question.
>
> Take care,
> L.G.
> -Original Message-
> From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf
> Of Brian Coss
> Sent: Thursday, October 13, 2011 9:41 AM
> To: KRnet
> Subject: Re: KR> AeroPoxy and Micro Mixture
>
> I h
KRnet
Subject: Re: KR> AeroPoxy and Micro Mixture
I have a second layer of glass over the leading edge, and about 4 inches
past the main spar, and the wing tip has glass about 1 foot in word, over
the original dynel, can I put 3 quarter ounce glass, over the remaining
exposed dynel?
On Oct 13, 2
, 2011 9:35 AM
To: KRnet
Subject: Re: KR> AeroPoxy and Micro Mixture
> In laymans terms, if I was using one measured cup of resins, what would be
> a good ratio for the hardener? in cup terms, 4 instance a little over a
> quarter cup?
> On Oct 11, 2011 7:31 AM, "Brian Coss"
I have a second layer of glass over the leading edge, and about 4 inches
past the main spar, and the wing tip has glass about 1 foot in word, over
the original dynel, can I put 3 quarter ounce glass, over the remaining
exposed dynel?
On Oct 13, 2011 9:35 AM, "Brian Coss" wrote:
> of aero epoxie b
of aero epoxie by the way,
On Oct 13, 2011 9:34 AM, "Brian Coss" wrote:
> In laymans terms, if I was using one measured cup of resins, what would be
> a good ratio for the hardener? in cup terms, 4 instance a little over a
> quarter cup?
> On Oct 11, 2011 7:31 AM, "Brian Coss" wrote:
>
>> Sorry,
In laymans terms, if I was using one measured cup of resins, what would be a
good ratio for the hardener? in cup terms, 4 instance a little over a
quarter cup?
On Oct 11, 2011 7:31 AM, "Brian Coss" wrote:
> Sorry,still learnin how to use a web site, I layd up the wings,is the
> racial the same fo
The ratio of Resin to Hardener for AeroPoxy is 1 part Resin to .27 part
hardener and this is by weight, which I forgot to mention before.
The ratio is the same no matter what you are using it for, Micro, Flox,
Fiberglass, Carbon Fiber. It has to be the same.
Put your cup on the scale and set it
Sorry,still learnin how to use a web site, I layd up the wings,is the racial
the same for over the fiberglass? Thx
On Oct 11, 2011 7:19 AM, wrote:
> First, you need to remember to change the subject when you are changing the
> subject. Your question had nothing to do with "Wingspan". I almost d
First, you need to remember to change the subject when you are changing the
subject. Your question had nothing to do with "Wingspan". I almost deleted it
because I have read enough about wingspan.
The ratio for mixing AeroPoxy is 1 resin to .27 hardener. For sealing the foam
with the Micro m
9 matches
Mail list logo
