I agree with Larry, or add some thin spruce instead of ply.
BUT
I outer spars on my KR2SS I picked up have ply attached to the outer spar
caps to make the difference, I am till thinking of a better idea
Phil Matheson
--
Rather than add the softer ply under the
Worked for me.
Sent from my HTC One XL on the Telstra 4G network
- Reply message -
From: "Mark Langford"
To: "KRnet"
Subject: KR> Fw: waf
List-Post: krnet@list.krnet.org
Date: Wed, Nov 13, 2013 11:11 AM
See below from Rob Schmitt. I'm fooling around
Correct, I think I put in one that went from the spar from top to bottom and
plus 1 inch longer than the wafs.
> On Nov 12, 2013, at 8:49 PM, PPaulVsk at aol.com wrote:
>
> Just add the plywood under the fittings, Right?
>
> Paul Visk
> Belleville Il
> 618-406-4705
>
>
> In a message dated
Thin spruce is NOT the way to go. Plywood is stronger. 2-3 mm spruce would
be too easy to compress and only slightly better than paper or cardboard
and as equally moisture.absorbent.
Subject: Re: KR> Fw: waf
, or add some thin spruce instead of
I don't know that we really need to shim anything, although shimming out
the center WAFs would be one way to do it. The spars built per plans leave
a .21875" gap, and you still need to accommodate a pair of 1/8" wing attach
fittings, for a total of .25", so we are short .031". So either the C
I was thinking about that Larry. I still haven't put the tapers on the
outboard caps yet or cut out the holes for the spars in the rib templates yet.
I'll do that.
Paul Visk
Belleville Il.
618-406-4705
In a message dated 11/12/2013 8:21:29 P.M. Central Standard Time,
flesner at frontier.c
Just add the plywood under the fittings, Right?
Paul Visk
Belleville Il
618-406-4705
In a message dated 11/12/2013 7:46:11 P.M. Central Standard Time,
pk.smith at bigpond.net.au writes:
Worked for me.
Sent from my HTC One XL on the Telstra 4G network
://list.krnet.org/mailman/listinfo/kr
At 07:49 PM 11/12/2013, you wrote:
>Just add the plywood under the fittings, Right?
>
>Paul Visk
Rather than add the softer ply under the fitting, I'd change the
dimension of either the inner or outer section spar cap to make it
work. As you can see,
See below from Rob Schmitt. I'm fooling around with list settings. If this
makes it, I'll be on to something...
From: Robert7721 at aol.com
To: krnet at list.krnet.org
Sent: Tuesday, November 12, 2013 6:59 PM
Subject: Re: KR> waf
I remember having the same issue. If I recall correctly I jus
9 matches
Mail list logo
