How is Jack Cooper I haven’t anything about for a long time. Is he still alive?
Thank you, Jim Morehead
>
>
> ___
> Search the KRnet Archives at
> https://www.mail-archive.com/krnet@list.krnet..org/.
> Please see LIST RULES
What is the date of this years kr gathering and where will it be held?
Thanks,
Jim Morehead
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org
I have tried to contact Dave Goodman, but since he sued me and collected, I
have not been able to contact him. I would like to contact him to see how he is
doing.
Jim Morehead
On Wednesday, February 15, 2017 12:05 PM, laser147--- via KRnet
wrote:
Send a note to Jim Morehead
Netters,
I'm looking for Steve Glover's e-mail address and his snail mail to his
business address.?
Thanks for your help.
Jim Morehead?
Dan,
?What does the registration?of $25.00 cover??? I don't ever remember seeing it
listed befor.
Jim MoreheadN522pc? is for sale!
On Thursday, July 30, 2015 9:45 AM, Dan Prichard via KRnet wrote:
>
> All,
>?
> The shirt will be a tan color with a pocket.? To quote my daughter ?so yo
Netters,
What is the date for the McMinnville KR Gathering, I need to get it on my
calendar. What is the name of the host, and how do I get in contact with him?
Hope to see all on you there,
Jim Morehead
Cameron Park, CA
N522pc for sale
Netters
I just check checked the "preregistration page and there are 90 people listed.
What a great time you are going to have The rest of us that are unable to be
there will be waiting for updates from you.
This year I talked my wife into going to the Gathering with me, we were going
to driv
Dan and Netters,
I marked my wires using the computer to make labels one for each end of the
wire. I chose
a font size that would fit the wire. Then I slipped the label under short
piece of clear shrink tubing and used the heat gun to hold it in place.
Jim Morehead
Cameron Park, CA
N522PC
I get my Spruce order I will get on it.
David Goodman's E-mail with the pictures of my KR gives you a good look ot the
bent nose gear.
Be safe everone,
Jim Morehead
N522PC (will fly again!)
--- On Tue, 10/12/10, David Goodman wrote:
From: David Goodman
Subject: RE: KR> k
Netters,
Is ayone going to post on the KR Grathering web page directions from LEX
Airport to the Country Inn and Suites?
Jim Morehead
N522PC
r solution?
Thanks
Jim Morehead
N522PC
Larry,
I booked a toom today and got the same story got the same story
Jim Morehead
--- On Thu, 8/5/10, Larry&Sallie Flesner wrote:
From: Larry&Sallie Flesner
Subject: Re: KR> KR Gathering Rooms
To: "KRnet"
List-Post: krnet@list.krnet.org
Date: Thursday, August 5,
g tip onto a foam pad and
remove lower bolts and lower that end onto a foam pad.
The hard part is picking up the wing and placing it on your wing rack.
And by the way, be sure to disconnect the aileron linkage.
Jim Morehead
N522PC
Joe Walburne wrote:
> If someone has and EASY way &g
Good Morning all,
Check out the following for tires. If you need to replace your "747" tires,
they have them too.
Jim Morehead
N522PC
69
test
Jim Morehead
David Goodman is the man you are looking for. His web sight is
http://www.verticalavionics.com/ And his phone number is:phone number is
1 (360) 678-1602 He lives in Couperville, WA
Jim Morehead
N522PC ( flying KR-2)
--- On Sat, 9/12/09, rdrace...@aol.com wrote:
From: rdrace...@aol.com
Dave,
Please e-mail me off the net.
Jim Morehead
N522PC
igned to do the first 40 hours at Rancho Murieta Airport (N61).
If you are willing and able to help me, I will give you a round trip airline
ticket to Sacramento, CA airport. and cover your costs. I don't expect you to
do this for me for free.
Thanks,
Jim Morehead
Cameron Park, CA
N
Mark,
Check out the following web site on Metal Spinning.
http://www.toledometalspinning.com
Jim Morehead
Cameron Park, CA
Netters,
Those of you that have used ³spatter paint² on the inside of your
fuselage. Where did you find it? I have found ³spatter paint,² also called
³trunk paint² at an auto parts store but it is vary dark paint. I¹m
looking for a light gray spatter paint.
