Netters
The corvair stuff has been sold. I still have a KR2 sitting on dehl landing
gear (no wheel or brakes) and no engine. The wings are complete. And a KR2S
boat stage with center spars installed and wings spars built for the AS5048
airfoil. If anyone is interest send me an email,make me a re
Hi netters;
I purchased an older KR2 project last October that is in the boat stage with
some completed spars. I recently unwrapped the spars and found that the
front center spar wood is there, but they were never assembled/built. Back
when I started investigating and learning about KR's (about 2
I am not sure how many times we removed Less Palmer's bolts before the plane
was finely left at the airport. We could install the wings in about 20 min and
remove them in about 15 min. The thing to remember is replace the Teflon castle
nuts each time. We had a couple of blocks of Styrofoam that
Glen,
I converted N6242 from conventional plans-built retracts to fixed
tri-gear using Dan Diehl standard mains and nose gear. Gear
installation is per Diehl instructions. Have 11x4.5-5 Lamb (Shin) for
mains and 3.4x3.0-5 on the nose. Engine is a stock Great Plains 2180 VW
with 3/4-inch spacers
I have some. E-mail. ?
-Original Message-
From: pshows
To: KRnet
Sent: Wed, 1 Apr 2009 9:18 pm
Subject: KR> Wing Attach fittings
I need a set of WAFs for one wing for a 2s, anybody got some?
IHS
PatS
Seminary, MS
___
Search the KRnet Archives at htt
Robert K Pesak wrote:
>I thought all it took was airspeed and money.
>
>
airspeed is negotiable
--
Glenn Martin
Owner
KR2 N1333A
13238 Hudson-Krohn Rd
Biloxi, MS, 39532
rep...@martekmississippi.com
Hi Everyone,
I thought all it took was airspeed and money.
--
Robert K Pesak
rkp...@bellsouth.net
Hi Sid,
I think you got it right, I have been working on my KR2 3 1/2 years now and
with a total investment of about 5,000.00 give or take a couple a hundred. I
should have it ready to fly this summer. and I did a lot of fishing trips in
the bass boat too!. Thats why its taking so long to buil
Sid , you must be scholar,
or is or middle name Einstein??
That was nice to read.
Phil Matheson
SAAA Ch. 20 http://www.saaa20.org/
VH-PKR
Australia
EMAIL: phillipmathe...@bigpond.com
KR Web Page: www.philskr2.50megs.com
---
Search the KRnet Archives
It has taken quite a while for me, not being the sharpest tack in the
box, to figure out what makes airplanes fly. Aerodynamics you say!
No...that may help, but that's not the main reason. Of course:
Horsepower - the more, the better! You can make a barn door fly with
enough horsepower! No...th
10 matches
Mail list logo
