Hi,
> I am looking for a shop to get a development boards preferably a shop that
> sells arm processor / jtag..
> This is my first dig in this space.. any suggestions welcome..
>
> I looked around Ritchie street.. no success..
> Regrards,
> ~ramyak/
Yes it is more expensive in India but 2 optio
On Fri, Jun 27, 2008 at 1:20 PM, benjamin <[EMAIL PROTECTED]> wrote:
> If you are an employer, whom would you hire?
> http://greatjustice.info/university-versus-self-taught/
>
In India-
* Students going to universities choose CS degree because they can have a
better career (of course there will
but I
can't make it work.
did you try root=/dev/sda1 (or the equiv partition in the USB disk?)
also rootdelay=3 (wait for 3 seconds for the kernel to detect the usb disk)
in the kernel parameters?
regards,
Arun
--
Arun Venkataswamy
___
To unsubs
est to test with a Live CD from a internel IDE port
first. Also if you are not going to use SATA, disable SATA completely
in the BIOS setup. I have seen very strange problems when booting from
USB with SATA enabled motherboards
regards,
Arun
Arun Venkataswamy
mouse is connected, the keyboard and touchpad are working in Linux! If I
remove the mouse and boot the system I can't even log on because the
keyboard and touchpad do not work. What could be the issue? Anobody else
with a Dell vostro?
With regards,
Arun Venkata
ot work. I had to use ndiswrapper with XP
drivers.
Regarding shifting to Ubuntu, not possible for me - I use a propriotory
software (LabVIEW) and is supported only on OpenSUSE and a few commercially
supported linux versions.
With regards,
Arun Venkataswamy
On Mon, Sep 1, 2008 at 6:50 PM, Arun Venkataswamy <[EMAIL PROTECTED]> wrote:
>
>
> On Sat, Aug 30, 2008 at 7:35 PM, K.C. Ramakrishna <[EMAIL PROTECTED]
> > wrote:
>
>> Hi,
>>
>> We have 2 Dell Vostro 1510 (bought a few weeks back) running Ubuntu.
>&
taken up by the
government, but requires more thorough insight and good consultation.
regards,
Arun Venkataswamy
___
To unsubscribe, email [EMAIL PROTECTED] with
"unsubscribe "
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
back using a
browser...
My point was than a *novice* user might think that without MS Office and XP,
they *cannot* do an e-filing of sales tax return when they see the user
guide.
regards,
Arun Venkataswamy
___
To unsubscribe, email [EMAIL PROT
uld be the problem? When I use OpenSUSE rescue mode, the ide driver
"via_pata" is loaded. Is it possible to load this via_pata module during
boot (before init)?
--
Arun Venkataswamy
___
To unsubscribe, email [EMAIL PROTECTED] with
"unsubsc
t and then chroot to the hard disk. Then ran mkinitrd
and it cleanly included the pata_via module in the initrd image. The system
boots now...
With regards,
Arun Venkataswamy
___
To unsubscribe, email [EMAIL PROTECTED] with
"unsubscribe "
in the subj
ying a compressed tar of 620 MB in a pen drive.
The file system inflates to less than 2GB. I assume dd will copy the entire
40GB or 80GB of hardisk?
With regards,
Arun Venkataswamy
___
To unsubscribe, email [EMAIL PROTECTED] with
"unsu
em in - and we get
contracted to do the project immediately!
What do you guys say? Start a discussion group?
