Don't worry. The bullet-shaped tips are neatly added to the tubes without
changing their inner diameter . Actually, I could have done the same by
reshaping the tubes end. It should work, and if it doesn't, the fix is
easy: just cut the tips off. I should actually have less turbulent air
flow in
My Pitot/Static was built as per plans, and extended about 100mm below the
wing. I, too, was getting very accurate results. Only difference with your
set up: it is clamped to the outer rib of the left hand stubwing.
Incidentally, I just rebuilt my Pitot/Static unit, because the previous
one was
Same set-up with me, and it is accurate to a couple of Knots. Only damage
was the day when I overshot the runway and banged one of the lights of the
runway threshold.
Serge Vidal
KR2 "Kilimanjaro Cloud"
Paris, France
larry flesner
Envoyé par : krnet-boun...@mylist.net
2005-03-25 03:47
Veui
It wil work just fine. Mine are 8 mm tubing, which is somewhere in between
1/4" and 3/8". Now, as far as tips are concerned, my plan is to try and
find a pair of arrows tips from an archery shop. Durable, weatherproof,
aerodynamic...
Serge Vidal
KR2 ZS-WEC
Paris, France
"Glasseyegav"
Envo
Hello, Serge and other netters;
I custom make hickory bows and arrows. But, I don't quite understand what you
are talking about for the tip. "field points" are aerodynamic but lack the hole
in the middle. I also have a stock of arrow shaft and treaded inserts for
aluminum arrows. Those are hol
ubject: Re: Réf. : KR> Pitot Static
>
> Hello, Serge and other netters;
>
> I custom make hickory bows and arrows. But, I don't quite understand what you
> are talking about for the tip. "field points" are aerodynamic but lack the
> hole in the middle. I a
: Serge VIDAL/DNSA/SAGEM)
Objet : Re: Réf. : KR> Pitot Static
Hello, Serge and other netters;
I custom make hickory bows and arrows. But, I don't quite understand what
you are talking about for the tip. "field points" are aerodynamic but lack
the hole in the middle. I al
ot;KRnet"
Sent: Thursday, December 30, 2004 6:59 AM
Subject: Réf. : Re: Réf. : KR> Pitot Static
> Nothing fancy, really. My idea is simply to use threaded inserts for
> aluminum arrow tips. I will thread the pitot and static tubes accordingly,
> or maybe simply glue the tip at the en
8 matches
Mail list logo
