ginal Message -
From: "larry flesner"
To: "KRnet"
Sent: 06 December 2003 03:01
Subject: Re: KR> H/S spars strenght
> At 04:52 PM 12/5/03 +1100, you wrote:
> >I have increased my H/Stabilizer spars 12 inches, Some have told me to
> >increase the spar si
>Larry
>Thanks, It's a KR2 with Dan Diehl wing 23 1/3 feet.
>What are the measurement for a KR2S tail ??
>Phil Matheson
Sorry, I don't have 2S plans. I'm sure someone can help you
with that. YO, ANYBODY Hopefully they will also add
.
> >What are the measurement for a KR2S tail ??
> >Phil Matheson
I have built my HS & elevator spars and they are 71 inches long...which are
the dimensions given in the builder's manual. There is an elevator spar
center bracket of 1/4" plywood, but nothing else for the stab spars. In the
>What are the measurement for a KR2S tail ??
Kr2 Vert stab = 40" KR2S = 43"
Horiz stab = 71"=71" (same)
This is per RR plans. Only the vertical stab (rudder) was changed going
from the KR2 to the KR2S. I suspect that this had to do with the longer
fusel
Bernie wrote:
>In the KR2S supplementary drawings there is nothing shown for HS spars
Does this mean that the KR2 and KR2S HS spar dimensions are identical?
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@msn.com
See my KR project at: www.geocities.com/djramccoop1/KR2_Home.html
C-F
hope that will stop your dout feeling
best regards
nasser
>From: larry flesner
>Reply-To: KRnet
>To: KRnet
>Subject: Re: KR> H/S spars strenght
>Date: Fri, 05 Dec 2003 10:01:01 -0600
>
>At 04:52 PM 12/5/03 +1100, you wrote:
> >I have
built-aviation.com
- Original Message -
From: "Dean Cooper"
To: "KRnet"
Sent: 06 December 2003 12:07
Subject: Re: KR> H/S spars strenght
Bernie wrote:
>In the KR2S supplementary drawings there is nothing shown for HS spars
Does this mean that the KR2 and KR2S HS spar
: "larry severson"
To: "KRnet"
Sent: 06 December 2003 11:39
Subject: Re: KR> H/S spars strenght
>
> >What are the measurement for a KR2S tail ??
>
> Kr2 Vert stab = 40" KR2S = 43"
> Horiz stab = 71"=
> Can someone please tell me then ,
> What is the wing span listed in the KR2S plans, Please
>
> Phil Matheson
-
Sheet W2 of the KR2S plans shows the wing planform and from that the wing
span from tip to tip (which includes the 20" wing tip extension on each
wing) is 23 ft 5 in.
The span of
Bernie thanks
Phil Matheson
mathe...@dodo.com.au
Australia
61 3 58833588
See our VW Engines and home built Parts
and Kits at:
http://www.vw-engines.com/
www.homebuilt-aviation.com
I have increased my H/Stabilizer spars 12 inches, Some have told me to
increase the spar size and strength, others say here is no need.
Any advise would be welcomed
I have been told spars need to be 20% stronger width or a doubler out One
foot either side???
Phil Matheson
mathe...@dodo.com.au
Aus
Phil wrote:
>I have increased my H/Stabilizer spars 12 inches, Some have told me to
>increase the spar size and strength, others say here is no need.
>Any advise would be welcomed
I would appreciate the advice as well.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@msn.com
See my KR projec
At 04:52 PM 12/5/03 +1100, you wrote:
>I have increased my H/Stabilizer spars 12 inches, Some have told me to
>increase the spar size and strength, others say here is no need.
>Any advise would be welcomed
>Phil Matheson
+++
Phil,
I'm not an eng
13 matches
Mail list logo