Regards,
Arun Venkataswamy
___
To unsubscribe, email [EMAIL PROTECTED] with
"unsubscribe "
in the subject or body of the
greedy entities whether their base is
Automotive/Software/Pharma. Again, I am only talking about greed and
not ethics.
regards,
Arun Venkataswamy
___
To unsubscribe, email [EMAIL PROTECTED] with
"unsubscribe "
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
On Thu, Dec 25, 2008 at 2:50 PM, abdullah abdul Khadir <
abdullah.ak2...@gmail.com> wrote:
> Hi,
> Does anyone here know how to implement a progress bar in C that
> displays a series of '=' on the command line when run. I intend the
> progressbar to look like :
>
> |=>
> | [25%]
>
>
. They can be used in
combination with other keys and your program can handle 2 keys (eg Alt+A,
Ctrl+A) together or even handle 4 keys (eg Alt+Ctrl+Shift+A) together, but
only the special keys.
regards,
Arun Venkataswamy
arun289.wordpress.com
___
To unsubsc
ack
+ office consumables + tea/coffee))
then profit //survive
else loss //perish
Very funny the way you questioned the price!
Congrats to Baskar... I could not get the courage to go FOSS for my
business.
Regards,
Arun.
--
Arun Venkataswamy
http://arun289.wordpress.com
___
and LabVIEW is protected by a lot of
patents. Starting an open source equivalent might be difficult. But if
anybody is interested I am game.
reagards,
Arun
--
Arun Venkataswamy
http://arun289.wordpress.com
___
To unsubscribe, email ilugc-requ...@ae.
and hence need
to be scalable in the future (4-5 months).
- Initial budget of Rs.2,000/- to Rs 3,000/- per month.
Would like to have recommendations from this list.
Regards,
Arun Venkataswamy
http://arun289.wordpress.com
___
To unsubscribe
s for the information Kenneth & Vamsee.
I will go ahead with Linode. They also seem friendly!
regards,
Arun
--
Arun Venkataswamy
http://arun289.wordpress.com
___
To unsubscribe, email ilugc-requ...@ae.iitm.ac.in with
"unsubscribe "
in the s
On Fri, Jul 10, 2009 at 6:03 PM, balachandar muruganantham <
mbchan...@gmail.com> wrote:
>
> Please tell us what you are expecting in our site?
>
>
Would like to have the Saturday meetings webcast or video archived!
regards,
Arun
--
Arun Venkataswamy
http://aru
/timer in the 812
card.
You call also have a look at
http://www.comedi.org/<http://www.comedi.org/hardware.html>.
It's a brilliant project and there is support for the PCL812PG.
All the best.
With regards,
Arun
--
Arun Venkataswamy
http://arun289.wordpress.com
___
er cycling the
HDD. This will almost certainly lead to a crash.
--
Arun Venkataswamy
http://arun289.wordpress.com
___
To unsubscribe, email ilugc-requ...@ae.iitm.ac.in with
"unsubscribe "
in the subject or body of the message.
http://www.ae
d to sign a NDA and fax it to the USA before they
gave me the protocol for a DAQ device...
Regards,
Arun
--
Arun Venkataswamy
http://arun289.wordpress.com
___
To unsubscribe, email ilugc-requ...@ae.iitm.ac.in with
"unsubscribe "
in the subject
urns unicode Tamil kural with proper break formatting
1 returns English translation.
2 return the chapter
kural=1-1330, the kural number
The main browser UI is at http://kavyasoftapps.net/thirukural/
--
Arun Venkataswamy
http://arun289.wordpress.com
__
osiations?
--
Arun Venkataswamy
http://arun289.wordpress.com
___
To unsubscribe, email ilugc-requ...@ae.iitm.ac.in with
"unsubscribe "
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
function, I would be legally safe...
Google searches did not help much because nearly all good links were Chinese
and even the translations just sent me into circles.
Any experiences or pointers?
Regards,
Arun
--
Arun Venkataswamy
http://arun289.wordpress.com
__
On Fri, Oct 30, 2009 at 1:09 PM, Mohan Sundaram wrote:
> On 30/10/2009 13:02, Arun Venkataswamy wrote:
>
>> Has anybody in this group tried to port Linux into a phone?
>> I bought an IPhone clone from the bazaar to experiment.
>>
> Is it sold as an iPhone clone?
