KR> aileron pushrod +ends

One other concern I've heard is that cut threads are an opportunity for stress risers and aren't recommended for that reason. I'd either use an AN490 end or, like Bob Barrows does on his designs, weld a nut on each end of a 4130 tube as in the next to last photo on this page:

KR> aileron pushrod +ends

> At 06:20 AM 12/19/2012, you wrote: > >How about 1/4" 4130 rod, threaded at each end to accept rod end > >bearings?..aileron bellcranks. > > > I suppose that would work but you would only have to thread the bolt > on one end, not two. Whatev

KR> aileron pushrod +ends

Phil Can you send that to me too.  Thanks From: Phillip Matheson To: KRnet Sent: Tuesday, December 18, 2012 3:18 AM Subject: Re: KR> aileron pushrod +ends I need to get aileron pushrods and rod ends,does any place sell a kit or do >you order ever

KR> aileron pushrod +ends

At 06:20 AM 12/19/2012, you wrote: >How about 1/4" 4130 rod, threaded at each end to accept rod end >bearings?..aileron bellcranks. I suppose that would work but you would only have to thread the bolt on one end, not two. Whatever works for yo

KR> aileron pushrod +ends

How about 1/4" 4130 rod, threaded at each end to accept rod end bearings?..aileron bellcranks. -Original Message- From: Larry&Sallie Flesner Sent: Tuesday, December 18, 2012 9:18 PM To: KRnet Subject: Re: KR> aileron pushrod +ends At 09:17 PM 12/17/2012, you wrote: &g

KR> aileron pushrod +ends

At 09:17 PM 12/17/2012, you wrote: >I need to get aileron pushrods and rod ends,does any place sell a >kit or do you order elerything separtly. Dean Choitz 7858108319 Seve

KR> aileron pushrod +ends

I need to get aileron pushrods and rod ends,does any place sell a kit or do >you order everything separately. what >are most kr2s using thanks Dean >Choitz >7858108319 -- My KR2 has all push rods for all controls, 45 hours now, they are

KR> aileron pushrod +ends

Dean Choitz wrote: >I need to get aileron pushrods and rod ends. Does any place sell a kit or >do you order everything separately? Most KRs use cables, but my next plane will also have aileron pushrods. It may be a little heavier, but if one falls off, at least the other side still works! I

KR> aileron pushrod +ends

>I need to get aileron pushrods and rod ends,does any place sell a kit or do >you order elerything separtly. what >are most kr2s using thanks Dean Choitz >7858108319 Dean, There are no kits that I know of however here is a link to what you need for the rod end bearings used in place of hinge

KR> aileron pushrod +ends

I need to get aileron pushrods and rod ends,does any place sell a kit or do you order elerything separtly. what are most kr2s using thanks Dean Choitz 7858108319