> Sent: Sunday, March 24, 2019 at 7:57 PM
> From: "Pete Klapp via KRnet"
> To: KRnet
> Cc: "Pete Klapp"
> Subject: Re: KR> RPM source for use with Dynon Skyview
>
> Thanks Joe I’ll chew on this info before doing anything
>
> Sent from my iPhone
t: Sunday, March 24, 2019 at 7:57 PM
> From: "Pete Klapp via KRnet"
> To: KRnet
> Cc: "Pete Klapp"
> Subject: Re: KR> RPM source for use with Dynon Skyview
>
> Thanks Joe I’ll chew on this info before doing anything
>
> Sent from my iPhone
>
t;
>
> - Original Message -
> From: "KRnet"
> To: "KRnet"
> Cc: "Jeff Scott"
> Sent: Sunday, March 24, 2019 10:11:25 AM
> Subject: Re: KR> RPM source for use with Dynon Skyview
>
> It occurred to me last night while I was w
Jeff
Thanks for the info. That’s a good idea and starting point
Sent from my iPhone
> On Mar 22, 2019, at 9:13 PM, Jeff Scott via KRnet
> wrote:
>
>
>> Subject: KR> RPM source for use with Dynon Skyview
>>
>> Netters
>> Need to find out what others ha
#x27;t. So decide fro yourselves the best method.
Joe Horton,
N357CJ
- Original Message -
From: "KRnet"
To: "KRnet"
Cc: "Jeff Scott"
Sent: Sunday, March 24, 2019 10:11:25 AM
Subject: Re: KR> RPM source for use with Dynon Skyview
It occurred to me last ni
On 3/24/2019 9:11 AM, Jeff Scott via KRnet wrote:
I'm surprised about a half a dozen of the scholars here didn't correct me.
-Jeff Scott
++
We were waiting to give you a chance to redeem yourself, NOT
If we
> Sent: Friday, March 22, 2019 at 8:12 PM
> From: "Jeff Scott via KRnet"
> To: krnet@list.krnet.org
> Cc: "Jeff Scott"
> Subject: Re: KR> RPM source for use with Dynon Skyview
>
>
> > Subject: KR> RPM source for use
> Subject: KR> RPM source for use with Dynon Skyview
>
> Netters
> Need to find out what others have used as a rpm source that works with a
> Dynon Skyview. The manual I have dated September 2013 for use with firmware
> version 7 is not very specific. I know that Wi
On Fri, Mar 22, 2019 at 3:42 PM Larry via KRnet
wrote:
>
> On 3/22/2019 2:55 PM, Pete Klapp via KRnet wrote:
> > Need to find out what others have used as a rpm source that works with a
> Dynon Skyview.
>
>
> ++
>
On 3/22/2019 2:55 PM, Pete Klapp via KRnet wrote:
Need to find out what others have used as a rpm source that works with a Dynon
Skyview.
++
WOW A Skyview in a KR !! I'm stuck on round gauges, flip phon
Need to find out what others have used as a rpm source that works with a Dynon
Skyview. be helpful.
Pete Klapp
++
Pete ,
If you don't get an answer I'll stop by and check it out on a friends
RV
Netters
Need to find out what others have used as a rpm source that works with a Dynon
Skyview. The manual I have dated September 2013 for use with firmware version 7
is not very specific. I know that William has suggested a flywheel tooth
counter like the Stewart automotive. Is there any other
12 matches
Mail list logo