>
On Wed, Mar 14, 2012 at 11:53 PM, Prasanna Venkadesh
wrote:
>
> I installed it in my fedora 16 and all the above steps works fine but as
> you said Venus was behind the tree and later when i searched for Jupiter
> and Venus again the camera port is pointing downwards towards the earth,
> which mea
On Wed, Mar 14, 2012 at 3:06 PM, Roshan George wrote:
> I believe the real utility lies in using it to test your Android
> applications. The emulator is terribly slow in comparison, and if you
> make the mistake of closing it then you have to wait half a million
> years before it starts up again
On Mon, Mar 19, 2012 at 11:25 PM, Shrinivasan T wrote:
> font creation is one of their activities. but they not know about the
> unicode and other font related stuff.
>
>
Indic fonts are very difficult to create. I have worked with Mr.Murali
Krishna, an expert font developer. I used to write dongl
2012/3/20 "ம. ஸ்ரீ ராமதாஸ்"
> \>
> > Creating Indic fonts are a mix of Artistry, Carpentry (in the sense of
> > joins) and Technology. Tamil is relatively easy. Other south Indian fonts
> > require incredible number of joins to realise the entire character set.
> > Then comes the concept of `kern
2012/3/20 "ம. ஸ்ரீ ராமதாஸ்"
> Seeing him submitting to now Governor of Tamilnadu, to stop font piracy,
> there.
>
> Can you convince him to release them under OFL
> http://www.anufonts.com/tamil.html
>
>
Nope. Highly unlikely. His primary business is fonts. Piracy is killing his
business. Releasi
On Wed, Mar 28, 2012 at 12:41 PM, Ganesh Kumar wrote:
> I am asking silly doubt. Why embedded linux not having swap partition,
- From a design perspective, the design team will know how much RAM is
required for a purpose built embedded device. This amount of RAM would have
been provis
On Wed, Mar 28, 2012 at 3:05 PM, Balaji Foss wrote:
> Embedded systems generally dont have Virtual Memory because the access
> times are non deterministic.
>
>
In general, very few embedded systems really need deterministic operation.
Irrespective of virtual memory support, none of the run-of-the
On Mon, Apr 2, 2012 at 11:49 AM, Shrinivasan T wrote:
> Just wondered to see the benchmark chart here.
> http://julialang.org/
>
>
It's nice.
Thanks for the link.
On a side note, never knew JavaScript was so incredible in performance!
Regards,
Arun
___
ry coefficients.
Regards,
Arun
--
Arun Venkataswamy
"கற்றது கைமண் அளவு, கல்லாதது உலகளவு" - ஔவையார்
Known is a drop, Unknown is an ocean
A mash up I made from NASA's APOD website...
Want to see some wonders of our universe?
http://apodweekly.com and a chrome app
here<https://
reate small appliance with this. Runs on
QEMU very well.
Thought I would share this with the list.
regards,
Arun
--
Arun Venkataswamy
"கற்றது கைமண் அளவு, கல்லாதது உலகளவு" - ஔவையார்
Known is a drop, Unknown is an ocean
A mash up I made from NASA's APOD website...
Want to see
On Mon, Apr 16, 2012 at 12:23 PM, Yogesh Girikumar wrote:
> Never thought of it at this angle. So, this should automatically imply that
> "ALL" of the broadcast/telecast news (with the exception of maybe
> government channels) are all restricted with copyright, right?? *The world
> is a bad bad pl
On Mon, Apr 16, 2012 at 10:08 PM, Harisankar P S wrote:
> Can you tell if there is any opensource substitute available for
> http://www.flipcreator.net/
>
If you can program in Flex,
http://www.rubenswieringa.com/blog/flex-book-component-beta
I have used this extensively.
Regards,
Arun
On Mon, May 28, 2012 at 7:58 AM, Girish Venkatachalam <
girishvenkatacha...@gmail.com> wrote:
> An e-mail sent from mail ID A to mail ID B goes through certain
> manipulations and
> several layers of protocols and wrapping, unwrapping before it is
> delivered.
