I have a little stick time in a rotary powered aircraft. A Coot amphibian
with a pilon mounted Mazda 12A with electronic ignition, 2:1 reduction with
a 5 blade ground adjustable prop. It slows down to 500rpm and takes off at
about 6800rpm. Very smooth operation but very high fuel consumption. Also
Netters,
Lesson one: I've been trouble shooting a problem I was having
switching out my standard position lights with new LED lamps to cut
my electrical load by 4 amps or more. I installed the tail light and
great, it worked. I replaced the left wing light and nothing. I put
the standard
Boy how fast this year has gone byHappy New Year KR Builders!
John
53 Year Old Mom Looks 33
The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried
http://thirdpartyoffers.juno.com/TGL3141/4effa43626c00fcb1em02duc
Joe,
I used Aeropoxy on my wings, I used the gallon kit if I recall correctly. I
recommend making up the epoxy in small batches as you move along, not a
large pot - it will cook off. Aeropoxy comes with set mix ratio, I used a set
of West System pumps which matched the required ratio. I took
Wa too heavy.. ;-) Good comments on PRSU's though
- Original Message -
From: "Glenn Martin"
On 12/31/2011 12:13 PM, Tim wrote:
> I think that a o-360 is the best engine
BEST? Not in a KR series..
--
Glenn Martin,
KR2 N1333A,
Biloxi, MS
On 12/31/2011 12:13 PM, Tim wrote:
> I think that a o-360 is the best
> engine
BEST? Not in a KR series..
--
Glenn Martin,
KR2 N1333A,
Biloxi, MS
Thought I'd pass this along, from Schu.thoughts on Auto Conversions>>>
CldLk-Tim
I looked at the subaru pretty hard and did a lot of research that I'll try
and summarize for you:
The biggest problem with auto conversions isn't the auto engine itself, it's
everything else. I would bolt t
I built my KR2 wings etc., with Vinylester Resin but I had to do smaller
areas because it set up kind of fast. I used small wax free 4" paper
mixing cups and mixed the resin & hardener as needed for that area I was
glassing at the time. Would of been neat to have a one hour set up time
with Vinyl
This might be old news but I just spotted a KR2 on ebay. I'm not affiliated
with the seller in any way.
http://cgi.ebay.com/ebaymotors/KR2-Hapi-VW-1835cc-60-hp-engine-95-finished-lost-hanger-must-go-VGC-/110799260356?pt=Motors_Aircraft&hash=item19cc268ac4
Rich Parker
Greenfield NH
If ever
>
> Here's the bible for rotary engines.
>
> http://rotaryeng.net/
Could not go without chiming in here. After having been around the rotary
world for a while and building a rotary for aviation use myself, most people in
the rotary word work consider Paul Lamar to be a flake who only "bo
Netters,
Could someone please send me a complete parts listing of the Diehl Nose Gear?
Primarily, I am concerned if there is supposed to be a washer/spacer between
the pivot and wheel yoke, as well as the nut on the pivot itself. With a
compete parts list I can figure out if I might be missin
11 matches
Mail list logo
