KR> Several Questions:

2015-09-23 Thread Flesner
> > > >anyone have experience with installing cabin heaters using a shroud >around the exhaust pipes? > >Trevor Norman > >_+++ My carb heat is nearly identical to Mark's and is pretty much an industry standard. Some designs c

KR> Several Questions:

2015-09-23 Thread Mark Langford
T. W. Norman wrote: > > > Tomorrow we are going to break ground on some of the projects I > have before I start putting everything together. My thrust line is 2.5" below the tops of the longerons, and the plane behaves normally with changes in throttle setting. See http://www.n56ml.com/corvai

KR> Several Questions: Running wire in finished wing.

2015-09-23 Thread Chris Prata
Agree, clever! > Date: Wed, 23 Sep 2015 08:02:04 -0500 > To: krnet at list.krnet.org > Subject: Re: KR> Several Questions: Running wire in finished wing. > From: krnet at list.krnet.org > CC: ppaulvsk at aol.com > > What is an excellent idea. Make sure you don'

KR> Several Questions:

2015-09-23 Thread Robert7721
o has info on Panels, lighting, wiring, etc. http://www.aircraftspruce.com/menus/bv/books_bingelis.html My strobe on top does not have any reinforcement added. Happy building! Rob Schmitt N1852Z www.robert7721.com Sent: Tue, Sep 22, 2015 10:18 pm Subject: KR> Several Questions:

KR> Several Questions:

2015-09-23 Thread danrh at windstream.net
I have made many using 6061 T6 .065 I have them water jet cut and they come out perfect every time. I may even have one laying around somewhere that you can use. Original message From: "T. W. Norman via KRnet" Lastly, anyone have suggestions on how to make the panel? I'm thi

KR> Several Questions:

2015-09-23 Thread Paul VISK
at list.krnet.org Cc: Robert7721 , Twnorman at msn.com Subject: Re: KR> Several Questions: Trevor, I've see several posts back to you on using conduit inside. That is probably the best solution. If you do try and do it on an exterior surface, use the bottom - no one will ever see th

KR> Several Questions: Running wire in finished wing.

2015-09-23 Thread Paul VISK
What is an excellent idea. Make sure you don't go though your wing tank if you have one. Paul ViskBelleville Il618-406-4705 Original message From: Mark Jones via KRnet Date: 9/23/2015 7:17 AM (GMT-06:00) To: KRnet Cc: Mark Jones Subject: Re: KR> Several Q

KR> Several Questions: Running wire in finished wing.

2015-09-23 Thread Mark Jones
-Original Message- From: T. W. Norman >I am going to be cutting a thin line in the wing so I can lay electrical >cable to the position lights and strobes at the tips of the wings. Treavor, There is no need to cut the wing to lay the wire. Go and get a piece of 1/2" EMT conduit that is 10

KR> Several Questions:

2015-09-23 Thread Mike Sylvester
015 05:24:21 -0400 > Subject: Re: KR> Several Questions: > From: krnet at list.krnet.org > CC: danrh at windstream.net > > There are ways to go thru the ribs and not cut any of the wing. > > > > See N64KR at <http://krbuilder.org/> http://KRBuilder.org - The

KR> Several Questions:

2015-09-23 Thread Paul VISK
thing is stiff and ?light.? Paul ViskBelleville Il618-406-4705 Original message From: "T. W. Norman via KRnet" Date: 9/22/2015 10:17 PM (GMT-06:00) To: krnet at list.krnet.org Cc: "T. W. Norman" Subject: KR> Several Questions:. Lastly, anyone have sug

KR> Several Questions:

2015-09-23 Thread Dan Heath
There are ways to go thru the ribs and not cut any of the wing. See N64KR at http://KRBuilder.org - Then click on the pics 2015 KR Gathering - McMinnville, OR. September 3 - 6 -- See U There. Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR

KR> Several Questions:

2015-09-22 Thread T. W. Norman
So, I'm finally getting started on my airplane I bought while I was deployed. I conned a friend to help me by giving him the completed frame of my Super Koala (his father is one of those who wanted a low and slow aircraft). Tomorrow we are going to break ground on some of the projects I have befo