>
>
Just thinking aloud...
Does send
On Wed, May 30, 2012 at 10:55 AM, Balachandran Sivakumar <
benignb...@gmail.com> wrote:
> On Wed, May 30, 2012 at 10:01 AM, Arun Venkataswamy
> wrote:> Just thinking aloud...
> > Does sending a message from ID A to ID B along with a few attachments be
> > this complic
rough WiFi/LAN to Android based tablets
and other PCs
Thanks!
Regards,
Arun
--
Arun Venkataswamy
http://wondroussky.blogspot.in/
"கற்றது கைமண் அளவு, கல்லாதது உலகளவு" - ஔவையார்
Known is a drop, Unknown is an ocean
___
ILUGC Mai
erienced people
> > locally :)
>
> Have you tried xbmc ?
>
>
Looks great!
Thanks.
Will keep the list posted about my experience.
Regards,
Arun
--
Arun Venkataswamy
http://wondroussky.blogspot.in/
"கற்றது கைமண் அளவு, கல்லாதது உலகள
On Sat, Jun 2, 2012 at 12:40 AM, Shrinivasan T wrote:
> Do we have any such event in chennai?
>
Yes, live viewing through telescope at the planetarium or
live view through a special solar telescope at Elliot's beach at Besant
nagar.
More information here in my blog: http://wondroussky.blogspot.i
ructions.
Regards,
Arun
--
Arun Venkataswamy
http://wondroussky.blogspot.in/
"கற்றது கைமண் அளவு, கல்லாதது உலகளவு" - ஔவையார்
Known is a drop, Unknown is an ocean
___
ILUGC Mailing List:
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
On Sat, Jun 16, 2012 at 8:00 AM, Jacob G Podipara wrote:
> The biological equivalent our brain has not had a model upgrade for
> billions of years. It processes
> inputs of greater complexity, greater detail than at child stage without
> upgrades.
The process is called `learning`. Also the bra
On Sat, Jun 16, 2012 at 12:17 PM, kenneth gonsalves
wrote:
> On Sat, 2012-06-16 at 12:06 +0530, Arun Venkataswamy wrote:
> > "கற்றது கைமண் அளவு, கல்லாதது உலகளவு" - ஔவையார்
> > Known is a drop, Unknown is an ocean
>
> should this not be:
> learned is a drop, n
** Correcting my own reply on an old thread **
On Fri, Jul 15, 2011 at 5:18 PM, Arun Venkataswamy wrote:
> On Fri, Jul 15, 2011 at 11:08 AM, srinivasan kadn <
> linuxsriniva...@gmail.com> wrote:
>
>> I want to know which ide is better,
>
> Either NETBEANS or ECLIPSE.
On Mon, Jun 25, 2012 at 7:10 AM, Mohan Sundaram wrote:
> On Sun, Jun 24, 2012 at 7:42 AM, Jacob G Podipara
> wrote:
>
> > Hi;
> > Would anyone be able to give some inputs regarding drawing software to
> > generate architectural and
> > structural drawings like AutoCAd and comparison thereof.
>
Hi,
Gimp is limited to handling 8 bit color depth only.
Any pointers to a good alternative in Linux to handle 16 bit color depth?
I use UFRaw to manage raw file from the camera and it handles all color
depths. But I need something interactive like Gimp for post processing.
Also, anybody else inte
On Mon, Jun 25, 2012 at 12:23 PM, Rajagopal Swaminathan <
raju.rajs...@gmail.com> wrote:
> Greetings,
>
> On Mon, Jun 25, 2012 at 11:31 AM, Arun Venkataswamy
> wrote:
> > Hi,
> >
> > Gimp is limited to handling 8 bit color depth only.
