Try changing the DTMF time to 160 ms (404) for that line
Kerry
- Original Message -
From: "Marc" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, August 16, 2006 4:43 AM
Subject: KX-T: Touch Tone Dialing on TD308
> I’m not sure if this is specific to the TD308, or all of the TD systems…
>
>
>
I think program 991 will do what you need but I am not sure as I have never
tried it.
Kerry
- Original Message -
From: "JGALVEZ" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, November 18, 2004 10:40 AM
Subject: RE: KX-T: COS 3 only dial 7 digits
>
Have you run the printer alignment in the Desi program? Also some printers
will pull the paper hard when they are low on papertry putting some paper
under it if you didn't have some already.
Kerry
- Original Message -
From: "Jeff Bagnall" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sen
er ID,
you might want to put a butt set on the CO side to to see if you are getting
a ring that is being absorbed by the switch.
Kerry Smith
- Original Message -
From: "Jim McAtee" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday,
/ modem
> What is the behaviour with ARS?
>
> - Dial '9', CO are not assigned immediatly
> - Dial number, as soon Leading digit are reconized good CO is assigned?
>
> Kerry Smith wrote:
>
> > You can use ARS and it wil
You can use ARS and it will choose the proper line based on the dialed
number.
Kerry Smith
- Original Message -
From: "Dominic Pageau" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, March 21, 2004 12:01 PM
Subject: KX-T: Howto choose CO with analog pho
nd free up the whole
600-699 range by placing th single digit "6" in the 3 ext block field.
Kerry Smith
- Original Message -
From: "Peter Kolbe" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, March 17, 2004 12:36 AM
Subject: KX-T: Ext 688
>
Don,
What are you trying to renumber it to. If it is 11 you will need to make
sure 110-119 are renumbered not to conflict first so that you have the
2-digit "11" free. We've used Two digit numbering schemes on 816s before
and essential had to wipe out all stations even those that didn't have the
- Original Message -
From: "John Burk" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, October 03, 2002 11:43 AM
Subject: KX-T: HISS ON DIGITAL PHONES
> I know the answer is out there.
Only Fox Molder
Program 202 from Phone programing; 1-12 rings
Kerry Smith
- Original Message -
From: "Steve Rosen" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 23, 2002 4:20 PM
Subject: KX-T: Rings Until Forward
>
> I have a KX-T816 and TVS50. I
David,
We too at times have sent in equipment for repair that has come back from
repair not in working condition only to have it blamed on the description we
gave to repair. If Panasonic replaced the HD and it is still saying that is
missing the system it is probably something in the drive elect
Hey guys, Look! Agreat opportunity to have your bank accounts drained.
Kerry
- Original Message -
From: "SANDRA SAVIMBI" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 18, 2002 6:39 PM
Subject: KX-T: (no subject)
Dear Friend,
This letter may come to you as a surprise
Charles,
If you are in a window instead of full screen(Alt. Enter switches) you can
use the paste button up top to paste from the point of the curser. This
would work al right for speed dials if you copy them from your source one at
a time. Should you need to get info out you can use the "mark"
Also if you have a TVS200/100/75 in dpits integration, they seemto mess with
sync. We power them down till the cabinets are in sync.
Kerry
- Original Message -
From: larry <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, February 22, 2002 2:36 PM
Subject: Re: KX-T: KX-TD 1232
We build a cable using RJ45 to DB Connecters that work for both. Build 2
25-Pin connectors and leave them on the units and carry a 9-Pin a 7'
straight through patch for the laptop.
25pin9pin
22
33
48
57
64
7
15 matches
Mail list logo
