What about changes to the inst panel that would "enhance the safety of
flight" say adding a x-ponder, a radio or nav upgrade, or a engine
information system. Lets say you go from a "panel mount" 396 to a 496. Or
hook your lap top (moving map display) to a panel mount gps. Do any or all
of the
Dave, I added 14 inches to the length of mine by cutting the boat about 2
ft in front of the tail section half way between a couple of upright
members. All cuts, plywood and logerons were cut on a 1-12 ratio. I added an
extra logeron under the top logerons "about 28 inches long" and above the
12"x12" only gives a 1" over lap all the way around a 10"x10" patch
What I do in a case like this is cut peel ply , lay it on a non stick
surface plastic ect then wet it out , apply a layer of glass wet it out then
another layer of glass ect.. then pick up peel ply, glass and epoxy in one
piece
If doing a wing just make sure not to get micro on the wood spars. This
should be pure epoxy for a strong bond.
Mike Turner
Jackson Missouri
- Original Message -
From: "Larry&Sallie Flesner"
To: "KRnet"
Sent: Wednesday, January 17, 2007 4:55 PM
Subject: Re: KR> glassing 2 question
>
4 matches
Mail list logo