>
> From: ht
On Mon, Jun 25, 2012 at 12:00 PM, Balasubramaniam Natarajan <
bala150...@gmail.com> wrote:
> I don't have much idea about this, How about imagemagick ?
>
>
Imagemagick supports it. But I am looking for an interactive tool.
Specifically to stretch colors. This has to be done interactively as human
On Mon, Jun 25, 2012 at 1:20 PM, amartyo banerjee wrote:
> Hi,
>
> On Mon, Jun 25, 2012 at 12:30 PM, Arun Venkataswamy
> wrote:
> > On Mon, Jun 25, 2012 at 12:00 PM, Balasubramaniam Natarajan <
> > bala150...@gmail.com> wrote:
> >
> >> I don'
On Mon, Jun 25, 2012 at 3:06 PM, amartyo banerjee wrote:
> On Mon, Jun 25, 2012 at 11:31 AM, Arun Venkataswamy
> wrote:> Also, anybody else interested in long exposure photography and/or
> astro
> > photography? One tool which is an absolute must is a stacking software.
On Tue, Jun 26, 2012 at 1:26 PM, kenneth gonsalves
wrote:
> On Mon, 2012-06-25 at 09:38 +0530, Arun Venkataswamy wrote:
> > That's the state of our nation. Draftsmen who think they are engineers
> > and
> > engineers who forget that any software is a tool. At least t
On Tue, Jul 3, 2012 at 10:51 PM, ARUN PALANIAPPAN <
arunpalaniappan@gmail.com> wrote:
> Sir
>
> I am a poor Mechanical Engineer, who out of my interest is trying to serve
> the Open Source Community. I neither work for a Software Company nor
> learned any Software professionally.
>
>
Replace "
dly relieve me from the list.
>
> Thank you
>
> --
> Regards,
> ARUN P
>
>
>
> A Tailor’s mistake is a Fashion But, An Engineer’s mistake is a Disaster.
>
> "Preserve the earth; Else we will perish"
> ___
On Thu, Jul 5, 2012 at 11:00 PM, A. Mani wrote:
> http://www.berkeleylug.com/?p=1045
> Informative.
>
>
Interesting link.
For me personally it's a love-hate interest towards Apple.
Love their art. Hate their control.
Greatest industrial engineering company ever.
BTW, their new mac book pros wit
The Voyager 1 and Voyager 2 space crafts are nearing interstellar space and
can enter the realm between the stars any time now. They are around 15
billion kms from earth now. Both of them carry a gold LP record
(gramophone record). The record contains sounds from the planet earth.
Sounds of the ea
On Thu, Jul 12, 2012 at 4:54 PM, kenneth gonsalves
wrote:
> Disk /dev/sda: 160.0 GB, 160041885696 bytes
> 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
> Units = sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optim
On Thu, Jul 12, 2012 at 4:54 PM, kenneth gonsalves
wrote:
Total size:
> 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
>
sda5 partition:
> /dev/sda5 223236096 31258009544672000 83 Linux
>
312581808-312580095 = 1713
~ 1713 X 512 = 877056 bytes = 856.5 k byt
On Thu, Jul 12, 2012 at 8:04 PM, Rajagopal Swaminathan <
raju.rajs...@gmail.com> wrote:
> Scenario:
> I have scanned a book in a4 size (set-1 of files)
> I have scanned separately other sizes -- say a3 and a1 (typical
> foldouts in a book) (set-2 of files)
>
> Now I want to make a single file cont
On Sat, Jul 14, 2012 at 1:14 PM, ஆமாச்சு wrote:
> For couple of my upcoming projects am looking forward to colloborate
> with biometric attendance, swipe card attendance, thermal printer, dot
> matrix printer vendors/ manufacturers offering such devices that are
> GNU/ Linux friendly.
>
>
@Ramdos
On Sun, Jul 15, 2012 at 6:54 PM, Balasubramaniam Natarajan <
bala150...@gmail.com> wrote:
> Host OS is connected through Wired LAN to a router. Can my Guest use the
> wireless adaptor which is currently no being using in my host to connect to
> the outside world ?
