Be careful...the cg range may not be the same for a kr2s as a kr2. It is
based on percentage of Mean aerodynamic chord and that changes with wing
planform and the planform is different for the kr2s. If you have the
extensions the range will probably be smaller than 8" to 16". I have
started run
Reminder, weekend flying opportunity in Kansas this coming Saturday.
In a message dated 8/4/2013 8:49:47 P.M. Central Daylight Time,
Robert7721 at aol.com writes:
Terry Chezik will be having his annual Fish Fry/BBQ on Saturday Aug 17th
at Marion Airport. Start time is approx 5-6 pm for the
Alan,
I've got link to a spreadsheet on my web site for the C.G. Range. However I
do have a KR2S so yours might be slightly different.
http://www.robert7721.com/WeighIn.html
Basically C.G Range is 8 - 16" of the wing cord. For my plane I used the
firewall as the 0 point. Therefore the wing C
Joe,
If you've got the standard Dan Deihl gear legs, you don't need to worry.
They are mounted flush with the rear main spar. Just make sure when you
install your nose gear that the aircraft is level, not nose down. That might
cause some adverse takeoff behavior.
Photo on web site at
htt
that's ok ,I will have parts youll need like grove brakes ,wheels and
other such stuff . it will be no the net soon
thanks
mike
On Thu, Aug 15, 2013 at 9:14 PM, Adam Tippin wrote:
> Thanks for the offer. But I'm really interested in ground up build.
> On Aug 15, 2013 9:13 PM, "Adam Tippin" w
Thanks for the offer. But I'm really interested in ground up build.
On Aug 15, 2013 9:13 PM, "Adam Tippin" wrote:
> Its from wicks.
> On Aug 15, 2013 8:54 PM, "Richard Kaczmarek" <
> fastlittleairplanes at gmail.com> wrote:
>
>> Who gave you the price? Wick's aircraft supply has the wood kit list
Its from wicks.
On Aug 15, 2013 8:54 PM, "Richard Kaczmarek"
wrote:
> Who gave you the price? Wick's aircraft supply has the wood kit listed in
> their catalog that should give you a good comparison.
>
> Richard
> KR-2 waiting FAA inspection
> Marysville, OH
> On Aug 15, 2013 8:30 PM, "Adam Tippi
Richard,
are you looking for a project, I am going to sell mine. I haven't listed
it, because I have so much extra stuff I haven't got to organize it yet .
if interested mail me off line. For others who is reading this I will make
it available soon on kr net first.
On Thu, Aug 15, 2013 at 8:30 P
Who gave you the price? Wick's aircraft supply has the wood kit listed in
their catalog that should give you a good comparison.
Richard
KR-2 waiting FAA inspection
Marysville, OH
On Aug 15, 2013 8:30 PM, "Adam Tippin" wrote:
> I received a quote of 2,198 for all the wood for a kr2s. Does this pr
After much unheeded advice, much soul searching and nearly crashing the
airplane, The Move for the 2180 VW is underway. The aluminum spacer blocks
are in place now pushing the engine mount forward by 2-inches. Wheel base
is increased by 1-1/4 inches with a spacer block at the fire wall for the
Does this look fair.
I received a quote of 2,198 for all the wood for a kr2s. Does this price
seem fair?
Welcome, it looks like you are on board. Tell us about yourself,
name, where do you live, are you building, etc..
Larry Flesner
See you ib October.?
Sent from my Samsung Galaxy S?4
Joe,
The main wheels have to be far enough aft so that the tail does not hit the
ground every time some one gets in or out of the airplane. You don't know
what the CG is until the airplane is completed. If the wheels are too far
aft, then will not have enough low speed elevator authority to ro
You may not know what the cg of the basic aircraft is until it is finished,
but you should know the aft cg limit before it is finished. The plans for
the kr2 state it is 35% mac...of course mac will vary for a kr2s or if you
change the planform in any other way.
As long as the wheels are aft of t
Can someone tell me the angle of the main gear legs for a tricycle landing gear
, the swept back angle from the spar? I mounted my gear legs and they seem to
be angled further aft than what I've seen on other KR's.I haven't measured the
distance from the aft side of main spar but I would say 8
17 matches
Mail list logo
