Thanks mr. Flesner for dedicating time and efforts.
On Wed, 20 Oct 2021 at 01:49, Flesner wrote:
>
> I took some photos this evening of my wing gap covers. Years ago (15+)
> I made covers with fiberglass but didn't like the way they turned out
> and I wanted to finish building and get on with
Or just
Tape either side of gap to protect the Paint Push foam into the gap
Sand level
Use roll of glass tape ( easiest, save cutting)
Epoxy or polyester about 3 to 6 layers wider then needed around the wing
When dry cut from wing
Peel off wing and trim to require size
Perfect fit to the wing
P
At 5000 feet and 150 mph the bad wrap on the right wing is not visible,
even up close.
https://www.dropbox.com/s/0anhru6vu4666xp/101009206.jpg?dl=0
Larry Flesner
-Please see LIST RULES and KRnet info at http://www.krnet.org/info.html
-Change list delivery opt
On 10/19/2021 6:51 PM, Flesner wrote:
I cut the material, lined up the bottom with the lead edge
+++
That should read "lined up the material with the trail edge"
Larry Flesner
-Please see LIST RULES and KRnet inf
Mark-
I found a good way to remove sticky adhesives. The CA (cyanoacrolyte) glue
accelerator (aka "kicker") spray works great for removing tape adhesive.
Much better than acetone or alcohol. Spray on and wipe off. You can find
it in a small 3oz bottle at any hobby stores. It works so well I'm
5 matches
Mail list logo
