A1,A2,C in
#109 and now it works perfectly. I have tried all of the settings and also
On our co's we needed a pause AFTER the *82 and before
the number. (press "pause" while entering numbers) I
think that depends on the telco switches, some might
not need the delay.
-1 should handle pause for 9xxx on it's own
without adding the pause. (there is also a "dial
start" timer that
Also if you have a TVS200/100/75 in dpits integration, they seemto mess with
sync. We power them down till the cabinets are in sync.
Kerry
- Original Message -
From: larry <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, February 22, 2002 2:36 PM
Subject: Re: KX-T
sure a master/slave switch didn't get bumped?
also, it's easy to break a wire on the tie cable!
also, if you have modules (esp 185) make sure the
doors are closed! (unless you do our grounded hinge
mod ;-)
1. If they are not synced, you should be able to call
a slave ext from a slave ext (te
5 matches
Mail list logo
