KR> cutting airfoil section tapers

comments please.. to cut the as5046 section tapers on the top and bottom spar caps( all, including elevator spars) i have cut wedges to the required angles intend to block up on a cutting board and then run through the saw blade as if cutting a normal taper cept the spar is clamped to the dif

KR> tapering spars/was HS Update

>angle crank at the pre-determined pace. Look at the 7th picture down from >the top .straightforward and really works well. > >Oscar ZunigaSan Antonio, TX >.i am in the process of tapering the spars for > the as5046 section as well . what i have done is by use

KR> t88

hi... the weight ratio for t88 is 100 part A --- 83 part B( hardener) info can be checked in the wicks cat.

KR> tapering spars/was HS Update

>angle crank at the pre-determined pace. Look at the 7th picture down from >the top .straightforward and really works well. > > >.i am in the process of tapering the spars for > the as5046 section as well . what i have done is by useing a protractor > cut all

KR> Re: KR2s plans

> > any one in australia with a set of kr2s plans ? need to shot the breeze > on some wing length numbers plz. email me off net thanks. > >___ >to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >please see other KRnet info at http://www.krn