>
> When I searched the net many
On Mon, Jul 16, 2012 at 12:19 PM, Balasubramaniam Natarajan <
bala150...@gmail.com> wrote:
> > In my mac (BSD based) it works. You need to setup Virtual box to use the
> > host's wireless adapter in bridged mode. Set this bridge mode network
> > adapter as your second network interface in your gue
On Tue, Jul 17, 2012 at 11:30 PM, snegan wrote:
> aim using linux mint 13 i couldn't con fig ppp con fig it is showing
> following error
>
> anwar@anwar-Lenovo-G560 ~/Desktop $ sudo ppp config
> [sudo] password for anwar:
> anwar is not in the sudoers file. This incident will be reported.
> anwa
On Thu, Jul 19, 2012 at 11:10 AM, ஆமாச்சு wrote:
> On Saturday 14 July 2012 04:00 PM, Arun Venkataswamy wrote:
> > @Ramdoss, I understand for a commercial project, you require
> > vendor/manufacturer support for Linux.
>
> one problem apart from availability of driver f
Hi,
Has anybody in this list or people you know - have made money by creating
open source products? I am not talking about people who earn money by
providing services around someone else's effort of creating the primary,
core product (say the LAMP stack). I am talking about people who are
creativ
On Wed, Jul 25, 2012 at 1:15 PM, Sankarshan Mukhopadhyay <
sankarshan.mukhopadh...@gmail.com> wrote:
>
> A significant part of the 'open source' is the concept of "open a
> restaurant but give away the menu". In effect, the availability of the
> source code of the product enables two distinct stre
On Wed, Jul 25, 2012 at 1:20 PM, satyaakam goswami wrote:
> i give this simple analogy to students as what they want to be , there
> are gold rush people ( the guys with one idea and want to make it big
> through product or service ) and people who will be making spades (
> the guys who actually
On Thu, Jul 26, 2012 at 9:33 PM, ARUN PALANIAPPAN <
arunpalaniappan@gmail.com> wrote:
> Hi all,
>
> We have data acquisition system which works in Windows. After acquisition,
> the data automatically gets plotted (I think so!!) in a software called
> Easy Plot.
>
Do you only want to use the d
On Fri, Aug 3, 2012 at 3:25 PM, JAGANADH G wrote:
> Hi All,
>
> Just now I got a message that our dear KG (Kenneth Gonsalvas) passed away.
> He was admitted in hospital due to Asthma attack and passed away today
> morning.
>
Very very sad news. My condolences to his friends and family.
Kenneth
On Sun, Aug 12, 2012 at 7:28 PM, Karthikeyan A.K wrote:
> I am an electronics engineer and an entrepreneur, but I make a living by
> writing code. I don't even know to solder a diode to a PCB. I also realize
> that many many people who claim to be electronic engineers face this issue.
> So to turn
On Sat, Aug 18, 2012 at 10:48 PM, ARUN PALANIAPPAN <
arunpalaniappan@gmail.com> wrote:
> Scribus was not rendering Tamil fonts correctly. Hence, I planned to switch
> over..
> Inkscape is a good solution!
>
>
Inkscape is great but is limited to a single page. You will have to use a
separate fi
On Sun, Aug 19, 2012 at 12:45 PM, Vignesh Nandha Kumar <
viky.nan...@gmail.com> wrote:
> On Sun, Aug 19, 2012 at 11:33 AM, Rajagopal Swaminathan <
> raju.rajs...@gmail.com> wrote:
>
> > On Sun, Aug 19, 2012 at 10:37 AM, Vignesh Nandha Kumar
> > wrote:
> > > Equation 2 in http://en.wikipedia.org/w
On Mon, Aug 20, 2012 at 2:42 PM, Balasubramaniam Natarajan <
bala150...@gmail.com> wrote:
> If I want to extract just the Duration of a FLV file alone with a file
> name, how should I do it?