Thanks,
Jim Morehead
Cameron
e but it is vary dark paint. I¹m
>> looking for a light gray spatter paint.
>> Jim Morehead
> ++
>
> Jim,
>
> I bought mine at Wal-Mart. Make sure to follow the instructions for
> best results. I used t
board shut me
down, something about liability insurance, even though I had written
permission from their parents.
Anytime you get a chance to visit a tower you should do it.
Happy New Year to all,
Jim Morehead
Cameron Park, CA
Netters,
I need to mount my sealed 15 amp battery onto my firewall. Does anyone
have a picture on their web sight that shows what you have done? I¹m open
for all suggestions.
Jim Morehead
Cameron Park, CA
I ran the engine yesterday. Now I also have a high dollar leaf blower!!
n the floor?
Jim Morehead
Cameron park, CA
Wiring up the panel
on 10/11/05 7:12 PM, w.higdon9...@comcast.net at w.higdon9...@comcast.net
wrote:
> Mark,
> If your feet aren't in place to stop the pedal it could go so that one hits
> the firewall and one the floor. And Luscombs have
Netters,
I have a 1997 Ford F150 pick up, it got a factory recall due to intake
icing. Since I live in California they told me to keep the notice in the
glove box and if I ever moved to a cold state I should bring it in for the
"fix."
Jim Morehead
Cameron Park, CA
Netters,
Can a KR2 be painted with one gallon of paint or should I order two
gallons?
Jim Morehead
Cameron Park, CA
Getting closer!
Netters,
Just try to buy an American made Car. They are just assembled in the
USA. Half of the bolts are metric.
Jim Morehead
Cameron Park, CA
Punching holes in the Instrument pannel.
on 5/13/05 6:03 PM, Dennis Mingear at dennisming...@yahoo.com wrote:
> I've read that all
contact
with him.
Thanks,
Jim Morehead
Cameron Park, CA
Working on the panel.
Phillip,
Maybe the reason we use MPH instead of Knots, is that if makes it sound
like our KRs are going faster!!!
Jim Morehead
Cameron Park, CA
on 5/12/05 4:39 PM, Phillip Matheson at mathe...@dodo.com.au wrote:
> I have asked this before, and still not sure as to why in the US you
Netters,
If you are interested in LED position lights, check out this web sight.
http://www.killacycle.com/Lights.htm
Jim Morehead
Cameron Park, CA
Just reserved a room for the Gathering. Hope to see everyone there.
thicker that 1/4²?
Should it be wrapped with a layer carbon fiber ?
Thanks,
Jim Morehead
Cameron Park, CA
tiful plane and a fellow pilot.
Jim Morehead
Cameron Park, CA
on 2/9/05 5:51 AM, Randy Smith at cruiseair74...@charter.net wrote:
>
> - Original Message -
> From: Ken Calman
> To: friendlysk...@yahoogroups.com
> Sent: Tuesday, February 08, 2005 9:02 AM
> Subject: [frie
inside.
Slid the fairing back into place and glassed it to the wing only. It fits
tight to the gear leg but is not glassed to the leg. If and when the leg
flexes it is free to flex and hopefully will not break anything.
Jim Morehead
Cameron Park, CA
Working on instrument panel and canopy
on 1/11
sure those that have been through this step will have some very helpful
ideas.
Also looking for a ³night latch² type safety catch that will keep the
canopy from blowing clear open if it ever gets loose.
Hope everyone has a great upcoming three day weekend.
Thank you,
Jim Morehead
Cameron
Dan,
Good to hear from you again. I have a couple of questions on your
replys.
1. First give yourself only as much canopy edge as you need to secure it and
then put on your fiberglass tapes as neatly as possible, using the plastic
backing method. Then after that cures, take off the vinyl tape
the wax and PVA, what do you
use to remove all the wax before painting?
Jim Morehead
Cameron Park, CA
Working on the canopy and the instrument panel.
Dene,
You can braze or silver solder a length of drill rod to the end of a
regular drill bit. Just dress the sides down to the 3/16" size so it will
not bind in the hole.
Jim Morehead
Cameron Park, CA
Working on the insturment pannel
on 10/5/04 1:22 PM, Dene Collett (SA) at dene
e everyone
there.
