I have a second layer of glass over the leading edge, and about 4 inches past the main spar, and the wing tip has glass about 1 foot in word, over the original dynel, can I put 3 quarter ounce glass, over the remaining exposed dynel? On Oct 13, 2011 9:35 AM, "Brian Coss" <briancossdul...@gmail.com> wrote:
> of aero epoxie by the way, > On Oct 13, 2011 9:34 AM, "Brian Coss" <briancossdul...@gmail.com> wrote: > >> In laymans terms, if I was using one measured cup of resins, what would be >> a good ratio for the hardener? in cup terms, 4 instance a little over a >> quarter cup? >> On Oct 11, 2011 7:31 AM, "Brian Coss" <briancossdul...@gmail.com> wrote: >> >>> Sorry,still learnin how to use a web site, I layd up the wings,is the >>> racial the same for over the fiberglass? Thx >>> On Oct 11, 2011 7:19 AM, <da...@windstream.net> wrote: >>> >>>> First, you need to remember to change the subject when you are changing >>>> the subject. Your question had nothing to do with "Wingspan". I almost >>>> deleted it because I have read enough about wingspan. >>>> >>>> The ratio for mixing AeroPoxy is 1 resin to .27 hardener. For sealing >>>> the foam with the Micro mixture, put in enough Micro to have it pour about >>>> like honey. If you get it too thick, it will start rolling up the foam if >>>> you get that, just put in a little more epoxy and keep on going. >>>> >>>> ============= >>>> Hi,i have a gal. Of aeropoxy& a quart of hardner&two pounds of micro >>>> ballons, I have to finish my wings, what is the ratial for mixing them? >>>> >>>> >>>> >>>> _______________________________________ >>>> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >>>> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >>>> please see other KRnet info at http://www.krnet.org/info.html >>>> >>>