>
From the command line:
ffmpeg -i filename.flv
You need to install ffmpeg though.
Regards,
Arun
http://
gt; >
> >
> Sir,
> Now I am just learning and making few trials...
> yes.. I think it may prove to be addictive!!
> But, whether getting that addict is healthy?
>
Strike a balance. In the real world (work, corporate) you will have to
exchange collaborative documents in doc form
I am trying out a FreeSWITCH based VoIP system. There is a considerable,
around 1.5 seconds lag on the audio. Some improvement was seen when the
server was switched from an Amazon EC2 small instance to an Amazon EC2
medium instance. Considering India specific customers and usage, is it
reasonable t
On Wed, Aug 22, 2012 at 12:35 PM, Shrinivasan T wrote:
> Found a nice video on how releasing the photographs for free and in
> creative commons can bring lot of money.
> http://kalyanvarma.net/about
Nice info.
Thanks for sharing.
Regards,
Arun
http://wondroussky.blogspot.in/
"கற்றது கைமண் அளவு
On Wed, Aug 22, 2012 at 2:01 PM, Venkatraman S wrote:
> Yup - this thing works, if not for the money, atleast it gives you the
> satisfaction.
> I recently was approached by BBC Worldwide for one of my clicks - gave it
> away for free.
>
>
Congratulations!
Can you send the link to the photo?
Reg
On Thu, Aug 23, 2012 at 1:02 PM, deva free wrote:
> I am trying out the new Ubuntu 12.04 64 bit server. I find the scripts in
> init.d are not starting up on boot. The permissions are correct. I can
> manually start with service start (whereever service works)
> or /etc/init.d/scriptname start.
On Sun, Aug 26, 2012 at 9:46 PM, Karthikeyan A.K wrote:
> Well,
>
> Who cares, if one does successful work, there are ten to bark. If I keep
> throwing stones on every dog that barks, I may never reach destination.
>
> So I will continue with my work. If you want, take it, else close your
> eyes.
On Wed, Aug 29, 2012 at 10:53 AM, saravana babu wrote:
> I am searching for swing plugin in eclipse(ubuntu 10:10).I need url to
> download swing plugin.please help me.
>
>
Do you want to develop swing apps in Eclipse?
Regards,
Arun
http://wondroussky.blogspot.in/
"கற்றது கைமண் அளவு, கல்லாதத
On Wed, Aug 29, 2012 at 6:27 PM, satyaakam goswami wrote:
> On Wed, Aug 29, 2012 at 6:21 PM, Karthikeyan A.K
> wrote:
> > That's a complex task. I can't.
> @Srinivas have a simple form in google doc or some place then put the
> info wherever or what ever form you want , i have seen people being
On Mon, Sep 3, 2012 at 9:43 AM, Marikkannan Rajagopal <
mail2marikkan...@gmail.com> wrote:
> it will ask the user name and password,i given the ftp user name and
> password it will show the accessing directory.But i connected the same ftp
> server through file zilla (ftp client),it didn't conn
I urgently require a TV Tuner card for a demo. USB or PCI.
Can anyone suggest a Linux compatible brand/model which I can easily get
from Chennai?
Purpose is to stream from a video camera (AV out) + audio to a RED5 media
server.
Regards,
Arun
http://wondroussky.blogspot.in/
"கற்றது கைமண் அளவு, கல
configured the ftp user listening
> directory as per my requirement.
>
>
Is the server accessible from your machine through SSH?
Arun Venkataswamy
http://wondroussky.blogspot.in/
"கற்றது கைமண் அளவு, கல்லாதது உலகளவு" - ஔவையார்
Kn
On Mon, Sep 3, 2012 at 8:36 PM, Arun Khan wrote:
> Look for a card that has the bttv chip set and it should work fine in
> Linux. About 18 months I got a a WinTV (PCI) card that works fine.