Jim Morehead
Cameron Park, CA
on 9/19/04 5:09 PM, Dan Heath at da...@alltel.net wrote:
> I think it must have been for the mentally impaired. They held the dog up at
> the table on their lap, while they ate and they were at a full table. I don
> t know who those other
?
Jim Morehead
Cameron Park,CA
kr...@d-web.com
same number. I
got no response. I finally dug out my receipt for the plans and found that
my receipt was for 7561. I sent a photo copy of my receipt and a copy of
my plan book page asking if I should just change the number in my plan book.
I have still never heard from Her.
Jim Morehead
Cameron
Bleeding,
Cissing, Clouding, Orange Peel, etc. Click on the pictures and read
Descriptions of each along with 1. Cause 2 Prevention and 3. Rectification.
Jim Morehead
Cameron Park, CA
Netters;
I also would be interested in attending a gathering on the West Coast.
Jim Morehead,
Cameron Park, CA
on 7/22/04 8:03 PM, John Esch at jfe...@earthlink.net wrote:
> All
> How many west coasters on the KR list?
> Curious what the interest would be for a West Coast gatheri
Joe,
What size valve do you have on your header tank and what size fuel line
do you have running through the gascolator and to the Carb?
Thanks,
Jim Morehead
Cameron Park, CA
on 7/18/04 12:05 PM, Joseph H. Horton at joe.kr2s.buil...@juno.com wrote:
> Guys
> I just finished d
Mark,
Who did you order your seatbelts from?
Jim Morehead
Cameron Park, CA
on 6/24/04 5:56 PM, Mark Langford at n5...@hiwaay.net wrote:
I also ordered my seatbelts yesterday...
>
> Mark Langford, Huntsville, Alabama
> N56ML "at" hiwaay.net
> see KR2S project at
of 6061-T6
Alum? If so what thickness angle alum. would be best. I was thinking of
using of using 1/8² or 1/4² thick 2 X 3 inch angle. Bolted on with either
AN3 or AN4 bolts with an alum. backing plate I welcome all comments.
Thanks,
Jim Morehead
Cameron Park, CA
Steve,
Try
Jim Morehead
Cameron Park, CA
on 4/29/04 10:19 AM, Stephen Jacobs at ask...@microlink.zm wrote:
>
> The email Address provided on his web page does not work - does anyone
> have a current address for Dan
>
> I have been trying d...@cuttingedge-tech.
flox and
filled it in. When cured. sand it down. It makes a clean edge.
Jim Morehead
Cameron Park, CA
on 5/2/04 1:06 PM, raybeth...@wmconnect.com at raybeth...@wmconnect.com
wrote:
> I say up front that I have not checked the RR handbook lately. I will
> be putting the Firewall together
Larry and Netters,
Are you using straight isopropyl alcohol or rubbing alcohol which is 91%
alcohol and 9 % water?
Jim Morehead
Cameron Park, CA
Just made reservations for Mt. Vernon, IL. See you there.
on 3/12/04 3:48 PM, larry severson at lar...@socal.rr.com wrote:
> A couple months
Netters,
What battery is recommended for a Revmaster 2100 D engine? What ³cold
Cranking Amperage² is recommended?
Thanks,
Jim Morehead
Cameron Park, CA
coat.
I have two coats of Smooth Prime on the wings and tail feathers.
Any help is appreciated.
Jim Morehead
Cameron Park, CA
Cowl is ready to paint.
Sign me up for a KR Calender.
Jim Morehead
kr...@d-web.com
bottom side?
Sure would hate to end up with a one piece cowl.
I¹m open for suggestions.
Thanks,
Jim Morehead
Cameron Park, CA
kr...@d-web.com
Hope everyone had a great Thanksgiving
Larry,
I received the same anti-spam query and I deleted it. Does anyone know
where this is coming from?
Jim Morehead
Cameron Park, CA
Jim Morehead
on 11/29/03 6:48 PM, larry severson at lar...@socal.rr.com wrote:
> I am getting a anti-spam query from brui...@attg.net re my message
Steve,
Congratulations, glad to hear that your KR2 is up and flying. We need
to have everyone that completes their KR's to send a picture and a short
note to Kit Plane Magazine to be published in the ³Completions² section. To
show the world what a great plane the KR is.
