?i agree with the use of a small oil pump ??forcing the brake fluid in from
the????bottom.
I ended up using a 60 ml serenge and 10 inches of 1/8 inch ID clear tubing. ?I
sucked the brake fluid out of the bottle. The tubing fit onto the serenge and
to the brake bleed fitting. ?Opened the bleed screw and slowly fed the fluid
into the system until the reservoir showed fluid, pumped the brake, then
continued until the reservoir was full.
I found that my brake cylinders only work in one direction. ?In other words
there is an upside and a wrong side. ?It is a good thing I found that out
because if I flew inverted then my brakes wouldn't have worked!
Joe Nunley?CW2 US Army RetiredBaker JROTC Instructor?Baker Florida?
