Re: KR> Corvair engine mount for KR2S Drawings wanted

Alex Waiss wrote: > I attached pages from WW Manual 2011. > Check great examples of mount on Mark Langford and Paul Smith project pages. Here's the direct link to my Corvair engine mount site, at http://www.n56ml.com/corvair/mount_fit.html There's a whole lot more on the Corvair engine at http:/

Re: KR> Corvair engine mount for KR2S Drawings wanted

Does anyone have drawings for the mount. Id be happy to make them for the people on the list?? Thanks Stan On 11/24/2019 5:30 PM, Mark Wegmet via KRnet wrote: Yeah I know, most of you guys would say "quit being lazy" and weld up your own, but does anyone have a FWF engine mount for a Corvair

KR> Corvair engine mount for KR2S

Yeah I know, most of you guys would say "quit being lazy" and weld up your own, but does anyone have a FWF engine mount for a Corvair suitable for a KR2S? Just the mount, don't need extras! Thanks! Mark W. N952MW (res) ___ Search the KRnet Archives a

KR> Corvair engine mount

Just completed my corvair mount. Getting it lined up in this photo. -- next part -- A non-text attachment was scrubbed... Name: photo.JPG Type: image/jpeg Size: 118076 bytes Desc: not available URL:

KR> Corvair Engine mount

l - MVN Daniel R. Heath - Lexington, SC -Original Message- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Mark Langford via KRnet Sent: Wednesday, July 09, 2014 7:31 PM To: KRnet Subject: Re: KR> Corvair Engine mount Larry Elwood wrote: > What is the b

KR> Corvair Engine mount

Larry Elwood wrote: > What is the best way to mount the WW KR2 corvair engine mount to the > firewall of a stock build KR2? I used bolts! I'm not sure what you mean exactly, but the KR2 and KR2S firewalls are both 22" tall, but the S is almost 2" wider. That may be your issue, since the proto

KR>Corvair engine mount

Mark L. wrote- >The tube is 6.5" away from the firewall on mine >It's also right at 6.5" above the bottom of the firewall, when the plane is >level. But didn't you end up with two small 'kickers' below the bottom edge of your firewall where the mount intersects? I guess if Rich is custom-fabri

KR>Corvair engine mount

OZ wrote: > But didn't you end up with two small 'kickers' below the bottom edge of your > firewall where the mount intersects? I guess if Rich is custom-fabricating > his mount to fit his firewall and mounting points, he won't end up with the > small kickers, but was it your intention from the b

KR>Corvair engine mount

Well I ended up making a jig out of MDF that clamped on the front of my firewall, that way I could set everything up close to the dimensions that were provided by some of you. I chose to make the rectangular frame a little wider that way I can put on "tabs" (ala Dave Mullins) that can be moved

KR>Corvair Engine Mount

Can any of you corvair guys tell me the distance from the firewall to the rear of the the square frame section part of the engine mount and how high it is mounted from the bottom of the firewall? I havent got bushings yet to align the engine on the thrust line and get the correct distance down

KR>Corvair Engine Mount

Rich Parker wrote: > Can any of you corvair guys tell me the distance from the firewall to the > rear of the the square frame section part of the engine mount and how high > it is mounted from the bottom of the firewall? The tube is 6.5" away from the firewall on mine, as shown at http://home.hiw

KR>Corvair Engine Mount

r 02, 2003 4:27 AM Subject: KR>Corvair Engine Mount > > Can any of you corvair guys tell me the distance from the firewall to the > rear of the the square frame section part of the engine mount and how high > it is mounted from the bottom of the firewall? > > I havent got bushings