Jim Morehead
Ca
nably priced although for 4 quarts of oil, who cares what it
> costs
>
> Jim
>
> Jim Faughn
> 4323D Laclede Ave.
> St. Louis, MO 63108
> (314)652-7659
> Email - sub @ for "at" jfaughn "at" socket.net
> Web Site http://jfaughn.com
>
Jim,
What weight oil are you using?
Jim Morehead
Cameron Park, CA
? If so what
size screw and how far apart.
Thanks,
Jim Morehead
Cameron Park, CA
kr...@d-web.com
My Revmaster cowl didn¹t have room for the oil cooler below the engine. I
glued foam on the bottom of the cowl then used it to used it to pull a
female mold off of it. Then laid up a newly shaped cowl
What also works to get a cowling mold apart is a "slim jim" sold at auto
parts stores to unlock your car door when your key is inside.
Jim Morehead
Cameron Park, CA
on 10/16/03 7:42 AM, Mark Langford at n5...@hiwaay.net wrote:
> Excellent post by Steve! Two things I would
Mark and Netters,
A lot has been said about your paint color selection. Did you paint
the bottom of your airplane using your new $50.00 43430 HVLP paint gun from
Harbor Freight?
Jim Morehead
Cameron Park, CA
>
> I should mention that I'm not an expert on paint eitherI ju
Netteers,
Here is thre information on Kenny Faeth.
Faeth Aircraft Parts
5954 Bradshaw Rd.
Sacramento, CA 95829
Phone (916) 368-1832
FAX (916) 364-8036
Jim Morehead
Cameron Park, CA
on 9/5/03 4:17 PM, ronev...@aol.com at ronev...@aol.com wrote:
> Netters;
> For a heated pitot tu
netscape.com/n886mj/homepage.html
>
> ___
> see KRnet list details at http://www.krnet.org/instructions.html
Netters
I will be at the Gathering, I had to get my "Jury Duty" postponed.
Will bring Construction Pictures.
Jim Morehead
Cameron Park, CA
Netters,
I¹m ready to apply the Fiberfrax and the stainless steel to the
firewall. Do you glue both around the edge with resin or is there something
better? Do you cover the exposed edges with micro and resin?
Jim Morehead
Cameron Park, CA
Netters,
Where is a good source to buy a spinner for a stock KR2 with a
Revmaster 2100? What are the pros and cons of Aluminum verses fiberglass
spinners? Do you need to have the prop to order the correct spinner?
Jim Morehead
Cameron Park, CA
kr...@dweb.com
First coat of Smooth Prime
Months ago. Still no response. I would to like get this taken care of
before I try to register my project. Any suggestions?
Jim Morehead
Cameron Park, CA
Wings ready to be primed
See you in Red Oak.
on 7/31/03 6:33 AM, Jack Cooper at kr2coo...@earthlink.net wrote:
> I bought a used set of pl
Netters,
Where is a good source to buy a replacement canopy for a stock KR-2? I
looked in Aircraft Spruce and Wicks, they list a lot of KR material, but not
the canopy. Does Jeanette Rand still cary the canopy? I have written to
her twice and have not gotten a reply from her.
Jim Morehead
Netters,
What kind of tie down attach fittings are you all using using on the wings?
I have been trying to come up with a flush pull down or swing out ring to
attach a tie down rope.
Thanks,
Jim Morehead
Cameron Park, CA
Cut out the Ailerons, glassed in the aileron spars and attached aileron
; of time.
>
>
> Happy building...
>
> Larry Flesner
>
Larry,
Thanks for your Smooth Prime information. Why do you only use
"cross-linker" in the first three coats of primer? How many total coats of
primer do you recommend?
Thanks,
Jim Morehead
Cameron Park, CA
KR2, finish sanding the wings
if there is
enough interest. Let me know your thoughts. We want to promote the KR
Airplane on the West Coast. Come and support our great little airplane.
Golden West¹s Web sight is <http://www.goldenwestflyin.org>
Any Questions? Contact
Jim Morehead
Cameron Park, CA
Sanding on the
? Wouldn¹t it be less chance of damage when attaching and removing
the outboard wing?
Thanks,
Jim Morehead
Cameron Park, CA
kr...@d-web.com
Sanding, Sanding and Sanding, but it is looking better every day.
68 matches
Mail list logo
