i agree with the use of a small oil pump forcing the brake fluid in from the
bottom. I tried using gravity to bleed my clevelands from the top and never
could get them to work. used a small oil pump and bled them from the bottom
with no problem...robert
On Tuesday, October 18, 2016 1:42 PM
?i agree with the use of a small oil pump ??forcing the brake fluid in from
thebottom.
I ended up using a 60 ml serenge and 10 inches of 1/8 inch ID clear tubing. ?I
sucked the brake fluid out of the bottle. The tubing fit onto the serenge and
to the brake bleed fitting. ?Opened the bleed
?
?
> I have Cleveland wheels and calipers with Suzuki GSXR 750 brake cylinders.
> The brake cylinders are a custom heal brake configuration mounted
> horizontally.
Are the brake cylinders fed fluid by a remote reservoir that's mounted
higher than the cylinders, or are the reservoirs built in
Joe,
There is precious little information in your post as to what brake components
you have or how they are configured, so I'll try to cover the high points of
brake problems.
Assuming your master cylinders are mounted vertically for use in toe brakes,
brake bleeding is typically done by havin
what kind of brakes do you have???
On Monday, October 17, 2016 10:20 PM, bjoenunley via KRnet wrote:
? ?
Dear krnet,
My left master cylinder won't work.
I purchased the bleed kit from Harbor Freight and it works great on the right
brake. ?The left it won't.
I pulled the brakes out of th
?What brake components do you have?
I have cleavland wheels and calipers with Suzuki GSXR 750 brake cylinders. ?The
brake cylinders are a custom heal brake configuration mounted horizontally. ?i
made it myself!?
I installed the 1/8 inch brake lines that Dan used in his blackbird and
recommende
Joe Nunley wrote:
> I have Cleveland wheels and calipers with Suzuki GSXR 750 brake cylinders.
> The brake cylinders are a custom heal brake configuration mounted
> horizontally.
Are the brake cylinders fed fluid by a remote reservoir that's mounted
higher than the cylinders, or are the reserv
Dear krnet,
My left master cylinder won't work.
I purchased the bleed kit from Harbor Freight and it works great on the right
brake. ?The left it won't.
I pulled the brakes out of the airplane to test each part independently and
found no fault.
I set up the brake system outside the airplane and
8 matches
Mail list logo
