Keep the Smoke inside the wires. If it gets out, OOO,OOO, Virg
On 12/26/2010 7:45 PM, smwood wrote:
>
> Per Larry Flesner's advice, lots of wiring diagrams and notes for each
> instrument, radio and connector. Every end of every wire is documented and
> double checked. Expect first panel
Wiring the instrument panel on my KR-2 is almost done. The panel is a Rand
factory unit with panel and forward deck as one single piece. The panel and
forward deck is screwed in place and
removable as need be for annual condition inspection and possible future
mods. The GPS antenna is mounted
WOW Great Thanks to Jon Finley for the link to AeroElectric Connection...
This is definitely a KEEPER.
Joe. E. Wallace
jwallace...@gmail.com
On Oct 29, 2010, at 5:26 PM, Jon Finley wrote:
>
> All,
>
> I hope everyone is familiar with the AeroElectric Connection and Bob Nuckolls
>
fault that causes an emergency.
[http://www.aeroelectric.com] http://www.aeroelectric.com
Jon Finley
-Original Message-
From: "Larry&Sallie Flesner"
Sent: Friday, October 29, 2010 3:00pm
To: "KRnet"
Subject: Re: KR> Instrument Panel Wiring
At 08:37 AM 10/29/
At 08:37 AM 10/29/2010, you wrote:
>This wire goes from this terminal here to the
>terminal over there. I can do that. Ok, leave enough slack to make a
>bundle for support. Run the next wire along the length of the first wire.
>Next thing I realize, hey I'm wiring the panel.
>Sid Wood
++
I have started wiring on my KR-2 instrument panel. I have had some
experience on this sort of thing, but that was many years ago. Looking at
all the schematics for all the gadgets and switches with wires running every
which way was daunting to say the least. Truth be known, I found other
thi
6 matches
Mail list logo