> It might be hard to get in the retail channels. Try ebay.in and
> search for Hauppauge or WinTV
>
>
Th
Hi,
For a remote data acquisition project, I need a Linux box connected to the
internet through 3G. I have gone through list archives, but the threads are
over a year old and want some current information. Is there any 3G service
provider with:
- A modem which simply works out of the box. I wi
On Wed, Sep 26, 2012 at 9:19 AM, Tushar Rishabadas <
tushar.rishaba...@gmail.com> wrote:
> If yes, could use a 3G router and get away with lesser pain, Imho..
>
This is a really good option.
But for the current project, I need to bundle all the hardware into a
mini-itx cabinet. This might be a ha
On Wed, Sep 26, 2012 at 9:43 AM, Tushar Rishabadas <
tushar.rishaba...@gmail.com> wrote:
> > Small ones, with ethernet:
>
> http://www.deltapage.com/products/Asus-Pocket-3g-Router-WL%252d330N3G-%3A-WL%252d330N3G.html
> http://www.deltapage.com/products/HUAWEI-%3A-D100-3G-Wireless-Router.html
>
> S
On Wed, Sep 26, 2012 at 10:33 AM, Arun Khan wrote:
> On Wed, Sep 26, 2012 at 9:13 AM, Arun Venkataswamy
> wrote:
> > Hi,
> >
> > For a remote data acquisition project, I need a Linux box connected to
> the
> > internet through 3G. I have gone through lis
On Mon, Oct 1, 2012 at 11:11 PM, Madan U Sreenivasan wrote:
> Fwding Prof. Santhanam's further reply below.
> On Mon, Oct 1, 2012 at 10:11 PM, Tiruvenkadam santhanam <
> santhanam_d...@yahoo.com> wrote:
>
> > The program after getting the approval of the college management (if we
> > are intereste
On Tue, Oct 2, 2012 at 6:11 AM, Raman.P wrote:
> --- On Tue, 2/10/12, Arun Venkataswamy wrote:
>
> > [Personal Opinion]
> > Unfortunate that such a large college wants free beer. In
> > the spirit of
> > "increasing employment opportunity" I t
On Tue, Oct 2, 2012 at 11:55 AM, Manokaran K wrote:
> On Tue, Oct 2, 2012 at 6:11 AM, Raman.P wrote:
>
> >
> > I am afraid by needless discussions we have reduced our standings in his
> > view.
> >
> >
> Concur 100%. Unnecessarily bringing him into the loop ( on something which
> should have bee
On Tue, Oct 2, 2012 at 4:31 PM, Raman.P wrote:
> --- On Tue, 2/10/12, Arun Venkataswamy wrote:
>
> > > This is not free beer. The trainers will be paid by the
> > college.
> > >
> >
> > This was never mentioned anywhere in the thread. As a person
>
On Wed, Sep 26, 2012 at 9:13 AM, Arun Venkataswamy wrote:
> Hi,
>
> For a remote data acquisition project, I need a Linux box connected to the
> internet through 3G. I have gone through list archives, but the threads are
> over a year old and want some current information. Is there
On Wed, Oct 10, 2012 at 10:59 AM, Arun Khan wrote:
> On Wed, Oct 10, 2012 at 10:11 AM, Arun Venkataswamy
> wrote:
>
> >
> > I have a headless Ubuntu 12.04 server and I have a C application which
> has
> > to run on system startup *AND* the C application has to have
On Thu, Oct 11, 2012 at 10:59 AM, Vignesh Rajendran
wrote:
> would be great if it can run on tty0 and allow getty to run on other tty's
> > for debugging. Is this possible? Some searching on the net gave me
> > directions, but would like to hear from somebody on the list who can
> help.
> >
> >
>
1 - 100 of 323 matches
Mail list logo
