s, NM
> - Original Message -
> From: Robert Boyd
> Sent: 11/30/12 09:12 AM
> To: KRnet
> Subject: Re: KR> Wheel Wobble
>
> All good points Peter, I believe that I have covered each of them. I
> even replaced the taper bearings with the two from the other wheel
All good points Peter, I believe that I have covered each of them. I
even replaced the taper bearings with the two from the other wheel. I
separated the wheel halves and re assembled them. Looks good as far as
I can tell. I will re inspect the races to verify they are seated.
If all else fails I'll
if the wheel is cast alum. then the problem should be confined to the bearings.
Are the races seated in the halves? Is there uneven wear in the taper bearings?
Are the wheel halves touching all the way around when torqued? Peter
> Wheel Wobble
I have searched through our archives and found pieces on Nose wheel
wobble but do not see anything on a main wheel wobble. When I
purchased this project I knew that one of the main wheels wobbled a
bit but didn't give it thought. I just recently flipped the mains
a
I have searched through our archives and found pieces on Nose wheel
wobble but do not see anything on a main wheel wobble. When I
purchased this project I knew that one of the main wheels wobbled a
bit but didn't give it thought. I just recently flipped the mains
around to the front of the spar for
5 matches
Mail list logo
